ICS SpeedHook 823H, SpeedHook 813M, SpeedHook 853PRO, SpeedHook 880F4, SpeedHook 814PRO Operator's Manual
...
SpeedHook
Concrete Cutting System
®
OPERATOR’S MANUAL
© 2012 ICS, Blount International Inc. Specications are subject to change without notice. REV1112 F/N 70569
Hydraulic Saws
TABLE OF CONTENTS
TITLESpeedHook® OPERATOR’S MANUAL
SYMBOLS & LABELS 4
SAFETY 5
TECHNICAL SPECIFICATIONS 6
SET-UP
• 823H / 853PRO / 880F4 7
• 813M / 814PRO 8
OPER ATION 9
CUTTING TIPS 10
TROUBLESHOOTING 11
© 2012 ICS, Blount International Inc. Specications are subject to change without notice. REV1112 F/N 70569
3
SYMBOLS & LABELS
THE FOLLOWING SYMBOLS & DEFINITIONS ARE FOUND THROUGHOUT THIS MANUAL AND
ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR UNSAFE PRACTICES.
SpeedHook® OPERATOR’S MANUAL
WARNING
CAUTION
IMPORTANT
THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE SAW
A potentially hazardous situation exists which, if not avoided,
could result in death or serious injury.
A potentially hazardous situation exists which, if not avoided,
may result in minor or moderate injury or property damage.
A potential situation exists which, if not avoided, may result in
product or property damage.
Read the operator’s manual carefully and understand the
contents before you use this equipment.
Always use:
• Protective helmet
• Ear protection
• Protective glasses or full face protection
Wear hand protection
4
© 2012 ICS, Blount International Inc. Specications are subject to change without notice. REV1112 F/N 70569
Loading...