ICST ICS615M, ICS615MT Datasheet

PRELIMINARY INFORMATION
ICS615
I CR O
C
LOC K
Description
The ICS615 is a low cost, low jitter, high performance PLL clock synthesizer designed to replace 13.5, 27, and 54MHz crystals and oscillators. Using analog/digital Phase-Locked Loop (PLL) techniques, the device uses an inexpensive external 13.5 MHz crystal or clock input to produce output clocks of 13.5 MHz, 27 MHz, and 54 MHz .
ICS/MicroClock manufactures the largest variety of Set-Top Box and multimedia clock synthesizers for all applications. Our patented integrated VCXO further reduces component count and cost (see the MK2720). If more than three clock outputs are needed, see the MK277x family of parts. Consult ICS/MicroClock to eliminate VCXOs, PLLs, crystals and oscillators from your board.
Set-Top Box Clock Source
Features
• Packaged in 8 pin narrow SOIC
• Output clocks of 54, 27, and 13.5MHz
• Uses a 13.500 MHz clock or external crystal
• Full CMOS outputs with 25mA output drive capability at TTL levels
• Low skew outputs
• Advanced, low power, sub-micron CMOS process
• +3.3V or +5V operating voltage
• See the MK2720 for these frequencies plus the VCXO function, in an 8 pin SOIC.
13.5 MHz Clock or Crystal
X1
X2
VDD GND
Input Buffer/ Crystal
Oscillator
PLL/Clock
Synthesis Circuitry
Output
Buffer
Output
Buffer
Output
Buffer
54 MHz Clock
27 MHz Clock
13.5 MHz Clock
MDS 615 A 1 Revision 052098 Printed 11/15/00
Integrated Circuit Systems, Inc.•525 Race Street•San Jose•CA•95126•(408)295-9800tel•www.icst.com
PRELIMINARY INFORMATION
ICS615
Pin Assignment
I CR O
C
LOC K
ICS615
27M NC
GND
X1
X2
1 8 2
3 4
7 6
5
8 pin (150 mil) SOIC
13.5M 54M
Set-Top Box Clock Source
VDD
Pin Descriptions
Number Name Description
1 27M 27 MHz clock output. 2 GND Connect to ground. 3 X1 Crystal connection. Connect to a13.5 MHz clock or crystal. 4 X2 Crystal connection. Connect to a 13.5 MHz crystal. Leave unconnected for clock input. 5 54M 54 MHz clock output. 6 13.5M 13.5 MHz clock output. 7 VDD VDD. Connect to +3.3V or +5V. 8 NC No Connect. This is an unused power down pin for 27 MHz clock
MDS 615 A 2 Revision 052098 Printed 11/15/00
Integrated Circuit Systems, Inc.•525 Race Street•San Jose•CA•95126•(408)295-9800tel•www.icst.com
Loading...
+ 2 hidden pages