able differential clock or crystal inputs. The CLK, nCLK pair
can accept most standard differential input levels. The clock
enable is internally synchronized to eliminate runt pulses on
the outputs during asynchronous assertion/deassertion of the
clock enable pin.
Guaranteed output and part-to-part skew characteristics
make the ICS8533-11 ideal for those applications demanding well defined performance and repeatability.
The ICS8533-11 is a low skew , high performance
1-to-4 Crystal Oscillator/Differential-to-3.3V
LVPECL fanout buffer and a member of the
HiPerClockS™ family of High Performance Clock
Solutions from ICS. The ICS8533-1 1 has select-
FEATURES
• 4 differential 3.3V LVPECL outputs
• Selectable CLK, nCLK or crystal inputs
• CLK, nCLK pair can accept the following differential input
levels: L VDS, L VPECL, L VHSTL, SSTL, HCSL
• Maximum output frequency up to 650MHz
• Translates any single-ended input signal to 3.3V
L VPECL levels with resistor bias on nCLK input
• Output skew: 30ps (maximum)
• Part-to-part skew: 150ps (maximum)
• Propagation delay: 2ns (maximum)
• 3.3V operating supply
• 0°C to 70°C ambient operating temperature
• Industrial temperature information available upon request
BLOCK DIAGRAMPIN ASSIGNMENT
CLK_EN
CLK
nCLK
XTAL1
XTAL2
CLK_SEL
D
Q
LE
0
1
Q0
nQ0
Q1
nQ1
Q2
nQ2
Q3
nQ3
6.5mm x 4.4mm x 0.92 Package Body
VEE
CLK_EN
CLK_SEL
CLK
nCLK
XTAL1
XTAL2
nc
nc
V
CC
ICS8533-11
20-Lead TSSOP
20
1
19
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
G Package
Top View
Q0
nQ0
V
CC
Q1
nQ1
Q2
nQ2
V
CC
Q3
nQ3
8533AG-11www.icst.com/products/hiperclocks.htmlREV. D JULY 16, 2001
8533AG-11www.icst.com/products/hiperclocks.htmlREV. D JULY 16, 2001
3
Integrated
Circuit
Systems, Inc.
LOW SKEW, 1-TO-4, CRYSTAL OSCILLA TOR/
ICS8533-11
DIFFERENTIAL-TO-3.3V LVPECL FANOUT BUFFER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
Inputs, V
Outputs, V
I
O
Package Thermal Impedance, θ
Storage Temperature, T
CCx
JA
STG
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These
ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond those
listed in the
DC Characteristics
or
AC Characteristics
extended periods may affect product reliability .
4.6V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
73.2°C/W (0lfpm)
-65°C to 150°C
is not implied. Exposure to absolute maximum rating conditions for