ICRealtime ICIP-360L4 User Manual
HD Fisheye Panorama Network Camera
Quick Start Guide
Version 1.0.0
i
Welcome
Thank you for purchasing our network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series
product!
Please keep this user’s manual well for future reference!
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
Please check if the power supply is correct before operating the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and
the Limited power source is rated 12V DC, DC5V or AC24V in the IEC60950-1. (Power
supply requirement is subject to the device label).
Please install easy-to-use device for power off before installing wiring, which is for
emergent power off when necessary.
Please prevent the line cord from being trampled or pressed, especially the plug, power
socket and the junction from the device.
Note: Do not connect these two power supplying sources to the device at the same
time; it may result in device damage!
We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted
repair.
2．Environment
Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus;
otherwise it may cause overexposure (It is not the device malfunction), which will affect
the longevity of CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and
temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely
cold and with strong electromagnetic radiation or unstable lighting.
Please do not allow water and other liquid falling into the camera in case that the internal
components are damaged.
Please do not allow rain or damp to the indoor device in case fire or lightning may occur.
Please keep the sound ventilation in case of heat accumulation.
Please pack the device with standard factory packaging or material with same quality
when transporting the device.
i
Heavy stress, violent vibration or water splash are not allowed during transportation,
storage and installation.
3. Operation and Daily Maintenance
Please do not touch the heat dissipation component of the device directly in order to
avoid scald.
Please do not dismantle the device; there is no component which can be fixed by users
themselves in the machine. It may cause water leakage or bad image for the device due
to unprofessional dismantling.
It is recommended to use the device with thunder proof device in order to improve
thunder proof effect.
The grounding holes of the product are recommended to be grounded to further enhance
the reliability of the camera.
Do not touch the CCD (CMOS) optic component directly. You can use the blower to
clean the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to
wipe away the dust gently if it is necessary to clean.
Always use the dry soft cloth to clean the device. If there is too much dust, please use
the water to dilute the mild detergent first and then use it to clean the device. Finally use
the dry cloth to clean the device. Don’t use volatile solvent like alcohol, benzene, thinner
and etc or strong detergent with abrasiveness, otherwise it will damage the surface
coating or reduce the working performance of the device.
Dome cover is an optical device, please don’t touch or wipe cover surface directly during
installation and use, please refer to the following methods to deal with once dirt is found:
Stained with dirt
Use oil-free soft brush or hair dries to remove it gently.
Stained with grease or fingerprint
Use soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton
cloth or paper soaked with alcohol or detergent to wipe from the lens center to outward. It
is ok to change the cloth and wipe several times if it is not clean enough.
Warning
Please use the standard accessories provided by manufacturer and make sure the
device is installed and fixed by professional engineers.
Please prevent the device surface from the radiation of laser beam when using laser
beam device.
Please do not provide two or more power supply modes for the device, otherwise it may
cause damage to the device.
Statement
ii
Please refer to the actual product for more details; the manual is just for reference.
Accessory Name
Amount
Network Camera
1
Quick Start Guide
1
Installation Accessories Bag
1
CD
1
The manual will be regularly upgraded according to the product update; the upgraded
content will be added in the manual without prior announcement.
Please contact the supplier or customer service if there is any problem occurred when
using the device.
Please contact the customer service for the latest procedure and supplementary
documentation.
There may be deviation between the actual value of some data and the value provided in
the manual due to the reasons such as the real environment is not stable and so on.
Please refer to the company’s final explanation if there is any doubt or dispute.
The company is not liable for any loss caused by the operation which is not followed by
the manual.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
iii
Table of Contents
1 Structure ................................................................................................................ 1
1.1 Device External Cables ......................................................................... 1
1.2 Dimensions .............................................................................................. 2
1.3 Bidirectional Talk .................................................................................... 3
1.3.1 Device-end to PC-end .................................................................... 3
1.3.2 PC-end to Device-end .................................................................... 3
1.4 Alarm Setup............................................................................................. 4
2 Installation ............................................................................................................. 5
2.1 Device Installation .................................................................................. 5
2.2 Micro SD Card Installation .................................................................... 6
3 Quick Configuration Tool .................................................................................... 8
3.1 Overview .................................................................................................. 8
3.2 Operation ................................................................................................. 8
4 Web Operation .................................................................................................... 10
4.1 Network Connection ............................................................................ 10
4.2 Login and Main Interface .................................................................... 10
4.3 Panorama Function on Web ............................................................... 11
1 Appendix Toxic or Hazardous Materials or Elements .................................. 12
iv
1
SN
Port
Port name
Connector
Function Description
1
LAN
Network port
Ethernet
port
Connect standard Ethernet cable.
2
POWER
Power input
port
-
Connect DC 12V power, input power.
3
AUDIO
OUT
Audio output
port
RCA
Output audio signal to speaker and other devices.
4
AUDIO IN
Audio input
port
RCA
Input audio signal, receive analog audio signal
from pick-up and other devices.
5
I/O
I/O port
-
Connect I/O port.
1 Structure
1.1 Device External Cables
Note: There is slight difference about appearance between the product models and the following
figures; please refer to Figure 1-1 or Figure 1-2 according to the actual products.
Figure 1- 1
Figure 1-2
Please see Sheet 1-1 for more details about external cable functions.
Sheet 1-1
Loading...