IC Realtime ICIPD1300IR User Manual

HD IR Waterproof Network Dome Camera

User’s Manual

Version 4.3.0

i

Welcome

Thank you for purchasing our Network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

ii

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction)

Please note: Do not connect two power supplying sources to the device at the same time; it may
result in device damage!

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.

3．Installation

Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.

6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance
work.

iii

Accessory Name

Amount

Network Camera Unit

1

Quick Start Guide

1

Installation Accessories Bag

1
CD

1

Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
Dome enclosure is the optical component, do not touch the enclosure when you are installing the
device or clean the enclosure when you are doing maintenance work. Please use professional optical
clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result
in poor IR effect of camera with IR function.

7. Accessories

Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

iv

Table of Contents

1 General Introduction .............................................................................................................. 1

1.1 Overview ................................................................................................................... 1

1.2 Features ................................................................ .................................................... 1

1.3 Specifications ........................................................................................................... 2

2 Structure ................................................................................................................................. 4

2.1 Components ............................................................................................................. 4

2.2 Framework and Dimension ..................................................................................... 5

3 Device Installation ................................................................................................................. 6

3.1 Installation Steps ...................................................................................................... 6

4 Quick Configuration Tool ...................................................................................................... 8

4.1 Overview ................................................................................................................... 8

4.2 Operation .................................................................................................................. 8

5 Web Operation ..................................................................................................................... 10

5.1 Network Connection............................................................................................... 10

5.2 Login and Main Interface ....................................................................................... 10

6 FAQ ....................................................................................................................................... 12

Appendix Toxic or Hazardous Materials or Elements ............................................................. 13

1

User

Management

 Different user rights for each group, one user belongs to one group.
 The user right shall not exceed the group right.

Storage

Function

 Support central server backup function in accordance with your configuration

and setup in alarm or schedule setting

 Support record via Web and the recorded file are storage in the client-end

PC.

 Support network storage function such as FTP.

Network

Monitor

 Network camera supports one-channel video data transmit to network

terminal and then decode. Delaying time is within 270ms (network bandwidth
support needed)

 Max supports 20 connections.
 Adopt the following video transmission protocol: HTTP, TCP, UDP,

MULTICAST, RTP/RTCP, RTSP and etc.

 Support web access.

Network

Management

 Realize network camera configuration and management via Ethernet.
 Support device management via web or client-end.

Power

 External power adapter DC 12V.
 Support PoE.

Warning！
Do not connect these two power supplying sources to the device at the
same time; it may result in device damage!

Assistant

Function

 Log function
 Support system resource information and running status real-time display.
 Day/Night mode auto switch.
 Support picture parameter setup such as electronic shutter and gain setup.
 Support motion detect.
 Backlight compensation: screen auto split to realize backlight compensation

to adjust the bright.

 Support video watermark function to avoid vicious video modification.
 Built-in IR light. Support IR night vision.
 The enclosure conforms to the IP 66 protection. Has the waterproof function.

1 General Introduction

1.1 Overview

This series network camera integrates the traditional camera and network video technology. It adopts
video data collection, transmission together. It can connect to the network directly without any auxiliary
device.

This series network camera uses standard H.264 video compression technology, which maximally
guarantees the video quality.

It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The waterproof design conforms to the IP 66 level. It has the sound waterproof function suitable for
use in the outdoor environments.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
network camera is widely used in many environments such office, bank, road monitor and etc.

1.2 Features