ICRealtime ICIP-D5000VIR User Manual

HD (IR) Vandal Proof Network Dome Camera User’s Manual

Version 1.6.0

Welcome

Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction)

Please note: Do not connect two power supplying sources to the device at the same time; it may result in device damage! The product must be grounded to reduce the risk of electronic shock.

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.

3．Installation

Do not apply power to the camera before completing installation. Please install the proper power cut-off device during the installation connection. Always follow the instruction guide the manufacturer recommended.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series network camera should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. Please keep it away from the electromagnetic radiation object and environment. Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device. Otherwise it may result in CCD (CMOS) optical component damage. Please keep the sound ventilation. Do not allow the water and other liquid falling into the camera. Thunder-proof device is recommended to be adopted to better prevent thunder. The grounding studs of the product are recommended to be grounded to further enhance the reliability of the camera.

6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance work.

Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the device. Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera. Dome enclosure is the optical component, do not touch the enclosure when you are installing the device or clean the enclosure when you are doing maintenance work. Please use professional optical clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result in poor IR effect of camera with IR function.

7. Accessories

Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.

Accessory Name Amount Network Camera 1 Quick Start Guide 1

Installation Accessories Bag 1 CD 1

iii

Table of Contents

1 General Introduction .................................................................................................................. 1

1.1 Overview ........................................................................................................................ 1

1.2 Features ......................................................................................................................... 1

1.3 Specifications ................................................................................................................ 2

1.3.1 Performance ........................................................................................................... 2

2 Structure ...................................................................................................................................... 4

2.1 Dimensions .................................................................................................................... 4

2.2 Port Description ............................................................................................................ 4

2.3 Bidirectional talk.......................................................................................................... 10

2.3.1 Device-end to PC-end ........................................................................................ 10

2.3.2 PC-end to the Device-end .................................................................................. 10

2.4 Alarm Setup ................................................................................................................. 11

3 Installation.................................................................................................................................. 13

3.1 Device Installation Introduction ................................................................................ 13

3.2 Device Installation Steps ........................................................................................... 13

3.2.1 Manual Zoom Lens Focus Operation ............................................................... 17

3.2.2 Side Cable Exit .................................................................................................... 18

3.2.3 Cable Connection ................................................................................................ 18

3.3 Micro SD Card Installation ........................................................................................ 20

4 Quick Configuration Tool ......................................................................................................... 21

4.1 Overview ...................................................................................................................... 21

4.2 Operation ..................................................................................................................... 21

5 Web Operation .......................................................................................................................... 23

5.1 Network Connection ................................................................................................... 23

5.2 Login and Main Interface ........................................................................................... 23

6 FAQ ............................................................................................................................................ 25

Appendix Toxic or Hazardous Materials or Elements ............................................................... 26

1 General Introduction

1.1 Overview

This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device.

This series network camera uses standard H.264 and MJPEG video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality.

This series network camera enclosure has the strong resistance capacity, which can guarantee the proper work performance under heavy strike. It supports real-time monitor and listening at the same time. It supports analog video output and dual-way bidirectional talk.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the network and then use a network client-end. Due to its multiple functions and various uses, this series network camera is widely used in many environments such office, bank, road monitor and etc.

1.2 Features

User

Management

Storage

Function

Alarm

Function

Network

Monitor

Network

Management

Peripheral

Equipment

 Different user rights for each group, one user belongs to one group.  The user right shall not exceed the group right.

 Support central server backup function in accordance with your configuration and

setup in alarm or schedule setting

 Support record via Web and the recorded file are storage in the client-end PC.  Support built-in Micro SD card.  Support local Micro SD card hot swap, support short-time storage when

encounter disconnection.

 Real-time respond to external local alarm input and video detect as user pre-

defined activation setup and exert corresponding message in screen and audio prompt(allow user to pre-record audio file)

 Real-time video detect: motion detect, tampering.  Can generate an alarm when network abnormal, Micro SD card abnormal event

occurred.

 Network camera supports one-channel audio/video data transmit to network

terminal and then decode. Delay is within 270ms (network bandwidth support needed)

 Max supports 20 connections.  Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,

MULTICAST, RTP/RTCP, RTSP and etc.

 Support web access, widely used in WAN.  Realize network camera configuration and management via Ethernet.  Support device management via web or client-end.  Support various network protocols.  Support the on-off alarm device to alarm via the sound or the light.

Power

 External power adapter DC12V/AC 24V  Support PoE.

Warning！ Do not connect these two power supplying sources to the device at the same

time; it may result in device damage!

 Log function  Support PAL/NTSC  Day/Night mode auto switch (electromagnetic ICR switch).

Assistant

Function

 Support iris auto adjust.  Built-in IR light. Support IR night vision.  Backlight compensation: screen auto split to realize backlight compensation to

adjust the bright.

 Support electronic shutter and gain setup.  Support video watermark function to avoid vicious video modification.

1.3 Specifications

1.3.1 Performance

Please refer to the following sheet for network camera performance specification.

Model Parameter

System

Video Parameter

Main Processor

OS Embedded LINUX System

Resources User Interface Remote operation interface such as WEB, DSS, PSS

System Status Micro SD card status, bit stream statistics, log, and software version. Image Sensor 1/2.5-inch CMOS Pixel Day/Night

Mode Auto Iris DC drive

Gain Control Manual/Auto

ICIP D5000AVIR

High performance DSP

Support real-time network, local record, and remote operation at the same time.

2560（H）*1920（V） Support day/night mode switch and electromagnetic IR-CUT at the same

time.

White Balance Manual/Auto BLC On/Off

Electronic Shutter

Motorized Focus Video Compression Standard

Video Frame Rate

Video Bit Rate Video Flip Support mirror.

Manual/Auto PAL：It ranges from 1/3 to 1/100000. NTSC：It ranges from 1/4 to 1/100000.

Support remote motorized focus function. H.264 /H.264H/MJPEG

Note: Some versions do not support H.264H. PAL:

Main stream (2560*1920@20fps) Extra stream (704*576@25fps)

NTSC: Main stream (2560*1920@20fps) extra stream 1(704*480@30fps)

H.264H: 40Kbps-8192Kbps. It is adjustable MJPEG: 40Kbps-16384Kbps. adjustable and bit rate is adjustable. Support customized setup.

Support flip, corridor function.

Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones ROI Support max 4 ROI zones Video Setup Support parameter setup such as brightness, contrast.

Video Information Lens 4~9mm@F1.2 motorized zoom focus lens

Lens Interface

Audio

Video

Alarm Input

and

Backup

Audio Input 1-channe, RCA audio input Audio Output 1-channel RCA audio output

Bidirectional Talk Input

Audio Bit Rate 8kbps 16bit or 16kbps 16bit Audio

Compression Standard

Motion Detect

Video Loss

Record

Record Priority

Channel title, time title, motion detect, tampering, overlay.

φ 14 interface. Lens is the default accessories.

Reuse the first audio input channel

G.711a/G.711Mu 396 (18*22) detection zones; sensitivity level ranges from 0 to 100; area

threshold ranges from 0 to 100. Activation event: alarm device, audio/video storage, image snapshot, log, email function and etc. Activation event, alarm device, audio/video storage, image snapshot, log, email function and etc.

1-channel input，1-channel output Manual>External alarm >Video detect>Schedule

Storage Management

Network

Interface

General Parameter

Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet Network

Protocol Remote Operation

Protocol PSIA, ONVIF Video Output

AUX

Reset Built-in RESET button IR light IR distance 20 to 30 meters (For Power Support AC 24V/DC12V power and PoE

Power Consumption Working Temperature Working Humidify Dimensions(m m)

Weight 1.25Kg Installation Support various installation modes

Support Micro SD card storage, NAS storage

HTTP,TCP,ARP,RTSP,RTP,UDP,RTCP,SMTP,FTP,DHCP,DNS,DDNS,PP POE,IPv4/v6,SNMP,QoS,UPnP,NTP, 802.1x

Monitor, system setup, log information, maintenance , upgrade and etc

1-channel analog video output，BNC port

General series: below 5W. IR series: below 7W.

-30℃~+60℃ ≤95% ¢151x119

2 Structure

2.1 Dimensions

You can refer to the following figures for dimension information. The Unit is mm. See Figure 2-1 and

Figure 2-2.

Figure 2-1 Dimension 1

Figure 2-2 Dimension 2

2.2 Port Description

For the non-IR series product, the interface is shown as in Figure 2-3 and Figure 2-4.

Note： Figure in this chapter are all for reference only, and please refer to model 1-a and 1-b

according to actual product.

Figure 2-3 Camera internal without IR (1-a)

Figure 2-4 Camera internal without IR (1-b)

See Figure 2-5.

+ 21 hidden pages