How it Works
IC Realtime
Loading...
Forensic
User Manual
136 pgs4.79 Mb0

IC Realtime Forensic User Manual

1
Forensic DVR User’s Manual
2
Table of Contents
1.1 Features.................................................................................................................. 10
1.2 Specifications......................................................................................................... 10
1.3 Special Features ................................................................................................... 12
2.1 Front Panel............................................................................................................. 15
2.2 Rear Panel ............................................................................................................. 15
2.3 Remote Control...................................................................................................... 16
2.4 Mouse Control .......................................................................................................17
2.5 Virtual Keyboard .................................................................................................... 18
3.1 Check Unpacked DVR.......................................................................................... 19
3.2 HDD Installation..................................................................................................... 19
3.2.1 Choose HDDs ................................................................................................. 19
3.2.2 Calculate HDD Size ....................................................................................... 19
3.2.3 HDD Installation.............................................................................................. 19
3.3 CD/DVD Burner Installation................................................................................. 20
3.4 Desktop and Rack Mounting ............................................................................... 20
3.4.1 Desktop Mounting .......................................................................................... 20
3.4.2 Rack Mounting................................................................................................ 20
3.5 Connecting Power Supply ................................................................................... 20
3.6 Connecting Video Input and Output Devices.................................................... 20
3.6.1 Connecting Video Input................................................................................. 20
3.6.2 Connecting Video Output.............................................................................. 21
3.7 Connecting Audio Input & Output, Bidirectional Audio, Looping Video ........ 21
3
3.7.1 Audio Input/One Audio Output ..................................................................... 21
3.7.2 Alarm Input and Relay Output...................................................................... 22
3.7.3 Alarm Input ...................................................................................................... 22
3.7.4 Alarm Output................................................................................................... 23
3.7.5 Alarm Input and Output Details.................................................................... 23
3.7.6 Relay Output Description .............................................................................. 25
3.8 RS232 ..................................................................................................................... 26
3.9 RS485 ..................................................................................................................... 27
3.10 Other Interfaces..................................................................................................... 27
4.1 Login, Logout & Main Menu................................................................................. 28
4.1.1 Login................................................................................................................. 28
4.1.2 Main Menu....................................................................................................... 28
4.1.3 Logout .............................................................................................................. 29
4.1.4 Auto Resume after Power Failure ............................................................... 29
4.1.5 Replace button battery .................................................................................. 29
4.2 Recording operation ............................................................................................. 29
4.2.1 Live Viewing .................................................................................................... 29
4.2.2 Manual Record ............................................................................................... 29
4.3 Search & Playback................................................................................................ 31
4.3.1 Search Menu................................................................................................... 31
4.3.2 Basic Operation .............................................................................................. 33
4.3.3 Backup in search interface ........................................................................... 35
4.3.4 Calendar .......................................................................................................... 35
4.4 Record setup (Schedule) ..................................................................................... 35
4.4.2 Basic Operation................................................................................................. 36
4.5 Motion Detect......................................................................................................... 37
4.5.1 Go to Detect Menu............................................................................................ 37
4.5.2 Motion Detect..................................................................................................... 37
4.5.3 Video Loss.......................................................................................................... 40
4.5.4 Camera Masking............................................................................................... 40
4.6 Alarm Setup and Alarm Activation...................................................................... 41
4.6.1 Go to alarm setup interface .......................................................................... 42
4.6.2 Alarm setup ..................................................................................................... 42
4.7 Real-time Backup and Burn................................................................................. 44
4
4.7.1 Real-time Backup........................................................................................... 44
4.7.2 Backup ............................................................................................................. 46
4.8 CD playback........................................................................................................... 49
4.9 PTZ Control and Color Setup.............................................................................. 50
4.9.1 Cable Connection........................................................................................... 50
4.10 PTZ Setup ..............................................................................................................51
4.11 Temperature/Humidity Overlay ........................................................................... 52
4.12 Color Setting .......................................................................................................... 52
5.1 Menu Tree .............................................................................................................. 54
5.2 Main Menu.............................................................................................................. 54
5.3 Setting ..................................................................................................................... 55
5.3.1 General ............................................................................................................ 55
5.3.2 Encode............................................................................................................. 57
5.3.3 Schedule.......................................................................................................... 58
5.3.4 RS232 .............................................................................................................. 58
5.3.5 Network............................................................................................................ 59
5.3.6 Alarm ................................................................................................................ 66
5.3.7 Detect............................................................................................................... 66
5.3.8 Pan/Tilt/Zoom.................................................................................................. 66
5.3.9 Display .............................................................................................................67
5.3.10 Default....................................................................................................... 68
5.4 Search..................................................................................................................... 69
5.5 Advanced................................................................................................................ 69
5.5.1 HDD Management .........................................................................................70
5.5.2 Abnormity......................................................................................................... 71
5.5.3 Alarm Output................................................................................................... 72
5.5.4 Manual Record ............................................................................................... 72
5.5.5 Account ............................................................................................................ 72
5.5.6 Auto Maintain .................................................................................................. 73
5.5.7 TV Adjust ......................................................................................................... 74
5.6 Information.............................................................................................................. 74
5.6.1 HDD Information............................................................................................. 74
5.6.2 BPS................................................................................................................... 75
5.6.3 Log.................................................................................................................... 75
5.6.4 Version............................................................................................................. 76
5.6.5 Online Users ...................................................................................................77
5
5.7 Backup .................................................................................................................... 77
5.8 Exit........................................................................................................................... 77
6.1 Go to Pan/Tilt/Zoom Menu................................................................................... 79
6.1.1 3D Intelligent Positioning Key ......................................................................79
6.2 Preset /Patrol / Pattern /Border Function ........................................................ 80
6.2.1 Preset Setup ................................................................................................... 81
6.2.2 Activate Preset................................................................................................ 81
6.2.3 Patrol Setup..................................................................................................... 81
6.2.4 Activate Patrol................................................................................................. 81
6.2.5 Pattern Setup .................................................................................................. 81
6.2.6 Activate Pattern Function.............................................................................. 82
6.2.7 Border Setup................................................................................................... 82
6.2.8 Activate Border Function............................................................................... 82
6.2.9 Flip ....................................................................................................................82
7.1 Network Connection.............................................................................................. 84
7.2 Login and logout.................................................................................................... 84
7.2.1 Real-time Monitor........................................................................................... 87
7.2.2 Burning............................................................................................................. 88
7.2.3 PTZ................................................................................................................... 89
7.2.4 Color ................................................................................................................. 92
7.2.5 Picture Path and Record Path...................................................................... 92
7.2.6 Menu Interface Switch................................................................................... 93
7.3 Configure ................................................................................................................ 94
7.3.1 System Information ........................................................................................ 94
7.3.2 Setting .............................................................................................................. 96
7.4 Search................................................................................................................... 115
7.4.1 Download....................................................................................................... 116
7.5 Alarm .....................................................................................................................117
7.6 About .....................................................................................................................117
7.7 Log out .................................................................................................................. 118
6
7.8 Un-install Web Control ....................................................................................... 118
8.1 Log in..................................................................................................................... 119
8.2 Enable Monitor..................................................................................................... 120
8.3 Add New Device.................................................................................................. 121
9.1 General Introduction ........................................................................................... 123
9.2 Play File ................................................................................................................ 124
9.3 Right Mouse Menu.............................................................................................. 124
9.3.1 Convert to AVI............................................................................................... 125
9.3.2 Parameter Setting ........................................................................................ 126
7
Welcome
Thank you for purchasing our DVR! This operating manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully!
8
Important Safeguard and Warnings
1．Electrical Safety
All installation and operation here should conform to local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
2．Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage and installation.
3．Installation
Keep upwards. Handle with care. Do not apply power to the DVR before completing installation. Do not drop objects on the DVR
4．Qualified Engineers Needed
All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.
6. Accessories
Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components listed below are included:
z One power cable z One Ethernet cable z A package of installation fittings z DVR user’s manual z One CD z Product warranty card z One mouse
Contact your local retailer ASAP if something is missing in your package.
9
10
1 Features and Specifications
1.1 Features
This series DVR has the following features:
z H.264 compression algorithm ideal for standalone DVR z Real-time live display up to 4 cameras, 100/120 fps recording for 4CIF z Pentaplex function: live, recording, playback, backup & remote access z 2 HDDs supported & CD-RW/DVD-RW supported z Video files are stored in the HDD and backed up by the burner simultaneously z Picture in picture live viewing as well as playback z CD-RW/DVD-RW automatically switch and CD/DVD change promotion z Forensic information input &display during playback and data encryption for police
use
z Multiple control methods: IR remote control, keyboard, USB mouse and network
keyboard.
z Smart video detection: motion detection, camera masking, video loss. z Smart camera settings: privacy masking, camera lock, color setting, and title display z Pan Tilt Zoom and Speed Dome Control: more than 60 protocols supported, preset,
scan, auto pan, auto tour, pattern, auxiliary function supported. And with Speed Dome, 3D intelligent positioning function supported.
z 2-channel audio input and bidirectional talk supported z Easy backup methods: USB devices, CD-RW/DVD-RW & network download z Alarm triggering screen tips, buzzer, PTZ preset, e-mail, FTP upload. z Smart HDDs Management: non-working HDD hibernation, HDD faulty alarm, Raid
function.
z Powerful network software: built-in web server, EPSS (Enterprise professional
surveillance software). Networking access for remote live viewing, recording, playback, setting, system status, event log, e-mail & ftp function.
1.2 Specifications
System
Main Processor High performance embedded microprocessor Operating System Embedded LINUX System Resources Pentaplex function: live, recording, playback, backup &
remote access User Interface GUI, on-screen menu tips. Control Device USB mouse, keyboard, IR remote
control, network keyboard,. Input Method Numeral/Character/Denotation System Status HDD status, data stream statistics, log record, BIOS
version, on-line user and etc. Peripheral device LTM8230C overlay temperature and humidity to current video
Video
11
Video Input 4-Channel composite video(NTSC/PAL) BNC（1.0VP-P ， 75
Ω）
Video Output 1-ch PAL/NTSC，BNC（1.0VP-P ， 75Ω） composite signal
1-ch VGA output
Video Standards PAL（625Line，50f/s），NTSC（525Line，60f/s）
Video Compression H.264 Video Resolution Format NTSC PAL D1(4CIF) 704*480 704 * 576 2CIF 704*240 704*240 CIF 352 *240 352 *288 QCIF 176*120 176*144 Video Recording PAL 1f/s~25f/s NTSC 1f/s~30f/s Video Display Split Full and multiple screen display, 1 / 4 PIP Tour Display Support Image Quality 1~6 level (level 6 is the best) Privacy Masking Self-defined four-sided zone for privacy masking for each
camera Camera Lock Camera locked for users Camera Adjustment Adjust color according to different time period Video Information Camera title, time, video loss, camera lock, motion detection,
recording TV Output Adjustment Adjust TV output color & display zone
Audio
Audio Input 2-channel input 200-1000mv 1KΩ(BNC)
Active pickup (active
Vpp=2V)
MIC audio input (Line in)
Audio Output 1-channel output, 200-2000mv 4Ω(BNC) Local speaker output/earphone output Audio Compression ADPCM
Video Detection & Alarm
Motion Detection PAL: 22X18/NTSC: 22X15 detection zones Sensitivity: 1~6 (level 6 is highest) Trigger recording, PTZ movement, tour, alarm, e-mail &
FTP
Video Loss Trigger recording, PTZ movement, tour, alarm, e-mail &
FTP
Camera masking Trigger recording, PTZ movement, tour, alarm, e-mail &
FTP Alarm Input 4-channel, programmable, ground, manual open/closed Trigger recording, PTZ movement, tour, alarm, e-mail &
FTP
12
Relay output 3-channel (including one controllable +12V), 30VDC, 2A,
125VAC, 1A (activation output)
Hard Disk
Hard Disk 2 SATA ports 2 HDDs supported.
Space Occupation Audio ：ADPCM28.8MB/H Video ：56～900MB/H
HDD Management Hard disk hibernation technology, HDD faulty alarm &
Raid (Redundancy)
Record, Playback & Backup
Recording Mode Manual, continuous, video detection (including motion
detection, camera masking, video loss), Alarm Recording Priority Manual >Alarm >Video Detection >Continuous. Recording Interval 1 to 120 minutes (default: 60 minutes) Overwrite Mode Support Raid Function Support Search Mode Time/Date, Alarm, Motion Detection & exact search
(accurate to second) Playback 2-channel playback simultaneously. PIP play, pause,
stop, rewind, fast play, slow play, next file, previous file,
next camera, previous camera, full screen, repeat, shuffle,
backup selection. Digital Zoom Selected zone can zoom into full screen during playback Backup Mode Flash disk/ USB HDD/ USB CD-RW/DVD-RW/ network
download
Network
Interface RJ-45 Port (10/100M) Network Functions TCP/IP, DHCP, DDNS, PPPoE, E-mail, FTP Remote operation Monitor, PTZ control, playback, system setting, file
download, log information
Auxiliary Interface
USB Interface 2 ports, 1 for mouse control, 1 for backup. RS232 Keyboard, PC communication RS485 PTZ control
Environmental
Power Supply 220V+10% 50Hz / 110V 60Hz Power Consumption 27W (excluding HDD)
Working Temperature 0℃~＋55℃
Working Humidity 10%~90% Atmosphere Pressure 86kpa~106kpa Dimension 370mmx290mmx132mm (W*D*H) Weight 6.5 KG Mounting Desktop or rack
1.3 Special Features
13
z Time information overlay, channel information overlay, temperature and humidity
information overlay Time information is on the top right corner by default. Channel information is on left down corner by default. Temperature and humidity information is on top left corner by default. Time information position and channel information position can be modified. Please note, before you overlaying temperature and humidity information, please go to pan/tilt zoom setup interface. Then set as: LTM8230C, baudrate: 9600, data bit: 7 and stop bit: 2. finally, input corresponding address.
z Good audio effect System adopts ADPCM compression algorithm. It can lower the noise and enhance definition
z Preview PIP Support PIP(picture in picture) function so that you can view the specified position in detail and at the same time observe the whole situation.
z Real-time backup System supports synchronization backup, alternative backup and circle backup. You can backup current monitor data to the specified DVD (one or several DVDs) and at the same time the specified channel can be memorized in PIP mode.
Synchronization backup: The specified device can burn the same data at the
same time.
Alternative backup: system support several burners to backup in turn. You can
insert the newt CD to continue backup once the current one is full. Please note to guarantee there is no data loss between these two CDs, please make sure current record function is normal.
Circle backup: This function is based on alternative backup. When the first CD
is full, burner pop up the CD and you can input a new one. Once the alternative backup is full, system goes back to the first CD to begin burning.
z Switch CD function When the CD free space reaches a threshold, system can alarm you. (You can specify a value here. Minimum value is 50M) After you insert the new CD, system reads the previous three to five minutes data to current CD and then start burning. Please note during the whole process, you need to make sure manual record is working properly and record is successfully.
z CD playback You can use this function to verify the real-time burning data or backup data. System supports CD playback only. Please note it is not in PIP mode. Playback only distinguished by channel.
z Title information
14
To burn the necessary case information, you can set case information via client-end and then send it to the DVR. System can display the title information first and then playback the data.
z PC playback The burned CD can playback in any PC (support PIP mode). System supports channel switch and watermark search. Please note you need to burn the CD player in current CD.
z Data encryption You need to input password to begin CD playback if you have input password when burning. System also support switch encryption data to current popular storage format such as
*.WMV、*.AVI、*.ASF、*.MPEG、*.MOV、*.RM so that you can edit the audio if
necessary.
15
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first.
2.1 Front Panel
Front panel is shown as in Figure 2-1.
Figure 2-1
1 Burner 2 LCD 3 input/output volume
USB port IN：audio talk input
OUT：earphone output
4 Burning indication light
Power indication light Burner/stop button Power button.
2.2 Rear Panel
This series DVR real panel is shown as in Figure 2-2.
1 2 3
4
1
16
Figure 2-2
1 Power button
Power socket Fan
2
AUDIO OUT
AUDIO IN
VEDIO OUT
VEDIO IN
3
Alarm-RS485 port
RS232 port
VGA port
USB port NET port（RJ45）
4 Pickup port
Four 12V power sockets
2.3 Remote Control
The remote control interface is shown as in Figure 2-3.
Figure 2-3
Serial Number Function
1 Remote switch 2 Multiple-window switch 3 0-9 number key
2 3 4
17
4 Record 5 Auxiliary key 6 Confirm /menu key 7 Cancel 8 Direction key 9 Forward 10 Previous 11 Back 12 Next 13 Slow play 14 Stop 15 Fast play 16 Play/Pause
2.4 Mouse Control
System pops up password input dialogue box if you have not logged in.
In real-time monitor mode, you can go to the main menu.
When you have selected one menu item, left click mouse to view menu
content.
Implement the control operation.
Modify checkbox or motion detection status.
Click combo box to pop up drop down list
Left click
mouse
In input box, you can select input methods. Left click the corresponding button
on the panel you can input numeral/English character (small/capitalized). Here
← stands for backspace button. ＿ stands for space button.
In English input mode: _stands for input a backspace icon and ← stands for
deleting the previous character.
In numeral input mode: _ stands for clear and ← stands for deleting the previous numeral.
When input special sign, you can click corresponding numeral in the front panel to input. For example, click numeral 1 you can input“/” , or you can click the numeral in the on-screen keyboard directly.
18
Implement special control operation such as double click one item in the file list
to playback the video.
Double left
click mouse
In multiple-window mode, double left click one channel to view in full-window.
Double left click current video again to go back to previous multiple-window
mode. In real-time monitor mode, pops up shortcut menu: one-window, four-window,
Pan/Tilt/Zoom, color setting, search, record, alarm input, alarm output, main menu. Among which, Pan/Tilt/Zoom and color setting applies for current selected channel. If you are in multiple-window mode, system automatically switches to the corresponding channel.
Right click
mouse
Exit current menu without saving the modification.
In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
Press
middle
button
Page up or page down
Move mouse Select current control or move control
Select motion detection zone Drag mouse
Select privacy mask zone.
2.5 Virtual Keyboard
The system supports two input methods: numeral input and English character (small and capitalized) input. Move the cursor to the text column, the text is shown as blue, input button pops up on the right. Click that button to switch between numeral input and English input
(capitalized and small), Use > or < to shift between small character and capitalized character.
19
3 Installation and Connections
Note: All the installation and operations here should conform to your local electric safety code.
3.1 Check Unpacked DVR
When you receive the DVR from the shipping agency, please check whether there is any visible damage to the DVR appearance. The protective materials used for the package of the DVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list on the warranty card. Finally you can remove the protective film of the DVR.
3.2 HDD Installation
3.2.1 Choose HDDs
We recommend Seagate HDD of 7200rpm or higher.
3.2.2 Calculate HDD Size
This series have no limit to HDD capacity. You can use 120G-750G HDD to guarantee higher stability. The formula of total HDD size is: Total Capacity (MB) = Camera Amount * Recording Hours * HDD Usage Per Hour (M/h) H.264 compression is ideal for standalone DVRs. It can save more than 30% HDD capacity than MPEG4. When you calculate the total HD capacity, you should estimate the average HDD capacity per hour for each channel. For example, for a 4-ch DVR, the average capacity of HDD usage per hour per channel is 200M/h. Now if you hope the DVR can record the video 12 hours each day for 30 days, the total capacity of HDDs needed is: 4 channels * 30 days * 12 hours * 200 M/h = 288G. So you need to install one 300G HDD or 2*160G HDDs.
3.2.3 HDD Installation
Data ribbons, fastening screws and smart HDD shelf design are already provided in the accessories.
1. Fix the HDD on the bracket. 2. Connet power and data cable.
20
3. Fix the HDD bracket on the top. 4.Fix the bracket on the side.
After HDD installation, please check data ribbon connection and power cord.
3.3 CD/DVD Burner Installation
For built-in burner, you can dismantle front plate to install CD burner. This built-in burner should be set as MASTER. For USB burners, you need to install USB series burner. This series DVR is compatible with various burner brands popular in today’s market. You can consult our local technical support or visit our website for more information.
3.4 Desktop and Rack Mounting
3.4.1 Desktop Mounting
To prevent surface damage, please make sure that the rubber feet are securely installed on the four corners of the bottom of the unit. Position the unit to allow for cable and power cord clearance at the rear of the unit. Be sure that the air flow around the unit is not obstructed.
3.4.2 Rack Mounting
The DVR occupies two rack units of vertical rack space. The hardware necessary to mount the DVR into a rack is supplied with the unit. Install the cabinet in ventilated place. Avoid extreme heat, humid or dusty conditions. You can use a soft dry brush to clean opening outlet, cooling fan and etc regularly.
3.5 Connecting Power Supply
Please check input voltage and device power button match or not. We recommend you use UPS to guarantee steady operation, DVR life span, and other peripheral equipments operation such as cameras.
3.6 Connecting Video Input and Output Devices
3.6.1 Connecting Video Input
The DVR automatically detects the video standard (PAL or NTSC) whenever you connect a video input. It accepts both color and black-and-white and analog video. NOTE: z Enabling line lock on cameras may cause video distortion. There may be noise in the
camera’s power source. If video from one or more cameras is distorted, we
recommend you disable line lock on the camera as your first troubleshooting step. z If a video distribution amplifier is installed between the video source and the DVR,
do not set the output video level above 1 Vp-p. To connect each video input:
1. Connect a coaxial cable to the camera or other analog video source.
2. Connect the coaxial cable to the video in connector on the rear panel. Please refer to
Figure 3-1 for more information.
NOTE:
21
You need to use a BNC installation tool to connect coaxial cables to the rear panel.
Figure 3-1
3.6.2 Connecting Video Output
This section provides information about physically connecting video display devices to the DVR. See Figure 3-2. If you connect the DVR with a TV monitor or VGA monitor, the DVR can automatically detects the monitor type. And without any output device, by default, the DVR is configured to use a TV monitor. In this case, if your application requires a VGA monitor,
you have to press the button “FN” or Shift on the front panel.
NOTE:
Video output 1 and VGA can’t display at the same time. But Video output 2 can display
properly with Video Output 1 or VGA.
Figure 3-2
3.7 Connecting Audio Input & Output, Bidirectional Audio, Looping Video
3.7.1 Audio Input/One Audio Output
Audio input, bidirectional audio input and audio output
22
The DVR encodes audio and video signals simultaneously, which lets you control audio at the monitored location. To set up audio:
1. Make sure your audio input device matches the RCA input level. If the device and RCA input levels do not match, audio distortion problems may occur.
2. Make sure the audio connector is wired as follows:
3. Connect a line input device or pre-amplified microphone to the audio connector for the video channel on the rear panel. Please refer to Figure 3-3.
Note:
The first and then second audio channel is open by default. You can only enable or disable the third or the fourth channel.
Figure 3-3
3.7.2 Alarm Input and Relay Output
The DVR offers 4 alarm inputs for external signaling devices, such as door contacts or motion detectors. Each alarm input can be either normally open or normally closed. Once configured, an alarm input can invoke many different activities, including triggering a relay device, sending an alert to a security office or storing pre-alarm video to the DVR.
3.7.3 Alarm Input
You should check your alarm input mode is grounding alarm input or not. For this series DVR, grounding signal is needed for alarm input. If you need to connect two units or one DVR and other device, please use a relay to separate them. Please refer to
Figure 3-4 for more information.
23
Figure 3-4
3.7.4 Alarm Output
Do not connect alarm output port directly with high power load (no more than 1 A) in case of heavy current. You can use the co-contactor to realize the connection between the alarm output port and the load. Please refer to Figure 3-5 for more information.
Figure 3-5
3.7.5 Alarm Input and Output Details
Please note this series product adopts ground alarm: When alarm circuit connects
to ground you can activate an alarm.
Alarm input and alarm output description ：
a) In alarm 1, from the left to the right are alarm1 to alarm 4 respectively. The
alarm becomes activated in low voltage.
b) In alarm1, 1-No c is normal open activation output. In alarm 2, 2-NO C NC is a
group of normal close activation output.
c) +12V is external alarm input. Here needs an external device to provide +12V
power. The alarm device power shall be less than 1A,
d) A.B is A/B cable to control 485 device. You can connect to control decoder and
24
etc. You need to use a 120Ohm resistance between A/B cable if there are too
many PTZ decoder.
e) “ ”：ground cable；
You can refer to the following sheet and Figure 3-6 for alarm input and output information.
Parameter Grounding Alarm
Ground Ground line
Alarm Input 1, 2, …,4
Relay Output 1,2,3,4: NO and C(Normally Open and Com)
5: NO,C and NC(Normally Open, Com, Normally Closed)
6: Ctrl 12V(This is used for reset the senor)
485 A、B
485 communication port. They are used to control devices such as PTZ.
+12（C）
This should input an external power input.
z 4-ch grounding alarm inputs. (Normal open or Normal close type) z Please parallel connect COM end and GND end of the alarm detector (Provide
external power to the alarm detector).
z Please parallel connect the Ground of the DVR and the ground of the alarm detector. z Please connect the NC port of the alarm sensor to the DVR alarm input(ALARM) z If you need to reset the touched-off alarm remotely, you can use DVR to supply
controllable 12 V power to the alarm detector such as the smoke detector. z Use the same ground with that of DVR if you use external power to the alarm device.
25
Figure 3-6
3.7.6 Relay Output Description
z 3 ways relay alarm output. Provide external power to external alarm device. z To avoid over loading, please read the following relay parameters sheet carefully.
(See below table) z The controllable +12v can be used to restore the smoke detector. Please refer to Figure 3-7 for alarm input module information.
Figure 3-7
Please refer to Figure 3-8 for alarm output module information.
26
Figure 3-8
Relay Specification
Model:
JRC-27F
Material of the touch
Silver
Rated switch capacity 30VDC 2A, 125VAC 1A Maximum switch power 125VA 160W Maximum switch voltage 250VAC, 220VDC
Rating （resistance load）
Maximum switch currency 1A between touches with
same polarity
1000VAC 1minute
between touches with different polarity
1000VAC 1minute
Insulation
between touch and winding 1000VAC 1minute
Surge voltage
between touches with same polarity
1500V (10×160us)
Length of open time
3ms max
Length of close time
3ms max
Mechanical 50×106 times (3Hz)
Longevity
Electrical 200×103 times (0.5Hz)
Temperature -40℃ ~+70℃
3.8 RS232
You can connect the DVR with POS or Keyboard through RS232. With POS system, the DVR can communicate through RS232 and network. For the POS system, the DVR can integrate the text content and even search the record through the info. The series DVR also support NKB operation. You can operate the DVR from the keyboard controls instead of using the control pad on the front panel of the unit. To connect a NKB keyboard to the DVR:
1. Assemble the KBD keyboard according to the instructions in its accompanying installation manual.
27
2. Connect the KBD keyboard into one of the RS232 ports on the DVR or through network.
3.9 RS485
When the DVR receives a camera control command, it transmits that command up the coaxial cable to the PTZ device. RS485 is a single-direction protocol; the PTZ device
can’t return any data to the unit. To enable the operation, connect the PTZ device to the
RS485(A,B) input on the DVR. Since RS485 is disabled by default for each camera, you need to enable the PTZ settings first. This series DVRs support multiple protocols such as Pelco-D, Pelco-P. To connect PTZ devices to the DVR:
1. Connect RS485 A,B on the DVR rear panel.
2. Connect the other end of the cable to the proper pins in the connector on the camera.
3. Follow the instructions for configuring a camera to enable each PTZ device on the DVR.
3.10 Other Interfaces
There are still other interfaces on the DVR, such as USB ports. You can refer to the Figure 3-9 for more information.
Figure 3-9
28
4 Overview of Navigation and Controls
Before operation, please make sure you have properly installed HDD and all the cable connections are right.
4.1 Login, Logout & Main Menu
4.1.1 Login
When system boots up, default video output is in multiple-window mode. Click Enter or left click mouse, you can see the login interface. See Figure 4-1. System consists of four accounts:
z Username: admin. Password: admin. z Username: 888888. Password: 888888 z Username: 666666. Password: 666666(Lower user who can only monitor,
playback, backup and etc.) z Username: default. Password: default(hidden user) For security reasons, please modify you password after first login.
Please use remote control to input. Click to switch between numeral, English
character (small/capitalized) and denotation.
Note:
Three times login failure in 30 minutes will result in system alarm and five times login
failure will result in account lock!
Figure 4-1
4.1.2 Main Menu
After you logged in, the system main menu is shown as below. See Figure 4-2. There are total six icons: search, information, setting, backup, advanced and shutdown. Move the cursor to highlight the icon, then double click mouse to enter the next menu.
29
Figure 4-2
4.1.3 Logout
In the main window, click shutdown button, you can see an interface is shown as below. See Figure 4-3.
Figure 4-3
There are several options for you. See
Figure 4-4.
Figure 4-4
Or you can click power button in the front panel for at least three seconds, system will stop all operations. Then you can click the power button in the real panel to turn off the DVR.
4.1.4 Auto Resume after Power Failure
When DVR is in recording, schedule recording or alarm recording mode, system can auto backup video and resume previous working status after power failure.
4.1.5 Replace button battery
Please always use the same type battery and check system time regularly. We recommend replace battery regularly (such as one-year) to guarantee system time accuracy.
4.2 Recording operation
4.2.1 Live Viewing
When you login, system is in preview mode。 You can see system date, time and channel name. You can go to general setup to modify these settings (Main Menu->Setting->General). Please refer to the following sheet for channel information.
1
Recording status 3
Video loss occurred
2
Motion detection status
4
Monitor lock status
Please refer to the following sheet for channel status. stands for opening switch
function, stands for closing switch function.
4.2.2 Manual Record
You need to have proper right to implement the following operation.
30
4.2.2.1 Go to manual record interface There are two ways for you to go to manual record interface.
z In the main menu, Advanced->Manual Record. z In preview mode, click record button in the front panel or record button in the remote
control. Manual record interface is shown as in Figure 4-5.
4.2.2.2 Basic operation Here is for you to set manual record setup. There are three statuses: schedule/manual/stop. Highlighted icon“○” to select corresponding channel. z Manual: the highest priority. After manual setup, all selected channels will begin
ordinary recording. z Schedule: channel records as you have set in recording setup (Main Menu-
>Setting->Scheduled) z Stop: all channels stop recording. Note: These three recording types have the following priority: Manual>Schedule>Stop.
Figure 4-5
4.2.2.3 Enable/disable record
Please check current channel status: “○” means it is not in recording status,
“●” means it is in recording status.
Then use direction key to highlight channel number.
4.2.2.4 Enable all channel recording Highlight ○ below All, you can enable all channel recording. See Figure 4-6. z All channel schedule record Please highlight “ALL” after “Schedule”. When system in schedule recording, all channels will records as you have previous set (Main menu->Setting->Schedule). The corresponding indication light in front panel will turn on.
Loading...
+ 106 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use