HD Laser Speed Dome User’s Manual
Version 1.0.0
i
Table of Contents
1 FEATURES AND FUNCTIONS........................................................................................... 1
1.1 General Introduction ................................................................................................................................................... 1
1.2 Features ....................................................................................................................................................................... 1
1.2.1 On-Screen Menu .................................................................................................................................................... 1
1.2.2 Zoom Speed Limit .................................................................................................................................................. 1
1.2.3 OSD ......................................................................................................................................................................... 1
1.2.4 Preset Setup and Call ........................................................................................................................................... 1
1.2.5 Auto Scan ................................................................................................................................................................ 1
1.2.6 Auto Touring ........................................................................................................................................................... 1
1.2.7 Auto Pattern ............................................................................................................................................................ 1
1.2.8 Privacy Masking ..................................................................................................................................................... 1
1.2.9 Auto Flip .................................................................................................................................................................. 1
1.2.10 Self-diagnosis .................................................................................................................................................... 1
1.2.11 Day/Night Mode (B/W & Color Mode) ............................................................................................................ 2
1.2.12 Auto Focus ......................................................................................................................................................... 2
1.2.13 Backlight Compensation .................................................................................................................................. 2
1.2.14 Pan Tilt and Zoom ............................................................................................................................................. 2
1.2.15 3D Intelligent Positioning ................................................................................................................................. 2
1.2.16 Idle Status .......................................................................................................................................................... 2
1.2.17 Image Stabilizer/Flip ......................................................................................................................................... 2
2 QUICK CONFIGURATION TOOL ....................................................................................... 3
2.1 Overview ...................................................................................................................................................................... 3
2.2 Operation ..................................................................................................................................................................... 3
3 WEB OPERATION .............................................................................................................. 6
3.1 Network Connection ................................................................................................................................................... 6
3.2 Login and Logout ........................................................................................................................................................ 6
ii
4 MENU ................................................................................................................................. 9
4.1 Screen Menu Index .................................................................................................................................................. 9
4.2 Self-diagnosis System Information ........................................................................................................................ 10
4.3 Main Menu ................................................................................................................................................................. 10
4.4 Menu Operation ...................................................................................................................................................... 11
4.4.1 System Information .............................................................................................................................................. 11
4.4.2 Display Setting ..................................................................................................................................................... 12
4.4.3 Camera Setting .................................................................................................................................................... 12
4.4.4 Function Setting ................................................................................................................................................... 18
4.4.5 Wiper Setting ........................................................................................................................................................ 26
4.4.6 Laser Setting......................................................................................................................................................... 27
4.5 Abnormity Handling ............................................................................................................................................... 27
5 CABLE CONNECTION ..................................................................................................... 28
5.1 Combination Cable Connection ............................................................................................................................ 28
5.2 System Layout ........................................................................................................................................................ 29
5.2.1 System Connection ............................................................................................................................................. 29
5.2.2 Alarm Connection ................................................................................................................................................ 29
6 FAQ ................................................................................................................................... 30
6.1 Daily Maintenance .................................................................................................................................................. 30
6.2 Problems and Solutions ....................................................................................................................................... 30
7 APPENDIX Ⅰ LIGHTNING PROOF AND SURGE PROTECTION ..................................... 31
8 APPENDIX 2 TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ........................... 32
iii
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this speed dome features and functions, as well as a detailed menu tree.
Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!
iv
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
Please use the original packing material (or the material of the same quality) when you ship it back to
the manufacturer.
3．Installation
Do not apply power to the product before completing installation.
Do not put object on the product.
4. Qualification Requirement
The device has to be installed and repaired by professional licensed technician and installation
personnel.
5. Dismantling
Don’t remove screws or protection cover; there are no parts inside the SD for users to repair by
themselves.
6．Environment
This series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the device. This series product complies with the IP66
standard specified in the Degrees of Protection Provided by Enclosure.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Usually we recommend lightning-proof device to prevent thunder strike.
The GND port of the product shall be grounded to further enhance the reliability of the device.
7. Daily Maintenance
Current series product has no power button. Please unplug all corresponding power cables before your
begin installation or daily maintenance work.
Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a
long time.
v
Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the
device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
Do not use the volatility solvent such as the benzene or thinner, or detergent with strong abradibility. It
may result in lens damage or it may adversely affect the device performance.
If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
8. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in the package:
Contact you local retailer ASAP if something is missing in your package.
1
1 Features and Functions
1.1 General Introduction
This series laser HD speed dome product is an integrated high intelligent speed dome. It adopts new
configuration design and is easy for the project construction. This is a digital and intelligent product of vivid
video. The installation is convenient.
Comparing with the previous series product, this series laser HD speed dome has added some new features.
It supports intelligent analysis function, and the PTZ rotation speed can automatically adjust according to the
zoom rate of the lens. It supports various languages, real-time clock function and protocol auto recognition.
It supports 360° continuously pan, 110°tilt(-20°-90°) and 180° auto flip. It can realize no blind spot monitor.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 Zoom Speed Limit
The laser HD intelligent speed Dome adopts auto match technology between focal length and rotation speed.
The pan and tilt speed of the speed dome change according to the zoom rate of the device. The movement
speed becomes slower when the zoom speed increases, and the movement speed becomes higher when
the zoom speed decreases.
1.2.3 OSD
It can display the called preset and preset ID, speed dome title, speed dome system temperature, speed
dome location coordinates when touring via menu setting.
1.2.4 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.
1.2.5 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan
speed.
1.2.6 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses.
1.2.7 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.8 Privacy Masking
Privacy masking is a user-defined, four-sided area that cannot be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.9 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees
and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.10 Self-diagnosis
2
There is a self diagnosis procedure when dome boots up.
Tilt and vertical engine check
Camera diagnostics (mainly zoom function diagnosis)
Display dome information.
1.2.11 Day/Night Mode (B/W & Color Mode)
Auto/manual switches in low illumination. There are several modes such as photoresistor, auto, manual and
etc. This function needs the speed dome driver (camera) supported.
1.2.12 Auto Focus
Support camera auto focus function.
1.2.13 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.14 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
You can still get vivid image even you set auto focus and auto iris during this period.
1.2.15 3D Intelligent Positioning
Support 3D intelligent positioning function. The speed dome can auto track to the specified zone.
1.2.16 Idle Status
When there is no available order for specified duration, you can use menu to set dome idle status.
1.2.17 Image Stabilizer/Flip
You can enable image stabilizer function and flip in the menu.
When there is vibration, this IS function can guarantee video stability and when flip, you can view video
more clearly.
This function needs speed dome driver (camera) supported.
3
2 Quick Configuration Tool
2.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it
to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
2.2 Operation
Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1.
In the device list interface, you can view device IP address, port number, subnet mask, default gateway,
MAC address and etc.
Figure 2-1
Select one IP address and then right click mouse, you can see an interface is shown as in Figure 2-2.
Note:
You can set the IP address, subnet mask and gateway for the network camera and PC. Please note network
camera IP address and PC IP address shall be in the same network segment if there is no router. Network
camera default IP address is 192.168.1.108. If there is a router, please set the corresponding gateway and
subnet mask.
The factory default user name is admin and password is admin. For security reasons, please modify your
password after you first login.
For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.
4
Figure 2-2
Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 2-3.
Figure 2-3
If you want to modify the device IP address without logging in the device web interface, you can go to the
configuration tool main interface to set.
In the configuration tool search interface (Figure 2-1), please select a device IP address and then double
click it to open the login interface. Or you can select an IP address and then click the Login button to go to
the login interface. See Figure 2-4.
In Figure 2-4, you can view device IP address, user name, password and port. Please modify the
corresponding information to login.
Please note the port information here shall be identical with the port value you set in TCP port in Web
Network interface. Otherwise, you can not login the device.
If you are using device background upgrade port 3800 to login, other setups are all invalid.
5
Figure 2-4
After you logged in, the configuration tool main interface is shown as below. See Figure 2-5.
Figure 2-5
For detailed information and operation instruction of the quick configuration tool, please refer to the
Quick Configuration Tool User’s Manual included in the resources CD.
6
Input your IP
address here
3 Web Operation
This series speed dome product supports the Web access and management via PC.
Web includes several modules: live view, PTZ, setup, alarm, logout and etc.
Speed dome factory default setup:
IP address: 192.168.1.108.
User name: admin
Password: admin
3.1 Network Connection
Please follow the steps listed below for network connection.
Make sure the speed dome has connected to the network properly.
Speed dome IP address and PC IP address shall be in the same network segment. Speed dome default
IP address is 192.168.1.108. If there is router, please set the corresponding gateway and subnet mask.
Use order ping ***. ***. ***. *** (* speed dome address) to check connection is OK or not.
3.2 Login and Logout
Open IE and input speed dome address in the address bar.
For example, if your speed dome IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
bar. See Figure 3-1.
Figure 3-1
System pops up warning information to ask you whether install control webrec.cab or not. Please click OK
button, system can automatically install the control. When system is upgrading, it can overwrite the previous
Web too.
If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the
control download. Or you can lower the IE security level. See Figure 3-2.
Loading...