How it Works
IC Realtime
Loading...
ICIPMP1808IR
User Manual
38 pgs630.2 Kb0

IC Realtime ICIPMP1808IR User Manual

Download
Page 1
IR Network Intelligent Speed Dome User’s Manual
Version 1.0.0
Page 2
Table of Contents
1 FEATURES AND FUNCTIONS ..........................................................................................1
1.1 General Introduction...................................................................................................................................................1
1.2 Features.......................................................................................................................................................................1
2 QUICK CONFIGURATION TOOL .......................................................................................3
2.1 Overview ......................................................................................................................................................................3
2.2 Operation .....................................................................................................................................................................3
3 WEB OPERATION..............................................................................................................6
3.1 Network Connection...................................................................................................................................................6
i
Page 3
3.2 Login and Logout........................................................................................................................................................6
4 MENU .................................................................................................................................9
4.1 Screen Menu Index ..................................................................................................................................................9
4.2 Self-diagnosis System Information ........................................................................................................................10
4.3 Main Menu .................................................................................................................................................................10
4.4 Menu Operation ......................................................................................................................................................10
4.5 Dome Abnormal Phenomenon Operation........................................................................................................26
5 CABLE CONNECTION .....................................................................................................27
5.1 Combination Cable Connection............................................................................................................................27
5.2 System Layout ........................................................................................................................................................27
6 FAQ...................................................................................................................................29
6.1 Daily Maintenance..................................................................................................................................................29
6.2 Problems and Solutions.......................................................................................................................................29
7 APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION .......................................30
8 APPENDIX 2 TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...........................31
ii
Page 4
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this speed dome features and functions, as well as a detailed menu tree.
Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!
iii
Page 5
Important Safeguards and Warnings
1．Electrical safety
z All installation and operation here should conform to your local electrical safety codes.
z We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
z We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
z No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
z Please use the original packing material (or the material of the same quality) when you ship it back to
the manufacturer.
3．Installation
z Do not apply power to the product before completing installation.
z Do not put object on the product.
4．Environment
z This series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
z Please keep it away from the electromagnetic radiation object and environment.
z Please keep the sound ventilation.
z Do not allow the water and other liquid falling into the device. This series product complies with the IP66
standard specified in the Degrees of Protection Provided by Enclosure.
z Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
z Usually we recommend thunder-proof device to prevent thunder strike.
z The GND port of the product shall be grounded to further enhance the reliability of the device.
5. Daily Maintenance
z Current series product has no power button. Please unplug all corresponding power cables before your
begin installation or daily maintenance work.
z Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a
long time.
z Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the
device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
z Do not use the volatility solvent such as the benzene or thinner, or detergent with strong abradibility. It
may result in lens damage or it may adversely affect the device performance.
z If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
iv
Page 6
6. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in the package:
Contact you local retailer ASAP if something is missing in your package.
v
Page 7
1 Features and Functions
1.1 General Introduction
This series IR network intelligent speed dome product is an integrated high intelligent speed dome. It adopts
new configuration design and is easy for the project construction. This is a digital and intelligent product of
vivid video. The installation is convenient.
Comparing with the previous series product, this series IR network intelligent speed dome has added some
new features. It supports 120M IR night vision, intelligent analytics, and the PTZ rotation speed can
automatically adjust according to the zoom rate of the lens. It supports various languages, real-time clock
function and protocol auto recognition. It supports 360° continuously pan, 100°tilt(-10°-90°) and 180° auto
flip. It can realize no blind spot monitor.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom.
The IR high definition speed dome continually decreases or increases pan and tilt speeds in proportion to
depth of zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms
speed is decreasing, the camera moving speed becomes fast.
1.2.3 On-screen Tips
Here you can view:
z Dome title and system version (Software and hardware)
z Dome system temperature. (Optional. You can disable this function)
z Dome pan/tilt coordinates, preset ID.
1.2.4 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.
1.2.5 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan
speed.
1.2.6 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses.
1.2.7 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.8 3D Privacy Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1
Page 8
1.2.9 Defog
Customized defog setup in case the fog environment may affect the video quality. It is to enhance video
resolution.
1.2.10 3D noise reduction
Support 3D noise reduction setup to reduce the camera noise under the low illumination environment. It is to
enhance video quality.
1.2.11 Action on Alarm
This series IR high definition speed dome has 7 alarm inputs (normal open or normal close) and 2 alarm
outputs (normal open). Alarms can be individually programmed to associated activation action(s) when
received. .
1.2.12 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees
and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.13 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
z Tilt and vertical engine check
z Camera diagnostics (mainly zoom function diagnosis)
z Display dome information.
1.2.14 Day/Night Mode (B/W & Color Mode)
Auto/manual switches in low illumination. There are several modes such as photoresistor, auto, manual and
etc. This function needs the speed dome driver (camera) supported.
1.2.15 Auto Focus
Support camera auto focus function.
1.2.16 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.17 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
You can still get vivid image even you set auto focus and auto iris during this period.
1.2.18 FD 3D Intelligent Positioning
Support 3D intelligent positioning function. The speed dome can auto track to the specified zone.
1.2.19 Idle Status
When there is no available order for specified duration, you can use menu to set dome idle status.
1.2.20 Image Stabilizer/Flip
You can enable image stabilizer function and flip in the menu.
When there is vibration, this IS function can guarantee video stability and when flip, you can view video
more clearly.
This function needs speed dome driver (camera) supported.
2
Page 9
2 Quick Configuration Tool
2.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it
to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
2.2 Operation
Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1.
In the device list interface, you can view device IP address, port number, subnet mask, default gateway,
MAC address and etc.
Figure 2-1
Select one IP address and then right click mouse, you can see an interface is shown as in Figure 2-2.
Note:
You can set the IP address, subnet mask and gateway for the network camera and PC. Please note network
camera IP address and PC IP address shall be in the same network segment if there is no router. Network
camera default IP address is 192.168.1.108. If there is a router, please set the corresponding gateway and
subnet mask.
The factory default user name is admin and password is admin. For security reasons, please modify your
password after you first login.
For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.
3
Page 10
Figure 2-2
Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 2-3.
Figure 2-3
If you want to modify the device IP address without logging in the device web interface, you can go to the
configuration tool main interface to set.
In the configuration tool search interface (Figure 2-1), please select a device IP address and then double
click it to open the login interface. Or you can select an IP address and then click the Login button to go to
the login interface. See Figure 2-4.
In Figure 2-4, you can view device IP address, user name, password and port. Please modify the
corresponding information to login.
Please note the port information here shall be identical with the port value you set in TCP port in Web
Network interface. Otherwise, you can not login the device.
If you are using device background upgrade port 3800 to login, other setups are all invalid.
4
Page 11
Figure 2-4
After you logged in, the configuration tool main interface is shown as below. See Figure 2-5.
Figure 2-5
For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.
5
Page 12
3 Web Operation
This series speed dome product supports the Web access and management via PC.
Web includes several modules: live view, PTZ, setup, alarm, logout and etc.
Speed dome factory default setup:
z IP address: 192.168.1.108.
z User name: admin
z Password: admin
3.1 Network Connection
Please follow the steps listed below for network connection.
z Make sure the speed dome has connected to the network properly.
z Speed dome IP address and PC IP address shall be in the same network segment. Speed dome default
IP address is 192.168.1.108. If there is router, please set the corresponding gateway and subnet mask.
z Use order ping ***.***.***.***(* speed dome address) to check connection is OK or not.
3.2 Login and Logout
Open IE and input speed dome address in the address bar.
For example, if your speed dome IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
bar. See Figure 3-1.
Input your IP
address here
Figure 3-1
System pops up warning information to ask you whether install control webrec.cab or not. Please click OK
button, system can automatically install the control. When system is upgrading, it can overwrite the previous
Web too.
If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the
control download. Or you can lower the IE security level. See Figure 3-2.
6
Page 13
Figure 3-2
After installation, the interface is shown as below. See Figure 3-3.
Please input your user name and password.
Default factory name is admin and password is admin.
Select the network connection type.
Note: For security reasons, please modify your password after you first login.
Figure 3-3
After you logged in, you can see the main window. See Figure 3-4.
7
Page 14
Figure 3-4
Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
8
Page 15
4 Menu
PRESET
DISPLAY SET
TING
SYSTEM
SETTING
CAMERA SE
TTING
FUNCTION SET
TING
EXIT
WB SETTING
PRESET
IR LIGHT
SET
TING
IR SEN
SITIVITY
SYSTEM
INFORMATION
4.1 Screen Menu Index
Note:
ERR means current setup is invalid; you need to restores speed dome factory default setup.
Slight difference may be found due to different series.
The above diagram illustrates the overall structure of the speed dome setup menu.
ADDR INFORMATION… SET NORTH LANGUAGE FACTORY DEFAULT RESTART BACK EXIT
AZIMUTH DISP TIME DISP POSITION ZOOM DISP INSIDE TEMP TITILE DISPLAY BACK EXIT
EXPOSURE SETTING DAY/NIGHT SETTING FOCUS SETTING IMAGE ADJUST ZOOM SPEED APERTURE APERTURE RESTRAIN DEFOG SETTING NEXT PAGE BACK EXIT
AUTO PAN AUTO SCAN TOUR PATTERN IDLE MOTION AUTO RUN NEXT PAGE BACK EXIT
IR LIGHT CTRL: NEAR LIGHT: FAR LIGHT: IR LIGHT COMP: BACK EXIT
:
…
9
Page 16
Note:
z ERR means current setup is invalid.
z Please make sure all the cable connections are right.
4.2 Self-diagnosis System Information
ADDR ：001-S BAUD RATE ：9600 PARITY ：NONE SOFTWARE ：V1.02.0.R BACK EXIT
After installation, please connect speed dome to power. The system goes on a self-diagnosis, and then it
pops up the above interface to show the system information.
The above interface disappears after speed dome received the first command (or the display time lasts for
20 seconds.)
z ADDR: Here you can view dome address information. For example, 001-S, 1 is the address number, –S
is software address mode.
z Baud rate: Dome communication baud rate.
z Parity: Communication parity bit format.
z Software: Dome PTZ software version.
When you are using the control keyboard or the matrix host to control the device, please make sure the control parameter of the keyboard or the matrix host is the same with the speed dome OSD (including address, baud rate, parity). Please make sure the cable connection is OK.
4.3 Main Menu
You can open the IP dome menu via control keyboard, matrix, or speed dome control terminal.
z SYSTEM SETTING：Display speed dome system information, address information. Here you can set
north direction, language, factory default setup, reboot and so on.
z DISPLAY SETTING: Display dome preset title, azimuth display, time, direction, dome internal
temperature, title information, zoom information and etc.
z CAMERA SETTINGS：Set dome white balance, camera parameter, day/night setup and etc.
z FUNCTION SETTING: Set preset, pan, auto scan, auto tour, pattern, idle function, time task and
privacy mask function.
z IR LIGHT SETTING: Set dome IR sensitivity, IR control principle, medium and far light bright, far light
bright, IR light compensation and etc.
z EXIT: Log out the system menu.
SYSTEM SETTING DISPLAY SETTING CAMERA SETTING FUNCTION SETTING IR LIGHT SETTING EXIT
4.4 Menu Operation
10
Page 17
In the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome
terminal menu to configure the system menu. Before setup, please move the cursor to the current item you
want to configure.
z In main menu, please click confirm button to go to the sub menu or use left/right key to configure setup.
z Use up/down button to select back option and then click confirm button to go back to the previous menu.
z Use up/down button to select exit option and then click confirm button to log out system menu.
z All setup here will not lose when encounter power failure.
4.4.1 System Information
Move the cursor to SYSTEM SETTING and then click confirm button, you can go to the third submenu.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After completed
setup, please click save button to save current setup.
z SYSTEM INFORMATION: Move the cursor to SYSTEM INFORMATION and then click confirm button
to go to the third submenu.
z ADDR INFORMATION: Move the cursor to SITE INFORMATION and then click confirm button to go to
the third submenu.
z SYSTEM TIME SETTING: Move the cursor to SYSTEM TIME SETTING and then click confirm button
to go to the third submenu.
z SET NORTH DIRECTION: Set dome benchmark direction so that you can know the angel between the
benchmark and then current location. Please move the cursor to the option and then click confirm
button until you see O.K. Now you have set north direction.
z LANGUAGE: The dome menu language. There are several languages for you to select. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z FACTORY DEFAULT: Restore dome factory default setup. Please move the cursor to the option and
then click confirm button until you see O.K. Now you can see the IP dome begin rebooting to restore
factory default setup.
z RESTART: Reboot the speed dome.
z BACK: Go back to the previous menu.
z EXIT: Log out system menu.
SYSTEM INFORMATION ADDR INFORMATION SET NORTH LANGUAGE FACTORY DEFAULT RESTART BACK EXIT
4.4.1.1 System information
ADDR ： 001-S BAUD RATE ：9600 PARITY ：NONE SOFTWARE ：V1.02.0.RHNDDC BACK EXIT
Move the cursor to SYSTEM INFORMATION and then click confirm button, you can see the above interface. Here you can view dome basic information.
4.4.1.2 Address Information
ADDR TYPE ： SOFT ADDR-SOFT ：001 BACK EXIT
11
Page 18
Move the cursor to SITE INFORMATION and then click confirm button.
z ADDR TYPE: System supports software address only.
z ADDR-SOFT: It is to display speed dome software address. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set. The value ranges from 1 to 255.
z BACK: Go back to the previous menu.
z EXIT: Log out system menu.
4.4.2 Display Setting Before the operation, please make sure you purchased camera supports zoom function.
Move the cursor to DISPLAY SETTING and then click confirm button, you can go to the third submenu.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After completed
setup, please click save button to save current setup.
z PRESET: Display dome preset title or not. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set. You can go to Function Setup->Preset section to set corresponding
preset value and preset title.
z AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set
z TIME DISP: Display dome system time or not. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z POSITION: Display the angel between the benchmark and then current location. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z ZOOM DISP: Display speed dome optical zoom speed or not.
z INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃/F/Off.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z TITLE DISPLAY: Here you can set to display speed dome position information and etc. You can use the
speed dome control terminal to set the detailed title information. Please use the left/right button to set.
z BACK: Go back to the previous menu.
z EXIT: Log out system menu.
PRESET ： AZIMUTH DISP ： TIME DISP ： POSITION ： ZOOM DISP ： INSIDE TEMP ： TITLE DISP ： BACK EXIT
4.4.3 Camera Setting Before the operation, please make sure your camera supports the corresponding function.
WB SETTING EXPOSURE SETTING DAY/NIGHT SETTING FOCUS SETUP
IMAGE ADJUST
ZOOM SPEED APERTURE : APERTURE RESTRAIN: 8 DEFOG SETTING NEXT PAGE BACK EXIT
12
Page 19
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
z WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go
to the third menu.
z EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to
the third menu.
z DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button, you
can go to the third menu. There are three options: auto/manual/off. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set. Please make sure your product supports this
function.
z FOCUS SETUP: It is to set the camera focus mode, focus limit and etc. Please move the light to
highlight current item and then click the OK button to go to the next level menu.
z IMAGE ADJUSTMENT: It is to set the camera hue, saturation, color control, gamma and etc. There is
the third menu. Please move the light to highlight current item and then click the OK button to go to the
next level menu.
z ZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z APERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z APERTURE RESTRAIN: System can auto reduce the aperture to lower the video noise when it is in low
illumination environment. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
z DEFOG: It is to set camera defog mode and intensity. It can enhance the camera video quality under
the fog environment. There is the third menu. Please move the light to highlight current item and then
click the OK button to go to the next level menu.
z NEXT PAGE: It includes the following options: DIGITAL ZOOM, PICTURE FLIP, FREEZE FUNCTION,
STABLE, CAMERA FACTORY DEFAULT SETUP, and CAMERA RESTART. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
z WHITE BALANCE MODE: Set white balance adjustment mode. There are several modes such as auto,
auto trace white balance, indoor, outdoor, and manual and etc. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z R GAIN: Before you set R GAIN option, please note the mode shall not be auto. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z B GAIN: Before you set B GAIN option, please note the mode shall not be auto. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
WB MODE ： AUTO R GAIN ： 220 B GAIN ： 150 BACK EXIT
13
Page 20
4.4.3.2 Exposure Setting
AE MODE ： AUTO GAIN SETTING ： 02 SHUTTER ：1/50 IRIS SETTING ：11 EXPOSURE COMP ： 08 SLOW AE ： 01 SLOW SHUTTER ：ON NEXT PAGE BACK EXIT
AGC GAIN LIMIT ：03 HIGH GAIN ：ON SLOW SHUTTER LIMIT ：1/25 NOISE REDUCTION ：03 3D NOISE REDUCTION BLC ：OFF HIGH LIGHT REDUCE ：OFF WDR SETTING
AE RECOVERY ：15M
BACK EXIT
z AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris priority)/TV
(shutter priority). Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.
o Auto: The gain, iris and shutter is under auto setup mode o Manual: You need to set gain, iris and shutter manually. o AV: You can set iris manually. Gain and shutter is under auto setup mode. o TV: You can set shutter manually. Gain and iris is under auto setup mode.
z GAIN SETTING: It is to set camera gain. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z SHUTTER: It is to set camera shutter speed. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z IRIS SETTING: It is to set camera iris value. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z EXPOSURE COM: It is to set camera exposure compensation. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z SLOW AE: In the strong light environment, you can lower the camera exposure speed to capture the
image and enhance the definition. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure time to
capture the image and enhance the definition. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z NEXT PAGE: It includes: GAIN MAX LIMIT, SLOW SHUTTER LIMIT, NOISE REDUCTION, 3D NOISE
REDUCTION, BLC, WDR, AE resume time, BACK, and EXIT. Move the cursor to the item and then
click the left/right button to set.
o AUTO GAIN LIMIT: It is to set auto gain threshold. Please click the left/right button to set. o HIGH GAIN: It is to set high gain threshold. Please click the left/right button to set. o SLOW SHUTTER LOW LIMIT: Please click the left/right button to set. o NOISE REDUCTION: There may noise when the camera is monitoring the low illumination
environments. You can use the digital filter to process the noise to guarantee the clear video.
o 3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. There is the
fourth menu. Please move the light to highlight current item and then click the OK button to
go to the next level menu.
o BLC: It is an abbreviation for back light compensation. System can compensate the object in
the dark light to achieve a clear video. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
14
Page 21
o HIGH LIGHT REDUCE: It is to reduce the abruptly strong video on the video in case it
affects the video quality. Please click the left/right button to set.
o EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects
the video quality. Please click the left/right button to set.
o WDR SETTING: It is an abbreviation for wide dynamic region. Please make sure your
camera supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. There is the fourth menu.
Please move the light to highlight current item and then click the OK button to go to the next
level menu.
o AE RECOVERY: Manually click the “+” and “-“button on the PTZ interface, system cam
resume previous exposure value after specified time (The exposure value does not resume
if this function is off.).
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.3 3D Noise Reduction
Move the cursor to 3D NOISE REUDCTION and then click confirm button, you can go to the submenu.
CONTROL MODE ：AUTO 3D NOISE MODE ： HIGH
3D NOISE TNF ：OFF
3D NOISE SNF ：OFF BACK EXIT
z CONTROL MODE: It is to set 3D noise reduction mode. It includes: off/manual/auto and etc. Please
click the left/right button to set.
z 3D NOISE MODE: When the noise reduction mode is auto, you can set intensity. It includes:
low/high/default. Please click the left/right button to set.
z 3D NOISE TNF: This function is valid when you set the noise reduction mode as manual. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
z 3D NOISE SNF: This function is valid when you set the noise reduction mode as manual. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.4 WDR
Move the cursor to WDR and then click confirm button, you can go to the submenu.
WDR MODE ：OFF DETECTION SENS ：LOW SHADOW CORRECTION ：MID BACK EXIT
z WDR MODE: It is to enable or disable WDR function. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
z
DETECTION SENSISIVITY: It is to set WDR detection sensitivity. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
15
Page 22
z SHADOW CORRECTION: It is to set video shadow correction level. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.5 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.
DAY/NIGHT ：AUTO DAY TIME ：07H 00M NIGHT TIME ：19H 00M THRESHOD ： 4 SAVE BACK EXIT
z DAY/NIGHT: It is to set camera day/night switch mode. It includes:
Photosensor/auto/schedule/color/B&W. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
z DAY TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY TIME
item and then click confirm button to go to setup. Please user up/down button to set the value. After
completed setup, please click confirm button to exit and move the cursor to Save button to save current
setup.
z NIGHT TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY
TIME item and then click confirm button to go to setup. Please user up/down button to set the value.
After completed setup, please click confirm button to exit and move the cursor to save button to save
current setup.
z THRESHOLD: The speed dome can switch the day/night mode when it reached the threshold you set
here.
z SAVE: This button is for DAY TIME and NIGHT TIME setup. After you set the day time (or night time),
you need to move the cursor here and then click confirm button to save current time setup. For other
setups, you do not need to use this button.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.6 Focus Setup
z FOCUS MODE: It is to set the camera focus mode. It includes several modes such as auto, manual,
semiautomatic.
z FOCUS LIMIT: It is to set the camera focus limit. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
z AF SENSITIVITY: It is to set the camera focus sensitivity. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z IR CORRECTION: It is to set the camera IR light focus correction. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
FOCUS MODE ：UTO FOCUS LIMIT ：7H 00M
AF SENSITIVITY: ：FAULT IR CORRECTION ：AUTO
BACK EXIT
16
Page 23
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.7 Image Adjust
Move the cursor to IMAGE ADJUST and then click confirm button to go to the submenu to set.
HUE ： SATURATION ： CHROMA SUPPRESS ： GAMMA ： CONTRAST BACK EXIT
z
HUE: It is to set picture hue. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z
SATURATION: It is to set picture saturation. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
CHROMA SUPPRESS: It is to set picture color control. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
z
GAMMA: It is to set picture gamma. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
z
CONTRAST: It is to set picture contrast. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.8 Defog
Move the cursor to DEFOG and then click confirm button to go to the submenu to set.
DEFOG MODE ：OFF
INTENSITY ：1
LIGHT INTENSITY MODE ：AUTO
LIGHT INTENSITY LEVEL ：14 BACK EXIT
z DEFOG MODE: It is to set camera defog mode. It includes: manual/auto/off and etc. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z INTENSITY: It is valid when the defog mode is manual. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
z LIGHT INTENSITY MODE: It is to set air light intensity mode. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z LIGHT INTENSITY LEVEL: It is to set air light intensity value. It is valid when the air light intensity mode
is manual. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.3.9 Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.
17
Page 24
DIGITAL ZOOM :：OFF
DZOOM LIMIT ：X3
PICTURE FLIP ：OFF FREEZE FUNC ：OFF
STABLE ：OFF
CAMERA FACTORY DEFAULT CAMERA RESTATRT BACK EXIT
z DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
z DZOOM LIMIT: Here you can set the threshold of the digital zoom.
z PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z STABLE : it is to reduce the effect of the vibration on the camera
z CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm
button to restore factory default setup.
z CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.4 Function Setting
PRESET
AUTO PAN
AUTO SCAN
TOUR
PATTERN
IDLE FUNCTION
TIME TASK
NEXT PAGE
BACK EXIT
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can
see the above interface.
z PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.
z AUTO PAN: Move the cursor to PAN and then click confirm button to go to the third submenu.
z AUTO SCAN: Move the cursor to SCAN and then click confirm button to go to the third submenu.
z TOUR: Move the cursor to TOUR and then click confirm button to go to the third submenu.
z PATTERN: Move the cursor to PATTERN and then click confirm button to go to the third submenu.
z IDLE FUNCTION: Move the cursor to IDLE FUNCITON and then click confirm button to go to the third
submenu.
z TIME TASK: Move the cursor to TIME TASK and then click confirm button to go to the third submenu.
z NEXT PAGE: It includes: PRIVACY MASKING, PTZ SPEED, SET ZERO, POWER UP, MENU
PASSWORD, MENU IDEL, PTZ AUTO STOP, HEATER CONTROL and PTZ CORRECTION. Move
the cursor to the item and then click the confirm button to set. .
18
Page 25
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.4.1 Preset Setup
PRESET NO ：001
TITLE ：PRESET001
SETTING
CALL
BACK EXIT
Move the cursor to PRESET button and then click confirm button to go to set interface.
z PRESET NO: Please use left/right key to modify preset number. The different protocols support
different preset values.
z TITLE：Title text is the label used for you to identify the camera. System will automatically name a title
for the camera.
z SETTING: Please input preset number first and then select the monitor zone. Please move the cursor to
setting and click confirm button. The system will pop up a message: PRESET: ***. Here *** means
preset number. And the SETTING column pops up an OK. Now you successfully added a preset.
Please note, you need to enable display preset title function first (Main menu->display setting->preset
title).Repeat the above procedures to set more presets. Once you want to modify a preset, you can
input the preset number you want to modify and then follow the above steps to set the preset. You can
successfully modify a preset content.
z CALL: Here is to recall preset. Move the cursor to PRESET NO and then input corresponding preset
value. Then move the cursor to CALL and then click confirm button to go to a preset.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
For PELCO protocol user, please refer to the following special functions:
z Call preset: Call preset 28 or preset 95 to go to dome menu. Call preset 29 or preset 99 to go to scan.
Call preset 24 or preset 81 to go to pattern. Call preset 25 or preset 82 to go to tour. Call preset 30 or
preset 96 to stop scan or pattern. Call preset 31 or preset 83 to begin rotation. Call preset 33 to enable
PTZ 180 degrees rotation. Call preset 34 to set dome position as 0.
z Set preset: Set preset 26 or 92 to set scan left limit. Set preset 27 or 93 to set scan right limit. Set
preset 22 or 79 to begin record. Set preset 23 or 80 to stop record.
4.4.4.2 Pan
Move the cursor to PAN button and then click confirm button to go to setup interface.
z PAN SPEED: Set dome rotation speed. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
z CALL: Move the cursor to call item and then click confirm button. The dome begins 360 degrees
continuous rotation.
z STOP: Highlight stop item and then click confirm button. The dome stops rotation.
z BACK: Go back to previous menu.
PAN SPEED ：160 CALL STOP BACK EXIT
19
Page 26
z EXIT: Log out system menu.
4.4.4.3 Scan
AUTO SCAN NO ： 001 SET LEFT LIMIT SET RIGHT LIMIT SCAN SPEED ：160 CALL STOP BACK EXIT
Move the cursor to SCAN button and then click confirm button. z AUTO SCAN NO：Here is to set auto scan number. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
z SET LEFT LIMIT：Here is to set camera left address. Click confirm button to save current setup. z SET RIGHT LIMIT：Here is to set camera right address. Click confirm button to save current setup.
z SCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.
z CALL: Please input auto scan number first, and then please move the cursor to CALL and click confirm
button to activate auto scan function.
z STOP: Here is to terminate auto scan function.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.4.4 Tour
TOUR NO： ：001 TOUR SETTING DELETE TOUR RUN STOP BACK EXIT
Move the cursor to highlight TOUR item and then click confirm button to go to set interface. z TOUR NO ：Here is to ser tour number. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
z TOUR SETTING: Move the cursor to tour setting item and then click confirm button. You can see the
following interface. Here you can add or remove the preset, and set the corresponding dwell time and
call speed.
NO PRESET DWELL SPEED 01 000 005 013 02 000 005 013 03 000 005 013 … … … … 32 000 005 013
DWELL: Here is t set dwell time. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
SPEED: Here you can set the speed value.
When you move the cursor to one tour number, you can use left/right button to turn the page.
20
Page 27
When you move the cursor to one tour number, please click confirm button to set the tour. Please use
up/down button to set preset number, dwell time and speed. Use the left/right button to go to the next tour.
Click confirm button you can exit the setup. After you completed the setup, move the cursor to back button
to go to the previous interface. z DELETE TOUR：Here is to delete a tour. Input tour number in TOUR NO and then move the cursor to
DELETE TOUR, click confirm button to delete.
z CALL: Here is to activate tour. Input tour number in tour NO and highlight CALL, click confirm button to
activate touring.
z STOP: Here is to terminate touring.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.4.5 Pattern
PATTERN NO: ：001
PROGRAM START
PROGRAM STOP
CALL
STOP
BACK EXIT
Pattern function can memory PTZ operation and camera focus zoom in and zoom out.
From the start position, dome begins auto movement repeatedly.
Move the cursor to PATTERN and click confirm button.
z PATTERN NO： Here is to set pattern number. Please click left/right key to configure.
z PROGRAM START: Here is to memorize pattern starting point. An icon OK pops up in screen to prompt
you system begins memory pattern.
z PROGRAM STOP：Here is to set pattern stop point. After all the movement, move the cursor to
PROGRAM STOP and then click confirm button. Now you have set one pattern. System pops up an
icon OK to prompt you system has memories one pattern.
z CALL：Here is to activate pattern. Input pattern number, move the cursor to CALL and click confirm
button, system begins running pattern.
z STOP: Here is to stop current pattern. Input pattern number, move the cursor to STOP and click confirm
button. System stops current pattern.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
Note:
z The dwell time between two orders should be less than one minute, otherwise system will set to default
value as one minute.
z After click PROGRAM STOP, do not click CALL button before icon “●” disappears completely.
z Any manual operation during the pattern procedure will terminate current dome pattern operation.
4.4.4.6 Idle Function
21
Page 28
IDLE FUNC ：OFF
IDLE TIME ：010MIN
IDLE ACTION ：PRESET
PARAMETER ：NONE
SAVE
BACK EXIT
When there is no available command for specified time, dome automatically goes on the previous set
functions.
• IDLE FUNCTION ：There are two modes ON/OFF. Please use left/right key to set.
• IDLE TIME: System idle period. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
• IDLE ACTION：There are several functions you can select:
NONE/PRESET/SCAN/TOURING/PATTERN. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
• PARAMETER: It is to set idle motion SN. System can implement the corresponding action when it is idle for the specified period. Click the left/right button to set.
• SAVE：Move the cursor to SAVE and click confirm button to save current setup.
• BACK: Go back to previous menu.
4.4.4.7 Time Task (Schedule task)
• TASK NO: Here you can set task number. Please use the left’/right button to set.
• TIME TASK: The schedule task allows the speed dome to implement corresponding setup during the
specified time. There are two options: on/off. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
• TASK SETTING: Here you can set task time, operation, operation SN and etc. Please click the confirm button to go to the fourth menu to set.
• TASK INFORMATION: Here you can view the corresponding task information. Please click the confirm button to go to the fourth menu to set.
• DELETE TASK: Please input the task number to be deleted in the TASK NO, and then move the cursor to the current item. Click the confirm button, you can remove all the setups in the current
schedule task. Now current task is null.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Task Setting
Move the cursor to the TASK SETTING and then click the confirm button, you can set the task begin
time, end time, action and etc.
TASK NO ：1 TIME TASK ：OFF TASK SETTING TASK INFORMATION DELETE TASK BACK EXIT
WEEK ：1 START TIME ：OFF END TIME RUN ACTION PRESET NO SAVE BACK EXIT
22
Page 29
• WEEK: Here you can set the week information. Please use the left/right button to set. You can set for one day, or you can set for the whole week.
• START TIME: Here you can set the task begin time. Move the cursor to current item and then click confirm button to set the time. Please use the up/down button to set the detailed value and then use
left/right button to go to the next setup item. After you completed the setup, please click confirm
button to exit start time setup and then move the cursor to the SAVE button to save current setup.
• END TIME: Here you can set the task end time. Move the cursor to current item and then click confirm button to set the time. Please use the up/down button to set the detail value and then use
left/right button to go to the next setup item. After you completed the setup, please click confirm
button to exit end time setup and then move the cursor to the SAVE button to save current setup.
• TASK ACTION: The option here includes: none/tour/scan/preset/patter and etc. Please use left/right button to set.
• OPERATION NO: It is the corresponding serial number of the schedule task. The number here may vary due to different action types.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Task Information
Move the cursor to the TASK INFORMATION and then click the confirm button to go to the following
interface. Here you can see the corresponding task information. Click the confirm button again, you can
exit current interface.
NO TIME ACTION
1 ALL 00：00－00：00 SC001 OFF
2 ALL 00：00－00：00 SC001 OFF
3 ALL 00：00－00：00 SC001 OFF
4 ALL 00：00－00：00 SC001 OFF
5 ALL 00：00－00：00 SC001 OFF
6 ALL 00：00－00：00 SC001 OFF
7 ALL 00：00－00：00 SC001 OFF
4.4.4.8 Next Page
Move the cursor to the NEXT PAGE and then click the confirm button, you can go to the third menu to
set the PTZ SPEED, SET ZERO, POWER UP and etc.
PRIVACY MASK ： PTZ SPEED ： SET ZERO POWER UP MENU PASSWORD MENU IDLE PTZ AUTO STOP NEXT PAGE SAVE BACK EXIT
HEATER CONTROL
PTZ CORRECTION ：OFF
23
Page 30
• PRIVACY MASK: Here you can set the privacy mask number and etc. It includes the third menu. Please move the cursor to the current item and then click the confirm button to go to the next
interface.
• PTZ SPEED: It is to set PTZ speed. Please use the left/right button to set.
• SET ZERO: It is to set the PTZ initial position. Please move the PTZ to the corresponding position
and then click the confirm button to complete the setup.
• POWER UP: It is to set the PTZ action when the speed dome boots up. Click the confirm button to go to the next interface. To set
• MENU PASSWORD: It is to set the password to go to the PTZ menu. Click the confirm button to go to the next interface. To set
• MENU IDLE: If current setup is ON, once you open the menu and leave it idle for specified period, the menu may automatically disappear. If current setup is OFF, the menu is always there and will
not disappear. Please use the left/right button to set.
• PTZ AUTO STOP: The speed dome will stop all the PTZ operations when there is no command for the specified time. It includes various setups. Please use the left/right button to set.
• HEATER CONTROL: There are three options: NO/NC/Auto. The default setup is auto.
• PTZ CORRECTION: It is to set speed dome self-diagnosis. Use the left/right button to set on/off.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Privacy Mask
Move the cursor to PRIVACY MASK and click confirm button, system goes to privacy mask setup interface.
PRIVACY NO ： 1
PRIVACY MASKING ：OFF
SETTING
BACK EXIT
RESIZE ：↑
SAVE
BACK EXIT
Note:
z For security reasons, please set privacy zone a little bit larger than the privacy object size.
z Each time, after modifications you need to move the cursor to SAVE button and then click confirm
button to get all setup activated. Otherwise, privacy zone may not move correspondingly with the object.
Please enter privacy mask menu.
Move the cursor to PRIVACY NO, please use left/right key to set different privacy zones.
For example, shift to 001 section and then move the cursor to SETTING.
Secondly, click OK button to go to the setup interface. Now there is a privacy zone in the screen centre.
Operate PTZ to move the camera screen so that the centre of the object you want to shield is overlaying
with the centre of the screen.
Thirdly, move the cursor to RESIZE and then click left and right key to adjust privacy zone direction and size.
Fourthly, move the cursor to SAVE and then click confirm button to exit. Please note you need to click SAVE
button to save current privacy mask setup so that the privacy mask region can move along with the PTZ
movement to always cover the object you want to shield. z PRIVACY NO：Here is to set privacy mask zone. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set. You can call corresponding privacy mask zone number if you
have successfully set one.
z PRIVACY MASKING: There are two settings: on and off. Please go to the corresponding privacy mask
zone and click left/right button to set.
24
Page 31
z RESIZE：It is to adjust the privacy zone size. Move the cursor to current item and use the left/right
button on the keyboard or in the speed dome terminal menu to set .Please continue pressing direction
button to widen or narrow zone size. ← is to narrow the horizontal width and → is to widen the
horizontal width. ↑ is to widen vertical height and ↓ is to narrow the vertical height.
z SAVE：Here is to save user setup.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
Power Up
Move the cursor to the POWER UP item and then click the confirm button, you can go to the fourth
menu.
POWER UP ：1 PARAMTER ：OFF BACK EXIT
• POWER UP: It is to set the PTZ operation when the speed dome boots up. The option includes: NONE/AUTO/SCAN/PRESET/PATTERN/TOUR and etc. Please use the left/right button to set.
• PARAMTER: Here you can set the serial number of the corresponding operation such as the scan, preset, pattern, tour. Please use the left/right button to set.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Menu Password
Move the cursor to the MENU PASSWORD and the click the confirm button to go to the fourth menu.
PASSWORD：
1 2 3 4 5
6 7 8 9 0
→ SAVE BACK
PASSWORD ：
SETTING ：
BACK
EXIT
• PASSWORD: Enable this function here so that you set password is valid. This function is on by default after you set password.
• SETTING: Click the confirm button to go to the password setup interface. Please use the left/right button to set the value and then click the confirm button to confirm current option. Move the cursor to
the SAVE button and then click the confirm button to save current setup. Click the BACK button to
go to the previous menu.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
If you have forgot your password. After three times of login failure, system may pop up an 8-digit internal code. Please contact our technical engineer for help.
Heater Control
Move the cursor to highlight HEATER CONTROL button and then click confirm button. You can go to the 4
menu.
HEATER CONTROL ：AUTO OPEN TEMPERATURE ： COLSE TEMPERATURE ： BACK EXIT
th
25
Page 32
z HEATER CONTROL: It is to set temperature control mode. It includes three modes: auto/normal
open/normal close. Please use the left/right button on the keyboard or in the speed dome terminal menu
to set.
z OPEN TEMPERATUREP: This function is on when the heater control mode is auto. It is for you to set
temperature to enable the heater.
z CLOSE TEMPERATURE: This function is on when the heater control mode is auto. It is for you to set
temperature to disable the heater.
z BACK: Go back to the previous menu.
z EXIT: Log out the system menu.
4.4.5 IR Light Setting
Move the cursor to highlight IR LIGHT SETTING button and then click confirm button.
z IR SENSITIVITY: Here you can enable the IR light sensitivity function.
z IR LIGHT CTRL: There are three options: Zoom rate has the higher priority and manual. Please use the
left/right button to set.
z NEAR LIGHT: It is the medium and near light brightness. This function is valid in MANUAL mode. z FAR LIGHT: It is the far light brightness. This function is valid in MANUAL mode. z IR LIGHT COMPENSATION: It is the whole compensation level of the IR light. This function is valid
when the zoom rate has the higher priority.
z BACK: Go back to the previous menu.
z EXIT: Log out the system menu.
IR SENSITIVITY: ：04 IRLIGHT CTRL ：ZOOM PRI NEAR LIGHT ：50 FAR LIGHT ：50 IRLIGHT COMP: 03 BACK EXIT
4.5 Dome Abnormal Phenomenon Operation
4.5.1 Restore to Factory Default Setup
From main menu-> SYSTEM INFORMATION, move cursor to FACTORY DEFAULT and click confirm button.
Dome will reboot and all the setups restore to factory default setup.
4.5.2 PTZ Movement is not smooth
From menu to SYSTEM INFORMATION, move cursor to RESTART and click confirm button. This reboot
will not modify all activated setup (such as preset, tour and pattern)
26
Page 33
5 Cable Connection
5.1 Combination Cable Connection
The speed dome combination cable includes network cable, audio/video cable connection port, RS485
connection port, alarm input and output port. Please refer to the label for detailed information.
z Please note the IE6 does not support alarm upload function. Please use IE7 or higher version. z If it is your first time to boot up the WEB on the Windows 7 OS, please right click the Internet
Explorer icon on the desktop and then select “Run as Administrator”.
z Slight difference may be found in the port amount since some functions are optional.
Name Function
POWER GND
Power port. Connect to the power cable. GND: ground end.
485A
RS485 remote control.
485B AUDIO
OUT Audio output port.
GND Ground port.
IN Audio input port.
GND Ground port. VIDEO
OUT Video output port.
LAN Network port. Connect to network cable.
ALARM IN
z Seven alarm input channels. It is to receive relay signal from the
external alarm source. You can go to dome menu to activate specified preset or patter.
z When the activation mode is NO (normal open), dome alarms
when there is low voltage. High voltage will not activate the alarm.
z When the activation mode is NC (normal close), dome alarms
when there is high voltage. Low voltage will not activate the alarm.
Note:
z Dome alarm input message is ground mode. z Dome alarm input signal are two modes: normal open and
normal close.
z The default setup: 7-channel alarm input.
GND Alarm input ground end.
ALARM OUT
2
5.2 System Layout
z Two alarm output channels. When there is an alarm from current
channel, system activates relay or not.
z Alarm output relay default setup is NO.
z The default setup: 2-channel alarm output.
27
Page 34
5.2.1 System Connection
Please refer to Figure 5-1 for system connection information.
AC220V Input
Transfor
mer
Power
Output
Figure 5-1
5.2.2 Alarm Connection
Please refer to Figure 5-2 for alarm connection information.
Network
Output
P C
DVR
Figure 5-2
28
Page 35
6 FAQ
6.1 Daily Maintenance
Please clean dome cover regularly to get vivid image.
Handle the cover with care. Use water to wash. Don’t use cloth to clean.
Note:
The sweat from your hand may erode plating surface, your nail may scrape dome cover resulting in blur
image.
6.2 Problems and Solutions
SYMPTOM CAUSE SOLUTION
1) No self-diagnosis, no video signal when I connect dome to power.
There is a noise
successive
5) During camera switch, there is a tilt movement in the monitor.
Red LED is not on. z Your power supplying does
not apply to the power. Or connection is too loose.
z Power off or transformer
problem. Red LED light on the power board is on
z Power supplying is low
z Something wrong with power
board.
Power supplying is inadequate. Replace power supplying. 2) No self diagnosis. Mechanical malfunction. Need electrical engineer help. Circuit connection is too loose. Connect tightly. 3)Video signal is not Video switch or power problem Need electrical engineer help.
Focus is in manual mode. Control manually. 4) Video is not clear. Dome cover is dirty. Wash dome cover Camera power is not in the same Phase.
z Check power is connected or
properly earthed.
z Check power supply condition
or check transformer.
z Use multimeter to check
dome load.
z Please contact retailer to
replace power board.
When several domes are connected to one transformer, please connect the transformer output cable to the domes’ same side.
29
Page 36
7 Appendix Ⅰ Thunder Proof and Surge Protection
This series speed dome adopts TVS lighting protection technology. It can effectively prevent damages from
various pulse signals below 1500W, such as sudden lighting and surge. While maintaining your local
electrical safety code, you still need to take necessary precaution measures when installing the speed dome
in the outdoor environment.
z The distance between the signal transmission cable and high-voltage device (or high-voltage cable)
shall be at least 50 meters.
z Outdoor cable layout shall go under the penthouse if possible.
z For vast land, please use sealing steel tube under the land to implement cable layout and connects one
point to the earth. Open floor cable layout is forbidden.
z In area of strong thunderstorm hit or near high sensitive voltage (such as near high-voltage transformer
substation), you need to install additional high-power thunder protection device or lightning rod.
z The thunder protection and earth of the outdoor device and cable shall be considered in the building
whole thunder protection and conform to your local national or industry standard.
z System shall adopt equal-potential wiring. The earth device shall meet anti-jamming and at the same
time conforms to your local electrical safety code. The earth device shall not short circuit to N (neutral)
line of high voltage power grid or mixed with other wires. When connect the system to the earth alone, the earth resistance shall not be more than 4Ω and earth cable cross-sectional area shall below 25
mm2. See Figure 7-1.
Figure 7-1
30
Page 37
8 Appendix 2 Toxic or Hazardous Materials or Elements
Toxic or Hazardous Materials or Elements
Component
Name
Pb Hg Cd Cr VI PBB PBDE
Sheet Metal ○ ○ ○ ○ ○ ○
Plastic Parts ○ ○ ○ ○ ○ ○
PCB ○ ○ ○ ○ ○ ○
Housing
Camera Driver
○
○
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Bearing ○ ○ ○ ○ ○
Connection
Cable
Motor
(If possible)
Power
(If possible)
Bracket
(If possible)
Accessories ○ ○ ○ ○ ○ ○
Note
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials
in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the environmental-
friendly use period (EFUP) period, the toxic or hazardous substance or elements contained in products will
not leak or mutate so that the use of these (substances or elements) will not result in any severe
environmental pollution, any bodily injury or damage to any assets. The consumer is not authorized to
process such kind of substances or elements, please return to the corresponding local authorities to process
according to your local government statutes.
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○
31
Page 38
Note
• This manual is for reference only. Slight difference may be found in the user interface.
• All the designs and software here are subject to change without prior written notice.
• All trademarks and registered trademarks are the properties of their respective owners.
• If there is any uncertainty or controversy, please refer to the final explanation of us.
• Please visit our website or contact your local service engineer for more information.
32
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use