HD (IR) Vandal Proof Network Dome Camera User’s Manual
Version 1.6.0
i
Welcome
Thank you for purchasing our network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
ii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction)
Please note: Do not connect two power supplying sources to the device at the same time; it may
result in device damage! The product must be grounded to reduce the risk of electronic shock.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
iii
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
Dome enclosure is the optical component, do not touch the enclosure when you are installing the
device or clean the enclosure when you are doing maintenance work. Please use professional optical
clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result
in poor IR effect of camera with IR function.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name Amount
Network Camera 1
Quick Start Guide 1
Installation Accessories Bag 1
CD 1
iv
Table of Contents
1 General Introduction .................................................................................................................. 1
1.1 Overview ........................................................................................................................ 1
1.2 Features ......................................................................................................................... 1
1.3 Specifications ................................................................................................................ 2
1.3.1 Performance ........................................................................................................... 2
2 Structure ...................................................................................................................................... 5
2.1 Dimensions .................................................................................................................... 5
2.2 Port Description ............................................................................................................ 5
Note： ......................................................................................................................................... 5
2.3 Bidirectional talk............................................................................................................ 8
2.3.1 Device-end to PC-end .......................................................................................... 8
2.3.2 PC-end to the Device-end .................................................................................... 8
2.4 Alarm Setup ................................................................................................................... 9
3 Installation.................................................................................................................................. 11
3.1 Device Installation Introduction ................................................................................ 11
3.2 Device Installation Steps ........................................................................................... 11
3.2.1 Side Cable Exit .................................................................................................... 15
3.2.2 Cable Connection ................................................................................................ 15
3.3 Micro SD Card Installation ........................................................................................ 17
4 Quick Configuration Tool ......................................................................................................... 18
4.1 Overview ...................................................................................................................... 18
v
4.2 Operation ..................................................................................................................... 18
5 Web Operation .......................................................................................................................... 20
5.1 Network Connection ................................................................................................... 20
5.2 Login and Main Interface ........................................................................................... 20
6 FAQ ............................................................................................................................................ 22
Appendix Toxic or Hazardous Materials or Elements ............................................................... 23
1
1 General Introduction
1.1 Overview
This series network camera integrates the traditional camera and network video technology. It adopts
audio and video data collection, transmission together. It can connect to the network directly without any
auxiliary device.
This series network camera uses standard H.264 and MJPEG video compression technology and
G.711a audio compression technology, which maximally guarantee the audio and video quality.
This series network camera enclosure has the strong resistance capacity, which can guarantee the
proper work performance under heavy strike. It supports real-time monitor and listening at the same time.
It supports analog video output and dual-way bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the network
and then use a network client-end. Due to its multiple functions and various uses, this series network
camera is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
Different user rights for each group, one user belongs to one group.
The user right shall not exceed the group right.
Storage
Function
Support central server backup function in accordance with your configuration and
setup in alarm or schedule setting
Support record via Web and the recorded file are storage in the client-end PC.
Support built-in Micro SD card.
Support local Micro SD card hot swap, support short-time storage when
encounter disconnection.
Alarm
Function
Real-time respond to external local alarm input and video detect as user pre-
defined activation setup and exert corresponding message in screen and audio
prompt(allow user to pre-record audio file)
Real-time video detect: motion detect, tampering.
Can generate an alarm when network abnormal, Micro SD card abnormal event
occurred.
Network
Monitor
Network camera supports one-channel audio/video data transmit to network
terminal and then decode. Delay is within 270ms (network bandwidth support
needed)
Max supports 20 connections.
Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
Support web access, widely used in WAN.
Network
Management
Realize network camera configuration and management via Ethernet.
Support device management via web or client-end.
Support various network protocols.
Peripheral
Equipment
Support the on-off alarm device to alarm via the sound or the light.
Power
External power adapter DC12V/AC 24V
Support PoE.
Warning！
Do not connect these two power supplying sources to the device at the same
2
time; it may result in device damage!
Assistant
Function
Log function
Support PAL/NTSC
Day/Night mode auto switch (electromagnetic ICR switch).
Support iris auto adjust.
Built-in IR light. Support IR night .
Backlight compensation: screen auto split to realize backlight compensation to
adjust the bright.
Support electronic shutter and gain setup.
Support video watermark function to avoid vicious video modification.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification.
Model
Parameter
ICIP D3000VIR-I
System
Main
Processor
TI high performance DSP
OS Embedded LINUX
System
Resources
Support real-time network, local record, and remote operation at the same
time.
User Interface Remote operation interface such as WEB, DSS, PSS
System Status Micro SD card status, bit stream statistics, log, and software version.
Video Parameter
Image Sensor 1/3-inch CMOS
Pixel
2048(H)×1536(V)
Day/Night
Mode
Support day/night mode switch and electromagnetic IR-CUT at the same
time.
Auto Iris DC drive
Gain Control Manual/Auto
White Balance Manual/Auto
BLC On/Off
Electronic
Shutter
Manual/Auto
PAL：It ranges from 1/3 to 1/30000.
NTSC：It ranges from 1/4 to 1/30000.
Motorized
Focus
Support remote motorized focus function.
NR Support 3D NR
WDR 120dB WDR
Video Setting Support rotate mode
Intelligent
Detection
Tripwire, cross warning zone, abandoned object detection, missing object
detection, scene change and out of focus.
Face
Recognition
Detect face in video and link according to the result
Audio
Detection
Detect if there is audio source input, filter noise and etc.
Anti-IR
Overexposure
Auto detect image brightness, anti-overexposure via internal algorithm
vision
3
Video
Compression
Standard
H.264/H.264H/H.264B/MJPEG
Video Frame
Rate
PAL:
Main stream max(2048*1536@25fps), extra stream max(704*576@25fps),
third stream (1920*1080@25fps)
NTSC:
Main stream max(2048*1536@30fps), extra stream max(704*480@30fps),
third stream (1920*1080@30fps)
Video Bit Rate
16Kbps-32Mbps. It is adjustable
Support customized setup.
Video Flip
Support mirror.
Support flip function.
Snapshot
Max 1f/s snapshot. File extension name is JPEG.
Privacy Mask
Supports max 4 privacy mask zones
Video Setup
Support parameter setup such as brightness, contrast.
Video
Information
Channel title, time title, motion detect, tampering.
Lens
3～9mm@F1.2motorized zoom focus lens
Lens Interface
φ 14 interface. Lens is the default accessories.
Audio
Audio Input
1-channe, RCA audio input
Audio Output
1-channel RCA audio output
Bidirectional
Talk Input
Reuse the first audio input channel
Audio Bit Rate
64kbps 16bit
Audio
Compression
Standard
G.711a/G.711Mu
Video
Motion Detect
396 (18*22) detection zones; sensitivity level ranges from 0 to 100; area
threshold ranges from 0 to 100.
Activation event: alarm device, audio/video storage, image snapshot, log,
email function and etc.
Video Loss
Activation event, alarm device, audio/video storage, image snapshot, log,
email function and etc.
Alarm Input
1-channel input，1-channel output
Record
and
Backup
Record
Priority
Manual>External alarm >Video detect>Schedule
Local Storage
Support Micro SD card storage
Network
Wire Network
1-channel wire Ethernet port, 100/1000 Base-T Ethernet
Network
Protocol
HTTP,TCP,ARP,RTSP,RTP,UDP,RTCP,SMTP,FTP,DHCP,DNS,DDNS,PP
POE,IPv4/v6,SNMP,QoS,UPnP,NTP.
Remote
Operation
Monitor, system setup, log information, maintenance , upgrade and etc
AUX
Interface
Video Output
1-channel analog video output，BNC port
Reset
Built-in RESET button
IR light
IR distance 20 to 30 meters (For IPC-HDBW series product only)
General
Paramet
er
Power
Support AC 24V/DC12V power. PoE.
Power
Consumption
Max 14W (IR ON)
Working
-30℃~+60℃