inputs. The device can support 10MHz - 25MHz parallel
resonant crystals by connecting external capacitors between
XTALIN/XTALOUT and ground. The select pins have
internal pulldown resistors and leaving one input
unconnected (pulled to logic low by the internal resistor) will
transform the device into a 2:1 multiplexer. The SEL1 lead is
the most significant line and the binary number applied to
the select pins will select the same numbered data input (i.e.,
00 selects XTALIN0/XT ALOUT0).
The ICS85357-11 is a 4:1 or 2:1, Crystal
Oscillator-to-3.3V LVPECL / ECL Multiplexer and
is a member of the HiPerClockS™ family of High
Performance Clock Solutions from ICS. The
ICS85357-11 has 4 selectable crystal
FEATURES
• 1 differential 3.3V LVPECL output
• 4:1 or 2:1 Crystal Oscillator Multiplexer
• Supports parallel resonant crystals with a frequency range
of 10MHz - 25MHz. The oscillator circuit is optimized for
parallel resonant mode, and will require external capacitance
• Maximum output frequency up to 25MHz
• LVCMOS SEL0 and SEL1 inputs have internal pulldown
resistors
• Part-to-part skew: 150ps (maximum)
• Propagation delay: 2ns (maximum)
• LVPECL mode operating voltage supply range:
= 3.135V to 3.465V , VEE = 0V
V
CC
• ECL mode operating voltage supply range:
= 0V , VEE = -3.135V to -3.465V
V
CC
• 0°C to 70°C ambient operating temperature
• Industrial temperature information available upon request
BLOCK DIAGRAMPIN ASSIGNMENT
VCC
XTALIN0
XTALOUT0
XTALIN0
XTALOUT0
XTALIN1
XTALOUT1
XTALIN2
XTALOUT2
XTALIN3
XTALOUT3
OSC
OSC
OSC
OSC
00
01
10
11
Q0
nQ0
SEL0SEL1
XTALIN1
XTALOUT1
XTALIN2
XTALOUT2
XTALIN3
XTALOUT3
V
EE
ICS85357-11
20-Lead TSSOP
4.40mm x 6.50mm x 0.92mm body package
20
1
19
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
G Package
T op View
V
CC
SEL1
SEL0
V
CC
Q0
nQ0
V
CC
nc
nc
V
EE
85357AG-11www.icst.com/products/hiperclocks.htmlREV. A JULY 25, 2001
85357AG-11www.icst.com/products/hiperclocks.htmlREV. A JULY 25, 2001
2
Integrated
Circuit
Systems, Inc.
4:1 OR 2:1, CR YSTAL OSCILLA TOR-TO-3.3V
LVPECL / ECL M
ICS85357-11
UL TIPLEXER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
Inputs, V
I
Outputs, V
Package Thermal Impedance, θ
Storage T emperature, T
CC
O
JA
STG
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings
are stress specifications only . Functional operation of product at these conditions or any conditions beyond those listed in the
DC Characteristics
or
AC Characteristics
ods may affect product reliability.
4.6V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
73.2°C/W (0lfpm)
-65°C to 150°C
is not implied. Exposure to absolute maximum rating conditions for extended peri-