The CLK, nCLK pair can accept most standard differential
input levels. The PCLK, nPCLK pair can accept L VPECL, CML,
or SSTL input levels. The clock enable is internally synchronized to eliminate runt pulses on the outputs during asynchronous assertion/deassertion of the clock enable pin.
Guaranteed output and part-to-part skew characteristics
make the ICS8533-01 ideal for those applications demanding
well defined performance and repeatability.
The ICS8533-01 is a low skew, high performance 1-to-4 Differential-to-3.3V L VPECL fanout
buffer and a member of the HiPerClockS™ family
of High Performance Clock Solutions from ICS.
The ICS8533-01 has two selectable clock inputs.
FEATURES
• 4 differential 3.3V L VPECL outputs
• Selectable CLK, nCLK or L VPECL clock inputs
• CLK, nCLK pair can accept the following differential input
levels: L VDS, LVPECL, HSTL, SSTL, HCSL
• PCLK, nPCLK supports the following input types:
LVPECL, CML, SSTL
• Maximum output frequency up to 650MHz
• Translates any single-ended input signal to 3.3V L VPECL
levels with resistor bias on nCLK input
• Output skew: 30ps (maximum)
• Part-to-part skew: 150ps (maximum)
• Propagation delay: 1.4ns (maximum)
• 3.3V operating supply
• 0°C to 70°C ambient operating temperature
• Industrial temperature information available upon request
BLOCK DIAGRAMPIN ASSIGNMENT
20
1
CLK_EN
CLK
nCLK
PCLK
nPCLK
CLK_SEL
D
Q
LE
0
1
Q0
nQ0
Q1
nQ1
Q2
nQ2
Q3
nQ3
6.5mm x 4.4mm x 0.92mm Package Body
VEE
CLK_EN
CLK_SEL
CLK
nCLK
PCLK
nPCLK
nc
nc
V
CC
ICS8533-01
20-Lead TSSOP
2
3
4
5
6
7
8
9
10
G Package
Top View
8533AG-01www.icst.com/products/hiperclocks.htmlREV. B JULY 16, 2001
8533AG-01www.icst.com/products/hiperclocks.htmlREV. B JULY 16, 2001
3
Integrated
Circuit
Systems, Inc.
ICS8533-01
LOW SKEW, 1-TO-4
DIFFERENTIAL-TO-3.3V LVPECL FANOUT BUFFER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
Inputs, V
I
Outputs, V
Package Thermal Impedance, θ
Storage T emperature, T
CCx
O
JA
STG
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings
are stress specifications only . Functional operation of product at these condition or any conditions beyond those listed in the
DC Characteristics
or
AC Characteristics
ods may affect product reliability .
4.6V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
73.2°C/W (0lfpm)
-65°C to 150°C
is not implied. Exposure to absolute maximum rating conditions for extended peri-