i-500
Product
Information Guide
Welcome. You are using BT Handset
with iPhone5 charger.
This guide contains helpful information
that enables you to enjoy all of the features
of your BT handset.
Introduction
Thank you for purchasing the BT handset. The new
product offers you a unique, wireless experience using
Bluetooth wireless technology. It is
Siri feature, offering wireless connections
Please read this guide before use and kindly note that the
contents in this guide may be updated without notice.
The BT handset is It is
backward compatible with audio devices with V2.0 or
earlier. Its operation range is up to 10 meters (indoor);
operating power mode is Class 2 (-6-4dBm). This
Information Guide provides more details.
Bluetooth Wireless Technology
Bluetooth is a specification for short-range radio links
between mobile computers, mobile phones, digital
cameras, and other portable devices. The radio operates
on the globally available ISM 'free band', allowing
users to use "Bluetooth" equipment worldwide. The
Bluetooth devices communicate within a maximum of 10
meters; and do not need to be in line of sight.
2
Bluetooth V2.1 compliance.
2.4 GHz
an efficient model with
with iPhone5.
Safety Information
Note: Nearly every electronic device is susceptible to
electromagnetic interference (EMI) if inadequately
shielded, designed, or otherwise configured for
electromagnetic compatibility.
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your device in any facility
where posted notices instructed you to do so. Hospitals
or health care facilities may be using equipment that is
sensitive to external RF energy.
Some devices may interfere with some hearing aids.
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this information.
Use only power supply approved for use with this
particular device. The use of any other type will
invalidate the warranty and can be dangerous.
Never try to disassemble or service the equipment by
yourself.
Keep the handset and accessories out of reach from
children.
There may be restrictions on using Bluetooth technology
in some locations. These could include hospitals, petrol
stations, laboratories, potentially explosive surroundings
and etc.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
3
Contents
Chapter 1: Getting Started
6
Package Contents
BT Handset Overview
7
8
Connecting
Charging
8
9
Turning On or Off the Handset
Chapter 2: Bluetooth Settings
10
Pairing with an iPhone5
Connecting an iPhone5
11
Disconnecting an iPhone5
12
Chapter 3: Operations
13
Making a Call
Receiving a Call
14
Rejecting a Call
14
Ending a Call
14
Adjusting the Volume
14
Muting a Call
15
Call Waiting
15
16
LED Indicator
4 17
Chapter 4: Additional Information
17
Troubleshooting
Care and Maintenance
19
Technical Specifications
20
Compatible Mobile Phones
21
5
Chapter 1: Getting Started
Package Contents
Once you have unpacked your BT handset, make sure
that you have all of these parts. If any component is
missing or broken, please call your dealer.
Handset
Power supply
(7.5V, 1.5A)
Base with
iPhone5 charger
i-500
Product
Information Guide
Information Guide
6
BT Handset Overview
Handset
Base
Volume
controls
LED indicator
Charging cradle
(for BT handset)
Earpiece
Multi-Function
Button (MFB)
Microphone
Charging
pins
Charging cradle
(for iPhone5)
7
Connecting
Connect the plug of the power supply to the power jack of
the base, and then plug the power supply into a standard
AC wall outlet.
To AC wall outlet
Charging
BT Handset & iPhone5
The BT handset uiltin rechargeable Li-Polymer battery.
Before initial operation, fully charge
the BT handset for 6 hours or more.
To charge the BT handset or
iPhone5, simply place it on the
base.
Notes:
The red indicator light
charging properly, and it will be off when the battery is
fully charged.
When the battery is low, the handset beeps twice every
30 seconds and the red indicator flashes three times
every 30 seconds. Charge it as described above, or
else the handset will shut down when battery is v
low.
8
comes with a b
will be on indicating the handset's
ery
Other Mobile Phones
To charge some other mobile
phones, plug the connector in the
USB port on the base, then plug the
other connector in the port of your
mobile phone. For more information
about the compatible model, please
see page 21.
Battery Use and Care
If treated with care, a rechargeable battery has a long
service life. A new battery, or one that has not been used
for a long period of time, could have reduced capacity the
first few times it is used.
Note:
Only qualified service centers are authorized to remove
or replace the battery.
Turning On or Off the Handset
To turn on the handset, press and hold MFB for about
3 seconds, then the handset beeps once and the blue
indicator lights on about 1 second. After that, it flashes
once every second after the handset enters standby
mode.
To turn off the handset, press and hold MFB for about
3 seconds, the red indicator flashes 2 times, and then
power off.
9
Chapter 2: Bluetooth Settings
Pairing with an iPhone5
To use an iPhone5 with you dset, you must
first pair and connect the iPhone5 with the handset.
1
Make sure the handset is power off before starting the
pairing process, and place the Bluetooth handset within
1 meter away from your iPhone5.
Turn on the Bluetooth feature of your iPhone5. Click
2
3
4
Notes:
10
, , and , then the
Settings General Bluetooth OFF
iPhone5 searches for available devices.
Press and hold MFB for about 6 seconds until the
red and blue indicator flash alternately.
When the iPhone5 finds , click to
connect it with the base. The iPhone5 prompts you to
enter the PIN (the default PIN is 0000). Enter it, then
click to confirm. When the iPhone5 is successfully
Pair
connected, displays, and the handset blue
indicator flashes, 1 second on and then 3 seconds off.
Make sure the handset and the iPhone5 are no more
than a meter apart, so they are within operable range.
If the handset is not successfully paired within 2
minutes, after a long beep, it will automatically leave
pairing mode. If you still want to pair, please repeat the
steps of pairing again.
Connected
r Bluetooth han
i-500 Not Paired
Connecting an iPhone5
Although two iPhone5 can be paired with the
handset, only one iPhone5 can be connected to the base
and be engaged in a call at one time.
The BT handset will connect to the last paired iPhone5
automatically when the handset is switched off then on,
and within 10 meters range. Ensure the Bluetooth feature
is enabled on the iPhone5.
If you switch off the Bluetooth feature on the iPhone5 and
then switch it on, you should connect it again. Click
Connected i-500
screen. After the connection is successful,
appears.
to the right side of on the iPhone5
Note:
To pair a new iPhone5, remember to turn the Bluetooth
handset off and then turn it on again.
Bluetooth
Not
Connected
11
Disconnecting an iPhone5
When not using the handset with the iPhone5, they can be
disconnected as follows:
Method 1:
Power off the handset. After that, appears
to the right side of on the iPhone5 screen.
i-500
Method 2:
Switch off the Bluetooth function on the iPhone5.
Note:
Once the handset and the iPhone5 is more than 10
meters apart, they will be disconnected automatically.
Reminder
Some of Instant Messenger, such as Viber,
Skype, Fring, Im+, Nettalk...... may not well
support Bluetooth protocol, please check with
relevant providers and update the software to
use i-500 properly.
Thanks!
12
Not Connected
Chapter 3: Operations
Making a Call
Using the iPhone5
Make calls on the iPhone5 in normal ways.
Voice Dialing (Siri)
Your handset also support voice dialing with some
iPhones. Before using this function, set up "voice-tags" on
your iPhone5.
Press MFB twice on the handset within 0.8 seconds.
When a beep occurs, say the desired number.
Call Switching between the Handset and an iPhone5
Method 1: Using the iPhone5
During a call, you can switch between your BT handset
and your iPhone5.
1
During a call using the iPhone5, click on the display
of the iPhone5, then click . The call
switches to the .
To switch back, click on the iPhone5. The
2
call switches back to the iPhone5.
BT handset
13
Method 2: Using the BT Handset
During a call, press and hold and buttons for about 2
seconds to switch the call between the BT handset and
the iPhone5.
Note:
To use this feature, the BT handset must be paired and
connected to the iPhone5 beforehand. For more details,
please refer to section.Bluetooth Settings
+-
Receiving a Call
To answer a call, after the handset rings, press MFB to
accept the call. You can also answer the call using the
iPhone5.
Rejecting a Call
To reject an incoming call, after the handset rings, press
and hold MFB for about 1 seconds.
Ending a Call
To end a call, press MFB. You can also end the call
using the iPhone5.
14
Adjusting the Volume
During a conversation, press button to increase or press
button to decrease the volume. The handset volume will
-
increase or decrease.
+
Muting a Call
During a conversation, you can temporarily mute the
microphone so that the party on the other end of the line
cannot hear you. You can still hear the other party. This
enables you to converse privately with someone near you.
To mute the microphone, press and hold button for about
2 seconds. During the mute mode a prompt tone occurs
every 1 second.
To unmute the microphone, press and hold button for
about 2 seconds again, a prompt tone occurs.
-
-
Call Waiting
To answer an incoming call during an active call, press
and hold button for about 2 seconds. This put the active
+
call on waiting, and enables you answer the second call.
Press MFB to end the second call and reactivate the
first call.
During the second call, press and hold button for about
2 seconds to return to the first call, meanwhile holds the
second call. At this time press MFB to end the first call.
+
15
LED Indicator
Red LED (Charging indicator)
Handset Status
During the charging
ON (steadily)
LED Status
Fully charged
OFF
Blue LED (Bluetooth indicator)
Handset Status
Power ON
(unconnected)
Standby (connected)
During the pair mode, the red and blue indicator flash
alternately.
16
LED Status
Flashes at 1.5 seconds
interval (0.5 seconds ON, 1
second OFF)
Flashes at 3.5 seconds
interval (0.5 seconds ON, 3
seconds OFF)
Chapter 4: Additional Information
Troubleshooting
Symptom Solution
The handset
doesn't turn on.
The handset is
unable to use with
the iPhone5.
Ensure the battery is properly
charged, fully drained battery
may take a while to charge up.
Contact an authorized service
center.
Ensure the handset and the
iPhone5 is turned on.
Ensure the Bluetooth feature
on the iPhone5 is activated.
Ensure the handset is paired to
the iPhone5, please refer to
pairing procedure.
Ensure both the handset and
iPhone5 is within 10 meters
operating range. There are no
obstructions or interference in
between.
Try to pair the iPhone5 again if
the problem is still not solved.
Symptom Solution
Disable Bluetooth in
the iPhone5 and
then enable it again,
the disconnected
Bluetooth
connection between
the handset and the
iPhone5 cannot be
automatically
resumed.
18
Due to differences in each
iPhone5's software, so it is
normal for some iPhone5
that the Bluetooth
connection cannot be
automatically resumed. If in
this case, please establish
the Bluetooth connection
manually (See P11
"Connecting an iPhone5").
Care and Maintenance
Do not attempt to open the BT handset, only the
authorized maintenance staff should perform the
service. Please check with your local dealer.
Do not expose the handset to liquid, moisture or
humidity. It is not waterproof.
Do not expose the handset to dusty and dirty
environment.
Do not expose the handset to fire. It may result in
explosion.
Do not expose or store the handset in high heat. High
temperature may shorten the life of electronic
components, damage battery, deform plastic parts.
Do not use harsh cleaning solvents or strong detergents
to clean the BT handset. Only use soft cloth to clean the
handset.
Do not throw, drop or knock the handset. Rough
handling can damage the handset.
Do keep the handset in proper storage, dry place, free
from dust and extreme temperatures when not in use.
Do not expose your handset in an environment
temperature above +55 deg C (+131 deg F). If the
handset is operated in cold temperatures, the battery
capacity is reduced. Use your handset in room
temperature for maximum battery capacity.
19
Technical Specifications
Bluetooth Compliance
Frequency Band
Modulation
RF Power
Operating Range
Connection
Security
Power Supply
Charging time
Compatibility
Size (mm)
Ambient temperature
Humidity
Bluetooth Specifications version 2.1
2.4GHz ISM Spectrum; frequency hopping 79
channels
GFSK (Gaussian Frequency Shift Keying)
Class 2, -6-4dBm
Up to 10m (indoor)
Point-to-Point
Security mode 3 (pairing, encryption, authentication)
Base input: 7.5V, 1.5A;
Handset input: Rechargeable Li-Polymer 450mAh
6 hours
Mobile phones supporting Bluetooth 1.1 (and above)
specifications
Base: 172 x 93 x 44; Handset: 140 x 41 x 14
Normal: 15 ~ 35 , Extreme: 0 ~ 40℃℃ ℃℃
0%~90%
? Design and specifications are subject to change without notice.
20
Compatible Mobile Phones
The following model types of mobile phone can be
charged by the base via the USB connector:
1A 1S 2A 2S, 3
，，，
MI:
Galaxy S Galaxy S II Galaxy S III Galaxy S IV
Samsung:
Moto: MB860
Lenovo: LePhone
Note:
Please do not charge the iPhone5 and other mobile
phone at the same time.
// /
21
Loading...