Page 1
G-500
Product
Information Guide
Page 2
This guide contains helpful information
that enables you to enjoy all of the features
of your BT handset.
Page 3
Introduction
Thank you for purchasing the Bluetooth handset. The new
product offers you a unique, wireless experience using
Bluetooth wireless technology. It is a model of efficiency,
offering wireless connections with Galaxy.
this guide before use and kindly note that the contents in
this guide may be updated without notice.
The handset is It is backward
compatible with audio devices with V2.0 or earlier. Its
operation range is up to 10 meters (indoor); operating
power mode is Class 2 (-6-4dBm). This Information Guide
provides more details.
Bluetooth Wireless Technology
Bluetooth is a specification for short-range radio links
between mobile computers, mobile phones, digital
cameras, and other portable devices. The radio operates
on the globally available ISM 'free band', allowing
users to use "Bluetooth" equipment worldwide. The
Bluetooth devices communicate within a maximum of 10
meters; and do not need to be in line of sight.
2
Bluetooth V2.1 compliance.
2.4 GHz
Please read
Page 4
Safety Information
Note: Nearly every electronic device is susceptible to
electromagnetic interference (EMI) if inadequately
shielded, designed, or otherwise configured for
electromagnetic compatibility.
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your device in any facility
where posted notices instructed you to do so. Hospitals
or health care facilities may be using equipment that is
sensitive to external RF energy.
Some devices may interfere with some hearing aids.
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this information.
Use only power supply approved for use with this
particular device. The use of any other type will
invalidate the warranty and can be dangerous.
Never try to disassemble or service the equipment by
yourself.
Keep the handset and accessories out of reach from
children.
There may be restrictions on using Bluetooth technology
in some locations. These could include hospitals, petrol
stations, laboratories, potentially explosive surroundings
and etc.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
3
Page 5
Contents
Chapter 1: Getting Started
6
Package Contents
Bluetooth Handset Overview
7
8
Connecting
Charging
8
9
Turning On or Off the Handset
Chapter 2: Bluetooth Settings
10
Pairing with a Galaxy
Connecting a Galaxy
11
Disconnecting a Galaxy
12
Chapter 3: Operations
13
Making a Call
Receiving a Call
14
Rejecting a Call
14
Ending a Call
14
Adjusting the Volume
14
Muting a Call
15
Call Waiting
15
15
Data Transmission
LED Indicator
16
4 17
Page 6
Chapter 4: Additional Information
17
Troubleshooting
Care and Maintenance
19
Technical Specifications
20
21
Compatible Mobile Phones
5
Page 7
Chapter 1: Getting Started
Package Contents
Once you have unpacked your Bluetooth handset, make
sure that you have all of these parts. If any component is
missing or broken, please call your dealer.
Handset
Base with
Galaxy charger
G-500
Product
Information Guide
Power supply
()5V, 1.5A
Information Guide
6
Page 8
Bluetooth Handset Overview
Handset
Base
Charging cradle
(for BT handset)
Volume
controls
LED indicator
Charging cradle
(for Galaxy)
Earpiece
Multi-Function
Button (MFB)
Microphone
Charging
pins
Knobs
7
Page 9
Connecting
Connect the plug of the power supply to the input power
jack of the base, and then plug the power supply into a
standard AC wall outlet.
To AC wall outlet
Charging
BT Handset & Galaxy
The BT handset comes with a builtin rechargeable Li-Polymer battery.
Before initial operation, fully charge
the BT handset for 6 hours or more.
To charge the BT handset or
Galaxy, simply place it on the base.
Notes:
Adjust the knobs on the base according to the thickness
and height of your Galaxy.
The red indicator light will be on indicating the handset's
charging properly, and it will be off when the battery is
fully charged.
When the battery is low, the handset beeps twice every
30 seconds and the red indicator flashes three times
every 30 seconds. Charge it as described above, or else
the handset will shut down when battery is very low.
8
Page 10
Other Mobile Phones
To charge some other mobile
phones, plug the connector in the
USB port on the base, then plug
the other connector in the port of
your mobile phone. For more
information about the compatible
model, please see page21.
Battery Use and Care
If treated with care, a rechargeable battery has a long
service life. A new battery, or one that has not been used
for a long period of time, could have reduced capacity the
first few times it is used.
Note:
Only qualified service centers are authorized to remove
or replace the battery.
Turning On or Off the Handset
To turn on the handset, press and hold MFB for about
3 seconds, then the handset beeps once and the blue
indicator lights on about 1 second. After that, it flashes
once every second after the handset enters standby
mode.
To turn off the handset, press and hold MFB for about
3 seconds, the red indicator flashes 2 times, and then
power off.
9
Page 11
Chapter 2: Bluetooth Settings
Pairing with a Galaxy
To use a Galaxy with your Bluetooth handset, you must
first pair and connect the Galaxy with the handset.
1
Make sure the handset is power off before starting the
pairing process, and place the Bluetooth handset within
1 meter away from your Galaxy.
On the Galaxy, click button, ,
2
3
4
5
10
, , then click .
network Bluetooth settings Bluetooth
When to the left side of Bluetooth appears as green
color, the Bluetooth on the Galaxy is turned on.
Press and hold MFB for about 6 seconds until the
red and blue indicator flash alternately.
Click , the Galaxy searches for
Search for devices
available devices. When the Galaxy finds , click
Pair with this device
base, then click .
enter the PIN (the default PIN is 0000).
click to confirm.
Pair
When the connection is successful,
phone audio
flashes, 1 second on and then 3 seconds off.
Accept
appears, and the handset blue indicator
Settings Wireless and
G-500
to pair and connect it with the
The Galaxy prompts you to
Enter it, then
Connected to
Page 12
Notes:
Make sure the handset and the Galaxy are no more
than a meter apart, so they are within operable range.
If the handset is not successfully paired within 2
minutes, after a long beep, it will automatically leave
pairing mode. If you still want to pair, please repeat the
steps of pairing again.
Connecting a Galaxy
Although two Galaxies can be paired with the Bluetooth
handset, only one Galaxy can be connected to the base
and be engaged in a call at one time.
The BT handset will connect to the last paired Galaxy
automatically when the handset is switched off then on,
and within 10 meters range. Ensure the Bluetooth feature
is enabled on the Galaxy.
If you switch off the Bluetooth feature on the Galaxy and
then switch it on, you should connect it again. Click
below on the Galaxy screen. After the connection is
G-500
successful, appears.
Connected to phone audio
Note:
To pair a new Galaxy, remember to turn the Bluetooth
handset off first.
Paired
11
Page 13
Disconnecting a Galaxy
When not using the handset with the Galaxy, they can be
disconnected as follows:
Method 1:
Power off the handset. After that, appears instead
of below on the
Connected to phone audio G-500
Galaxy screen.
Method 2:
Switch off the Bluetooth function on the Galaxy.
Note:
Once the handset and the Galaxy is more than 10
meters apart, they will be disconnected automatically.
Reminder
Some of Instant Messenger, such as Viber,
Skype, Fring, Im+, Nettalk...... may not well
support Bluetooth protocol, please check with
relevant providers and update the software to
use G-500 properly.
Thanks!
12
Paired
Page 14
Chapter 3: Operations
Making a Call
Using the Galaxy
Make calls on the Galaxy in normal ways.
Voice Dialing
Your handset also support voice dialing with some Galaxy.
Before using this function, set up "voice-tags" on your
Galaxy.
Press MFB twice on the handset within 0.8 seconds.
When a beep occurs, say the desired number.
Call Switching between the Handset and a Galaxy
Method 1: Using the Galaxy
During a call, you can switch between your BT handset
and your Galaxy.
1
During a cell line call using the , click
display of the Galaxy. The call switches to the Galaxy.
To switch back, click (the bar below
2
is gray) on the Galaxy. The call switches back to the
Bluetooth handset
(the bar below is green) on the
.
Bluetooth handset
Bluetooth
Bluetooth
13
Page 15
Method 2: Using the Bluetooth Handset
During a call, press and hold and buttons for about 2
seconds to switch the call between the Bluetooth handset
and the Galaxy.
Note:
To use this feature, the BT handset must be paired and
connected to the Galaxy beforehand. For more details,
please refer to section.Bluetooth Settings
+-
Receiving a Call
To answer a call, after the handset rings, press MFB to
accept the call. You can also answer the call using the
Galaxy.
Rejecting a Call
To reject an incoming call, after the handset rings, press
and hold MFB for about 1 seconds.
Ending a Call
To end a call, press MFB. You can also end the call
using the Galaxy.
Adjusting the Volume
During a conversation, press button to increase or press
button to decrease the volume. The handset volume will
-
increase or decrease.
14
+
Page 16
Muting a Call
During a conversation, you can temporarily mute the
microphone so that the party on the other end of the line
cannot hear you. You can still hear the other party. This
enables you to converse privately with someone near you.
To mute the microphone, press and hold button for about
2 seconds. During the mute mode a prompt tone occurs
every 1 second.
To unmute the microphone, press and hold button for
about 2 seconds again, a prompt tone occurs.
-
-
Call Waiting
To answer an incoming call during an active call, press
and hold button for about 2 seconds. This put the active
+
call on waiting, and enables you answer the second call.
Press MFB to end the second call and reactivate the
first call.
During the second call, press and hold button for about
2 seconds to return to the first call, meanwhile holds the
second call. At this time press MFB to end the first call.
+
Data transmission
A USB cable is available in the package. To transmit the
data, you can use it or the USB comes with your Galaxy to
connect the PC and the base of G-500.
15
Page 17
LED Indicator
Red LED (Charging indicator)
Handset Status
During the charging
ON (steadily)
LED Status
Fully charged
OFF
Blue LED (Bluetooth indicator)
Handset Status
Power ON
(unconnected)
Standby (connected)
During the pair mode, the red and blue indicator flash
alternately.
16
LED Status
Flashes at 1.5 seconds
interval (0.5 seconds ON, 1
second OFF)
Flashes at 3.5 seconds
interval (0.5 seconds ON, 3
seconds OFF)
Page 18
Chapter 4: Additional Information
Troubleshooting
Symptom Solution
The handset
doesn't turn on.
The handset is
unable to use with
the Galaxy.
Ensure the battery is properly
charged, fully drained battery
may take a while to charge up.
Contact an authorized service
center.
Ensure the handset and the
Galaxy is turned on.
Ensure the Bluetooth feature
on the Galaxy is activated.
Ensure the handset is paired to
the Galaxy, please refer to
pairing procedure.
Ensure both the handset and
is within 10 meters
Galaxy
operating range. There are no
obstructions or interference in
between.
Try to pair the Galaxy again if
the problem is still not solved.
Page 19
Symptom Solution
Disable Bluetooth in
the and then
Galaxy
enable it again, the
disconnected
Bluetooth
connection between
the handset and the
cannot be
Galaxy
automatically
resumed.
18
Due to differences in each
's software, so it is
Galaxy
normal for some that
the Bluetooth connection
cannot be automatically
resumed. If in this case,
please establish the
Bluetooth connection
manually (See P11
"Connecting a ").
Galaxy
Galaxy
Page 20
Care and Maintenance
Do not attempt to open the BT handset, only the
authorized maintenance staff should perform the
service. Please check with your local dealer.
Do not expose the handset to liquid, moisture or
humidity. It is not waterproof.
Do not expose the handset to dusty and dirty
environment.
Do not expose the handset to fire. It may result in
explosion.
Do not expose or store the handset in high heat. High
temperature may shorten the life of electronic
components, damage battery, deform plastic parts.
Do not use harsh cleaning solvents or strong detergents
to clean the BT handset. Only use soft cloth to clean the
handset.
Do not throw, drop or knock the handset. Rough
handling can damage the handset.
Do keep the handset in proper storage, dry place, free
from dust and extreme temperatures when not in use.
Do not expose your handset in an environment
temperature above +55 deg C (+131 deg F). If the
handset is operated in cold temperatures, the battery
capacity is reduced. Use your handset in room
temperature for maximum battery capacity.
19
Page 21
Technical Specifications
Bluetooth Compliance
Frequency Band
Modulation
RF Power
Operating Range
Connection
Security
Power Supply
Charging time
Compatibility
Size (mm)
Ambient temperature
Humidity
Bluetooth Specifications version 2.1
2.4GHz ISM Spectrum; frequency hopping 79
channels
GFSK (Gaussian Frequency Shift Keying)
Class 2, -6-4dBm
Up to 10m (indoor)
Point-to-Point
Security mode 3 (pairing, encryption, authentication)
Base input: ;
5V, 1.5A
Handset input: Rechargeable Li-Polymer 450mAh
6 hours
Mobile phones supporting Bluetooth 1.1 (and above)
specifications
Base: 172 x 93 x 44; Handset: 140 x 41 x 14
Normal: 15 ~ 35 , Extreme: 0 ~ 40℃℃ ℃℃
0%~90%
? Design and specifications are subject to change without notice.
20
Page 22
Compatible Mobile Phones
The following model types of mobile phone can be
charged by the base via the USB connector:
HTC: HD2/ Incredible S/ Desire S etc.
MIONE: M1/M2
Moto: Mb860 etc.
Lenovo: LePhone etc.
Note:
Please do not charge the Galaxy and other mobile
phone at the same time.
21
Page 23
Loading...