IC Realtime ICIPB3000AF User Manual

HD IR Waterproof Fixed IP Camera With Integrated Bracket
User’s Manual
Version 3.3.0
Thank you for purchasing our IP camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
i
Important Safeguards and Warnings
1Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. This series product can not support these
two modes at the same time.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5Environment
This series IP camera should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
ii
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name Amount
IPC Unit 1
Quick Start Guide 1
12V to 24V Conversion Cable
(For AC 24V series product only)
Installation Accessories Bag 1
CD 1
1
iii
Table of Contents
1 General Introduction ..................................................................................................................1
1.1 Overview........................................................................................................................1
1.2 Features.........................................................................................................................1
1.3 Specifications................................................................................................................2
1.3.1 Performance...........................................................................................................2
1.3.2 Factory Default Setup...........................................................................................4
2 Structure ....................................................................................................................................11
2.1 Multiple-function Combination Cable ......................................................................11
2.2 Framework and Dimension.......................................................................................12
2.3 Bidirectional talk .........................................................................................................13
2.3.1 Device-end to PC-end ........................................................................................13
2.3.2 PC-end to the Device-end..................................................................................13
2.4 Alarm Setup.................................................................................................................13
3 Installation .................................................................................................................................15
3.1 Device Installation ......................................................................................................15
3.2 SD Card Installation ...................................................................................................15
3.3 Lens Adjustment.........................................................................................................16
3.4 Bracket Adjustment....................................................................................................17
4 Quick Configuration Tool.........................................................................................................18
4.1 Overview......................................................................................................................18
4.2 Operation .....................................................................................................................18
5 Web Operation..........................................................................................................................21
5.1 Network Connection...................................................................................................21
iv
5.2 Login and Logout........................................................................................................21
6 FAQ ............................................................................................................................................24
Appendix Toxic or Hazardous Materials or Elements ...............................................................25
v
1 General Introduction
1.1 Overview
This series IP camera integrates the traditional camera and network video technology. It adopts audio
and video data collection, transmission together. It can connect to the network directly without any
auxiliary device.
This series IPC uses standard H.264 video compression technology and G.711a audio compression
technology, which maximally guarantee the audio and video quality.
It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.
It supports real-time monitor and listening at the same time. It supports analog video output and dual-
way bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
IPC is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
Storage
Function
Alarm
Function
Network
Monitor
Network
Management
Power
Assistant
Function
z Different user rights for each group, one user belongs to one group. z The user right shall not exceed the group right.
z Support central server backup function in accordance with your configuration and
z Support record via Web and the recorded file are storage in the client-end PC. z Support built-in SD card. z Do not support local SD card hot swap storage function. Support short-time
z Support network storage function such as FTP. z Real-time respond to external on-off alarm input, and video detect as user pre-
z Real-time video detect: motion detect, camera masking. z IPC supports one-channel audio/video data transmit to network terminal and then
z Max supports 20 connections. z Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
z Support web access. z Realize IPC configuration and management via Ethernet. z Support device management via web or client-end.
z External power adapter DC12V/AC 24V. You can select according to your actual
z Log function z Support system resource information and running status real-time display. z Day/Night mode auto switch.
setup in alarm or schedule setting
storage when encounter disconnection.
defined activation setup and generate corresponding message in screen and audio prompt(allow user to pre-record audio file)
decode. Delay is within 270ms (network bandwidth support needed)
MULTICAST, RTP/RTCP, RTSP and etc.
environments. Please note system can not support these two types of power supplying at the same time.
1
z Built-in IR light. Support IR night vision. z Support picture parameter setup such as electronic shutter and gain setup. z Backlight compensation: screen auto split to realize backlight compensation to
adjust the bright.
z Support video watermark function to avoid vicious video modification. z The enclosure conforms to the IP 66 protection. Has the waterproof function.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for IPC performance specification.
Model Parameter
System
Video Parameter
Main Processor TI Davinci high performance DSP OS Embedded LINUX System
Resources User Interface Remote operation interface such as WEB, DSS, PSS
System Status SD card status, bit stream statistics, log, and software version. Image Sensor Pixel 2080(H)*1553(V) 1920(H)*1080(V) 1280(H)*960(V) 1280(H)*960(V) Day/Night Mode
Auto Aperture DC drive Gain Control Fixed/Auto
IPC-HFW3300C IPC-HFW3200C
Support real-time network, local record, and remote operation at the same time.
1/2.8-inch CMOS
Support day/night mode switch and IR-CUT at the same time. (The lens has built-in IR-CUT mechanical component.).
1/2.8-inch CMOS 1/3-inch CMOS 1/3-inch CMOS
IPC­HFW3100C
IPC­HFW3101C
White Balance Manual/Auto
BLC On/Off On/Off On/Off
Manual/Auto
Exposure Mode
Video Compression Standard
Video Frame Rate
PAL: It ranges from 1/3 to 1/10000 NTSC: It ranges from 1/4 to 1/10000
H.264/JPEG/MJPG
PAL: Main stream 3M@15fps,10 80P@25fps,SXG A@25fps,
1.3M@25fps 720P@25fps 704*576@25fps Extra stream
(704*576@25fp, 352*288@25fps)
PAL: Main stream 1080P@25fps, SXGA@25fps,
1.3M@25fps, 720P@25fps, 704*576@25fps ), Extra stream (704*576@25fps, 352*288@25fps)
PAL Main stream 1.3M@25f 720P@25fps 704*576@25fp s Extra stream (704*576@25fp
s 352*288@25f ps)
Off/BLC/WD Value:1­100
PAL Main stream 1.3M@25fps, 720P@25fps 704*576@25fp s Extra stream (704*576@25fp
s 352*288@25f ps)
2
NTSC: Main stream 3M@15fps ,10 80P@30fps, SXGA@30fps,
1.3M@30fps, 720P@30fps, 704*480@30fps ), Extra stream 704*480@30f ps,352*240@30f ps
H.264: 56Kbps-8192Kbps. JPEG is adjustable and bit rate is adjustable. Support customized setup. Support mirror. Support flip function.
Channel title, time title, motion detect, camera masking.
Φ14 interface. Lens is the default accessories 1-channel. RCA 1-channel. RCA
Reuse the first audio input channel
G.711a/G.711u/PCM
396 (18*22) detection zonessensitivity level ranges from 1 to 6 (The 6th level has the highest sensitivity) Activation event: alarm device, audio/video storage, image snapshot, log, email function and etc.
Audio
Video
Video Bit Rate
Video Flip Snapshot Max 1f/s snapshot. File extension name is JPEG.
Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast.
Video Information
Lens 3.3-12mm@F1.4 Lens Interface
Audio Input Audio Output
Bidirectional Talk Input
Audio Bit Rate 16kbps 16BIT Audio
Compression Standard
Motion Detect
NTSC: Main stream 1080P@30fps, SXGA@30fps,
1.3M@30fps, 720P@30fps, 704*480@30fps ),
Extra stream 704*480@30fp
s,352*240@30fps
NTSC: Main stream 1.3M@30fps, 720P@30fps, 704*480@30fp s Extra stream 704*480@30f ps,352*240@3 0fps
NTSC: Main stream 1.3M@30fps, 720P@30fps, 704*480@30fp s Extra stream 704*480@30 fps,352*240@3 0fps
2.8­12mm@F1.4
Alarm Input
Record and
Backup
Record Priority Manual>External alarm >Video detect>Schedule Local Storage Support Micro SD card storage
Storage Management
Network
Interfac
e
Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet Network Protocol
Remote Operation
AUX
Video Output Restore Default
Setup
2-channel input1-channel output
Support display local storage status
Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP, SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour, SNMP.
Monitor, PTZ control, system setup, file download, log information, maintenance , upgrade and etc.
1-channel analog video outputBNC port.
Reset button
3
Power
General Parameter
Power Consumption Working Temperature Working Humidify
Dimensions(mm) Weight Installation Bracket is included in the accessories bag.
Support AC24V/DC12V power. (Can not support these two modes at the same time.)
8W MAX (10W MAX when ICR switch)
-10~+60
10%~90%
φ104*306.7 1250gExcluding box
1.3.2 Factory Default Setup
Please refer to the following sheet for factory default setup information.
Default Setup
Setup Item
Conditions
Camera
Brightness 50
Contrast 50
Hue 50
Saturation 50
Gain Mode Auto
Gain Adjust 80
Exposure Mode Auto
Auto Iris On
Scene Mode Auto
Day/night Mode Auto
IPC­HFW3300C
IPC­HFW3200C
IPC­HFW3100C
IPC­HFW3101C
BLC Off Off Off WDR
Mirror Off
Flip Off
Video
Video bit stream
Main Stream
Bit stream type
Encode mode
Resolution
Frame Rate FPS
Bit Rate Type
Recommen ded Bit
Bit Rate 8192
I Frame 50
Watermark
General
H.264
1080P
1920*1080
PAL:25 NTSC:30
CBR
3584-8192 Kb/S
Enable
1080P
1920*1080
1.3M
1280*960
720P
1280*720
4
Loading...
+ 21 hidden pages