icron 100-POE4 Datasheet

THE INDUSTRIAL NETWORK COMPANY

The

N-TRON

®

100-POE4

Industrial PoE Mid-Span
Injector is designed to trasmit power along with data over an
Ethernet network. It is ideal for powering PoE capable devices
where running an AC power feed is either not possible or cost
effective. PoE allows an end user to power a PoE camera,
wireless access point, or any other PoE capable device without
the need for running separate wires for power. This also allows
the ability for a centralized battery backup for all these devices.

PRODUCT FEATURES

• Compact, Space Saving Package

• IEEE 802.3af Compliance

• American Bureau of Shipping (ABS) Type Approval

• EN50155 for Railway applications

• Four 10/100BaseTX RJ-45 Ports (Data In)

• Four 10/100BaseTX RJ-45 PoE Ports
(Data & Power Out)

• Unmanaged Operation

• Extended Environmental Specifi cations

•-40ºC to 85º Operating Temperature

• Automatic Detection of Connected PoE Devices

• Up to 0.8 Gb/s Maximum Throughput

• Full Wire Speed Communications

• Supports 15.4 Watts per port
(13 Watts at the PD)

• Redundant Power Inputs (46-49 VDC)

• Power Fault Status LED

• LED PoE Status Indication

• Hardened Metal DIN-Rail Enclosure

PRODUCT OVERVIEW

Ideal for upgrading non-PoE network infrastructures with
PoE capabilities, the

100-POE4

Injector is designed to solve the most demanding industrial
communications requirements by providing high throughput
and minimum downtime while also providing power to PoE
capable devices over the existing Ethernet network.

The

100-POE4

provides four pairs of two RJ-45
10/100BaseTX copper ports. Each pair consists of one
RJ-45 port that connects to an existing network, and one
RJ-45 PoE capable port that can send data and, up to 15.4 watts
of power to a PoE capable device. The data on all four pairs
are isolated from each other allowing for ease in upgrading
non-PoE network infrastructures.

Industrial PoE Mid-Span

105FX-POE

The

automatically detects any PoE device
that is connected and powers it accordingly . If a PoE fault is
detected on a specific port the Auto-disconnect feature
disables PoE power on that port, allowing only data
communications to pass. This reduces the risk of damaging

costly equipment.

100-POE4

The

is an ideal candidate for providing data and
power to wireless LAN access points, network cameras, VoIP ,
and other PoE capable devices. The product also helps

reduce costs by eliminating the need for electrical wiring and
electrician expenses.

The

100-POE4

has extended operating environmental
specifications to meet the harsh needs of the industrial
environment. For cost savings and convenience the device
can be DIN-Rail mounted alongside Ethernet I/O or other
Industrial Equipment.

T o increase reliability the

100-POE4

provides dual redundant
power inputs. Dual LED's indicate that power is being applied
with a valid power source on the respective redundant power
input. This allows for easy monitoring of the two redundant
power inputs. A global power LED is also present at the top
of the unit to indicate an overall valid power source or when
a power bus fault occurs.

THE INDUSTRIAL NETWORK COMPANY

100-POE4 SPECIFICATIONS

Case Dimensions

Height: 3.5" (8.9cm)
Width: 1.5" (3.8 cm)
Depth: 3.6" (9.0 cm)
Weight: 0.7 lbs. (0.32 kg)
DIN-Rail: 35mm

Electrical

Input Voltage: 46-49 VDC
Steady Input Current

Under Full Load: 1.6 A@48V
Steady Input Current

Under No Load: 30mA@48V
Inrush: 27Amp/1.5ms@48V

Environmental

Operating Temperature: -40
Storage Temperature: -40
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.

o

C to 85oC

o

C to 85oC

BENEFITS

PoE Industrial Network PSE

• Compact Size / Small Footprint

• Ability to Power Devices via LAN

• Eliminates need for Costly Electrical Wiring

• Extended Environmental Specifi cations

• Hardened Metal DIN-Rail Enclosure

• High Performance

• High MTBF >2M Hours

• ESD Protection Diodes on RJ-45 Ports

• Surge Protection Diodes on Power Inputs

Ease of Use

• Plug & Play Operation

• Unmanaged Operation

• Ideal for Network Expansion

• Auto-Detection of Connected PoE Devices

• Dual PoE Status LED's per port

Increased Performance

• Full Wire Speed Communications

• Auto-Disconnect of PoE Port if Fault is Detected

Reliablity

MTBF: >2 Million Hours

Network Media

10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable

Connectors

10/100BaseTX: Eight (8) RJ-45
Copper Ports

Recommended Wiring Clearance

Front: 2" (5.08 cm)
Top: 1" (2.54 cm)

Ordering Information

100-POE4 Four Pair 10/100BaseTX Ports
Four POE Ports

NTPS-48-5 DIN-Rail Power Supply
48V@ 5 Amp

Regulatory Approvals

FCC Title 47 Part 15 Class A
UL Listed (US and Canada) per ANSI/ISA-12.12.01-2000,

Class I, Div 2, Groups A,B,C,D,T4A
ICES-003- Class A

CE: EN61000-6-2,4
EN61000-4-2,3,4,5,6
EN55011

ABS Type Approval for Shipboard Applications
DNV Type Approval Certifi cation
EN50155 for Railway Applications
GOST-R Certifi ed; RoHS Compliant

Designed to comply with:
IEEE 1613 for Electric Utility Substations;
NEMA TS1/TS2 for Traffi c Control Equipment

Contact Information

N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL 36609 USA 6330 Cham / Zg Switzerland
TEL: [phone] TEL: [phone]
FAX: [phone] FAX: [phone]
Website: www.n-tron.com
Email: [e-mail]

REV 090805

® 2009

N-TRON

, Corp.

N-TRON

and the

N-TRON

may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application

N-TRON

of
shall not be liable for any damage resulting from the installation, use, or misuse of this product.

products rests with the end user.

N-TRON

logo are trademarks of

makes no warranties as to the fi tness or suitability of any

N-TRON

, Corp. Product names mentioned herein are for identifi cation purposes only and

N-TRON

Printed in USA.

product for any specifi c application.

N-TRON

Corporation