DIFFERENTIAL-TO-3.3V LVPECL / ECL CLOCK MUL TIPLEXER
GENERAL DESCRIPTION
,&6
HiPerClockS™
selectable clock inputs. The CLK, nCLK pair can accept most
standard differential input levels. The device can operate
using a 3.3V LVPECL (V
3.3V ECL (V
ferential architecture and low propagation delay make it
ideal for use in clock distribution circuits. The select pins have
internal pulldown resistors. Leaving one input unconnected
(pulled to logic low by the internal resistor) will transform
the device into a 2:1 multiplexer. The SEL1 pin is the most
significant bit and the binary number applied to the select pins
will select the same numbered data input (i.e., 00
selects CLK0, nCLK0).
The ICS85357-01 is a 4:1 or 2:1 Differential-to-
3.3V LVPECL / ECL clock multiplexer which can
operate up to 750MHz and is a member of the
HiPerClockS™ family of High Performance Clock
Solutions from ICS. The ICS85357-01 has 4
= 0V, VCC = 3.135V to 3.465V) or
= 0V , VEE = -3.135V to -3.465V). The fully dif-
CC
EE
FEATURES
• High speed differential multiplexer. The device can be
configured as either a 4:1 or 2:1 multiplexer
• 1 differential 3.3V LVPECL output
• 4 selectable CLK, nCLK inputs
• CLK, nCLK pair can accept the following differential input
levels: L VDS, L VPECL, L VHSTL, SSTL, HCSL
• Maximum output frequency up to 750MHz
• Translates any single ended input signal to 3.3V L VPECL
levels with resistor bias on nCLKx input
• Part-to-part skew: 150ps (maximum)
• Propagation delay: 1.5ns (maximum)
• LVPECL mode operating voltage supply range:
= 3.135V to 3.465V , VEE = 0V
V
CC
• ECL mode operating voltage supply range:
= 0V , VEE = -3.135V to -3.465V
V
CC
• 0°C to 70°C ambient operating temperature
• Industrial temperature information available upon request
BLOCK DIAGRAMPIN ASSIGNMENT
V
CLK0
nCLK0
CLK1
nCLK1
CLK2
nCLK2
CLK3
nCLK3
00
01
10
11
Q0
nQ0
VCC
CLK0
nCLK0
CLK1
nCLK1
CLK2
nCLK2
CLK3
nCLK3
V
EE
ICS85357-01
SEL0
SEL1
85357AG-01www.icst.com/products/hiperclocks.htmlREV. A JULY 16, 2001
1
4.40mm x 6.50mm x 0.90mm body package
20-Lead TSSOP
20
1
19
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
G Package
Top View
CC
SEL1
SEL0
V
CC
Q0
nQ0
V
CC
nc
nc
V
EE
Integrated
Circuit
Systems, Inc.
DIFFERENTIAL-TO-3.3V LVPECL / ECL CLOCK MUL TIPLEXER
85357AG-01www.icst.com/products/hiperclocks.htmlREV. A JULY 16, 2001
2
Integrated
Circuit
Systems, Inc.
ICS85357-01
4:1 OR 2:1
DIFFERENTIAL-TO-3.3V LVPECL / ECL CLOCK MUL TIPLEXER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
Inputs, V
I
Outputs, V
Package Thermal Impedance, θ
Storage T emperature, T
CC
O
JA
STG
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings
are stress specifications only . Functional operation of product at these conditions or any conditions beyond those listed in the
DC Characteristics
or
AC Characteristics
ods may affect product reliability.
4.6V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
73.2°C/W (0lfpm)
-65°C to 150°C
is not implied. Exposure to absolute maximum rating conditions for extended peri-