ICRealtime PTZN23X4D User Manual
4-inch Analog Speed Dome
User’s Manual
Version 1.0.0
i
Table of Contents
1 FEATURES AND FUNCTIONS ..........................................................................................1
1.1 General Introduction...................................................................................................................................................1
1.2 Features.......................................................................................................................................................................1
1.2.1 On-Screen Menu....................................................................................................................................................1
1.2.2 Proportional Pan and Tilt ......................................................................................................................................1
1.2.3 On-screen Tips.......................................................................................................................................................1
1.2.4 Preset Setup and Call ...........................................................................................................................................1
1.2.5 Auto Scan................................................................................................................................................................1
1.2.6 Auto Tour ................................................................................................................................................................1
1.2.7 Auto Pattern............................................................................................................................................................1
1.2.8 Privacy Masking .....................................................................................................................................................1
1.2.9 Auto Flip ..................................................................................................................................................................1
1.2.10 Self-diagnosis ....................................................................................................................................................2
1.2.11 Day/Night Mode (B/W & Color Mode) ............................................................................................................2
1.2.12 Auto Focus .........................................................................................................................................................2
1.2.13 Backlight Compensation ..................................................................................................................................2
1.2.14 Pan Tilt and Zoom.............................................................................................................................................2
1.2.15 3D Intelligent Location......................................................................................................................................2
1.2.16 Idle Status ..........................................................................................................................................................2
1.2.17 Image Stabilizer/Flip .........................................................................................................................................2
2 MENU .................................................................................................................................3
2.1 Screen Menu Index ..................................................................................................................................................3
2.2 Self-diagnosis System Information ..........................................................................................................................4
2.3 Main Menu ...................................................................................................................................................................4
2.4 Menu Operation ........................................................................................................................................................4
2.4.1 System Information................................................................................................................................................5
2.4.2 Display Setting .......................................................................................................................................................6
2.4.3 Camera Setting ......................................................................................................................................................6
2.4.4 Function Setting ...................................................................................................................................................10
2.4.5 Alarm Setup ..........................................................................................................................................................16
ii
2.5 Dome Abnormal Phenomenon Operation........................................................................................................16
2.5.1 Restore to Factory Default Setup ......................................................................................................................16
2.5.2 PTZ Movement is not smooth ............................................................................................................................16
3 CABLE CONNECTION .....................................................................................................17
3.1 System Layout ........................................................................................................................................................17
3.1.1 System Connection .............................................................................................................................................17
3.1.2 Alarm Connection ................................................................................................................................................18
4 FAQ...................................................................................................................................19
4.1 Daily Maintenance..................................................................................................................................................19
4.2 Problems and Solutions.......................................................................................................................................19
5 APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION .......................................20
6 APPENDIX 2 TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...........................21
iii
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this speed dome features and functions, as well as a detailed menu tree.
Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!
iv
Important Safeguards and Warnings
1．Electrical safety
z All installation and operation here should conform to your local electrical safety codes.
z The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1.
z We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
z We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
z No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
z Please use the original packing material (or the material of the same quality) when you ship it back to
the manufacturer.
3．Installation
z Do not apply power to the product before completing installation.
z Please install the proper power cut-off device during the installation connection.
z Do not put object on the product.
4．Environment
z This series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
z Please keep it away from the electromagnetic radiation object and environment.
z Please keep the sound ventilation.
z Do not allow the water and other liquid falling into the device.
z Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
z Thunder-proof device is recommended to be adopted to better prevent thunder.
z The grounding holes of the product are recommended to be grounded to further enhance the reliability
of the camera.
5. Daily Maintenance
z Current series product has no power button. Please unplug all corresponding power cables before your
begin installation or daily maintenance work.
z Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a
long time.
z Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the
device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
z Do not use the volatility solvent such as the benzene or thinner, or detergent with strong abradibility. It
may result in lens damage or it may adversely affect the device performance.
v
z If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
z 6. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in the package:
Contact you local retailer ASAP if something is missing in your package.
1
1 Features and Functions
1.1 General Introduction
The 4-inch analog intelligent speed dome is a product of general high level of integration and intelligence.
Its structure adopts the new design and is easy to install. It has no effect on the monitor environment. It
is featuring clear video, intelligent and etc.
Besides the features of the general series product, it adds some new functions. .The PTZ rotation speed
can automatically adjusts according to lens zoom speed. It supports various languages, real-time clock
function and protocol auto recognition. It supports 360° continuously pan, 92°tilt and 180° auto flip. It can
realize no blind spot monitor.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom.
This series speed dome continually decreases or increases pan and tilt speeds in proportion to depth of
zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms speed
is decreasing, the camera moving speed becomes fast.
1.2.3 On-screen Tips
Via menu, here you can view:
z Call preset and preset ID, speed dome title when calling touring.
z Dome system temperature. (Optional. You can disable this function)
z Dome address. (Optional. You can disable this function)
1.2.4 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.
1.2.5 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and
scan speed.
1.2.6 Auto Tour
Add presets into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these presets.
1.2.7 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.8 Privacy Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.9 Auto Flip
2
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180
degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the
dome.
1.2.10 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
z Tilt and vertical engine check
z Camera diagnosis
1.2.11 Day/Night Mode (B/W & Color Mode)
Auto/color/B&W switches in low illumination. There are several modes such as auto/manual/schedule.
This function needs the speed dome driver (camera) supported.
1.2.12 Auto Focus
Support auto focus function.
1.2.13 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.14 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
In this period auto focus and auto iris can still get vivid image.
1.2.15 3D Intelligent Location
Support 3D intelligent positioning function, speed dome can auto track to the specified zone. .
1.2.16 Idle Status
When there is no available order for specified period, the speed dome can implement previously set idle
operation.
1.2.17 Image Stabilizer/Flip
You can enable image stabilizer function and flip in the menu.
When there is vibration, this IS function can guarantee video stability and when flip, you can view video
more clearly.
This function needs speed dome driver (camera) supported.
3
2 Menu
2.1 Screen Menu Index
Note:
ERR means current setup is invalid.
… means there is submenu.
SYSTEM
INFORMATION
…
ADDR INFORMATION…
SET NORTH
LANGUAGE ：ENGLISH
FACTORY DEFAULT
RESTART
BACK
EXIT
PRESET TITLE
:
ON
(ON/OFF)
AZIMUTH DISP : ON (ON/OFF)
POSITION : OFF (ON/OFF)
ZOOM DISP : OFF (ON/OFF)
INSIDE TEMP : ℃ (℃/F/OFF)
TITILE DISPLAY :OFF
BACK
EXIT
DISPLAY SET
TING
SYSTEM
INFORMATION
CAMERA SE
TTING
FUNCTION SET
TING
EXIT
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETUP
ZOOM SPEED
APERTURE
APERTURE CNT LEVEL
NEXT PAGE
BACK
EXIT
PRESET
AUTO PAN
AUTO SCAN
TOUR
PATTERN
IDLE MOTION
NEXT PAGE
BACK
EXIT
ALARM SET
TING
A
LARM NO
ACTION
SN
CONTACT
RELAY OUT
RESET DELAY
SAVE
BACK
EXIT
Loading...