a. Toxic or Hazardous Elements .................................................... 13
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Chapter
1
T
Features and Specifications
This section outlines the primary features of the ICRealtime ICIP-D2360 IP Camera. It
also outlines basic Architectural and Engineering specifications.
1.a Overview
his IC Realtime series product is an excellent situational awareness IP Camera designed for the security
field. It adopts an embedded Linux operating system to maintain reliable, 24/7 operation. Utilizing
both H.264 video compression and G.711 audio compression technology enables the highest quality of
recorded audio/video, while maintaining the lowest bitrate utilization.
The D2360 series is an entry level, 2 MegaPixel IP Camera with an integrated microphone. This IPC is fully
suited for full operation as a standalone device, or can be paired to one of our ICR Network Video Recorders
to add a great duration of recorded video.
The 2MP recording resolution and extreme wide angle lens design makes this IPC well equipped for installation
in various institutions ranging from residential, commercial, governmental, and enterprise environments.
1.b Features
IC Realtime D2360 series IP Cameras all support the following features:
Real-time Monitoring
This IP Camera records 1080P video at a full 30 FPS.
Secure Archiving
Audio Video data is compressed and packaged into a secure, and proprietary video format (.dav files). This
bolsters archived video integrity, and prevents vicious data manipulation. Video is also watermarked with
special data for evidentiary purposes.
1
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Compression Format
H.264 video and G.711 audio enables high quality video recording while maintaining the lowest file sizes
possible.
SD Card Storage
As a standalone device, the IPC can hold a 64GB micro SD card suitable for storing video direct from the
camera.
Network Operation
Full system control (including live view, playback, backup, PTZ control, and system configuration) is available
with over the network. Client software is available for both Mac and PC systems.
EPTZ Control
This IPC includes a special dewarping algorithm, enabling users to ‘Virtually’ Pan/Tilt/Zoom across a high
resolution image, in order to get the highest visibility and situational awareness from the camera.
2
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Max. User Access
10 users
Smart Phone
iPhone, iPad, Android, Windows Phone
General
Power Supply
DC12V, PoE(802.3af)
Memory Slot
Micro SD
Power Consumption
<2.5W
Working Environment
-10°C~+60°C, 10%~90%
Dimensions
Φ110×54mm
Weight
0.25kg
1.d Dimensions
4
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
5
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Chapter
2
Camera Installation
This section outlines the proper way to mount and install an ICIP-D2360 series IP
Camera. Suitable methods of installing the IPC include either Ceiling installation,
Ground Installation, or Wall installations. Note that hardware including screws and
anchors are included for the camera installation.
2.a General Overview
6
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
2.b Step by Step Guide
Step 1: Remove the cameras dome cover
Using the included hex wrench from the accessories kit, unfasten the 3 hex screws on the dome camera
enclosure and then remove it.
Step 2: Place mounting template
Included with the camera is a mounting template that can be adhered to the target installation surface for ease
of installation. Following the diagram, bore 3 small holes as indicated on the diagram, around the perimeter of
the template. Once you’ve created your holes, insert the plastic anchors securely and firmly.
If you need to pass the cameras cable through the mounting plate, be sure to bore out the template area marked
‘Cable Exit’ to allow for the female RJ-45 plug to pass through.
If you need to pass the cameras cable through the side of the cameras enclosure, be sure to snip out the Ushape knock out in order to allow the cable a wire path.
Step 3: Mount camera base
Adjust the cameras base plate, and pull the cable through your exit hole. Match the ”TOP” direction of the
camera with that from the installation template. Align the 3 base plate holes with the plastic anchors from Step
2. Using (3) ST3.0 self tapping screws from the accessories kit, fix the camera base plate onto the installation
surface by screwing the ST3.0 screws through the holes, and into the plastic anchors.
Step 4: Replace dome cover
Lastly, take the dome cover and align it with the base plate that is now fixed to the installation surface. Using
the hex key from step 1, replace the 3 hex screws, securing the dome back in place.
7
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
2.c SD Card Installation
Step 1: Disconnect power source from the IP Camera
SD cards shall not be installed or removed while the camera is powered and operational. Doing so can
potentially result in damage to the camera, and any data stored on the SD card.
Step 2: Remove the cameras dome cover
Using the included hex wrench from the accessories kit, unfasten the 3 hex screws on the dome camera
enclosure and then remove it..
Step 3: Insert SD card
Look on the base plate of the camera to see the section labeled “SD Card”. Insert your micro SD card (Pin
side down) until it clicks securely into place. At this point you can restore power to the camera, and attache the
dome cover again.
8
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Chapter
3
Web GUI Operation
This section outlines how to assign an IP address to the camera, and how to access and
control the IPC via it’s built in Web Ineterface.
3.a Network Connection
Step 1: Ensure the Camera is physically connected to your Network, and Powered ON.
Patch the IP Camera into your network with a standard Ethernet cable. Provide the camera with power either
via PoE or with the separate 12VDC power input jack.
Step 2: Assign an IP address to the IP Camera.
The ICIP-D2360 Series camera (and all ICR IP Cameras) have a factory default static IP address of
192.168.1.108. If this matches the same subnet as your LAN, you will be able to login to the camera by typing
this address into your browser (assuming that the IP address does not conflict with another device on your
network).
Alternatively, you can use our IP Auto Search utility to rapidly find and change IP addresses for IC Realtime
series IP Cameras. The utility is available on our support page at :
http://www.icrealtime.com/docs/IPAutoSearch.zip
3.b Logging In, and Main Interface
Step 1: Open up your Web Browser (Safari, Chrome, Firefox, or IE) and input the IP address
of your IP camera.
In Example, open Safari and browse to http://192.168.1.108
9
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Step 2: Follow the on screen prompts to install the plugin
When you first access the IP Camera over your web browser, you will be prompted to install the plugin. See
below:
Step 3: Login to the camera with the default credentials
By default, the username is ‘admin’ and the password is ‘admin’. It is always strongly recommended to change
the default passwords after the initial setup. The cameras login page should appear as below:
10
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
3.c EPTZ Controls
One of the primary features and functions of this series IP Cameras is its virtual Pan/Tilt/Zoom Capabilities. Read on for a stepby-step guide on how to control the multiple viewing options of the ICIP-D2360.
Before Using the EPTZ function, you must configure the Installation Mode.
Once logged into the camera, you’ll see options at the top right to choose the Installation mode. Refer to the
image below:
The installation mode has 3 options:
o Wall Mount: Use this option when the camera has been installed onto a Wall Surface
o In-Ceiling: Use this option when the camera has been installed in the ceiling, and the camera
is facing down.
oGround: Use this option when the camera is mounted or laying on the ground, and the camera
is facing up.
11
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Set your desired display mode next. There are 4 options:
o 360° 1 Window: This shows the panoramic view of the camera in 1 window, and does not
offer EPTZ control.
o 180° 2 Window: This splits the image into 2 separate 180° field of vision views.
o 1 Window: This shows the dewarped view of the camera. You can click the EPTZ controls at
the top right to drive around the image virtually.
o 90° 4 Window: This splits the image into 4 separate 90° field of vision views. Each one of
these windows can be controlled independently by first clicking on the desired video frame,
and then by using the desired EPTZ controls at the top right.
12
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
13
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
Chapter
4
Appendix: Toxic or Hazard Materials
Report
Note
This user manual is intended for reference only. Slight differences may be found in the user interface as
products continually develop.
All designs and software herein are subject to change without prior written consent.
All trademarks and registered trademarks mentioned are the properties of their respective owners.
Please visit http://www.icrealtime.com for more information.
14
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.