ICRealtime AVS-4MD5110-VIR-DP, AVS-4MD5110-VIR User Manual

HDAVS Camera User’s Manual

Version 1.0.0

i

Table of Contents

1 General Introduction .................................................................................................................. 1

1.1 Overview ........................................................................................................................ 1

1.2 Features ......................................................................................................................... 1

2 Device Framework ..................................................................................................................... 2

3 Installation.................................................................................................................................... 3

4 Menu ............................................................................................................................................. 5

4.1 HAVRSettings ............................................................................................................... 5

4.2 Menu Operation ............................................................................................................ 5

Appendix Ⅰ Maintenance ................................................................................................................... 7

ii

Welcome

Thank you for purchasing our HDAVS camera!
This user’s manual is designed to be a referenc e t ool for your system.
Please read the following saf eguard and warnings carefully before you use this series product!
Please keep this user’s m anual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

• All installation and operat i on her e s hould conform to your local e lect r i c al safety codes.

• The power shall conform to t he r equirement in the SELV (Safety Extra Low Voltage) and the

Limited power source is ra ted DC 12V or AC24V in the IEC60950-1. (Power supply requirement is
subject to the device label) .

• Please install easy-to-use device for pow er off before installing wiring, which is for emergent pow er
off when necessary.

• Please check if the power supply meets the require me nt s of working voltage of the cam er a before
operating the device (The material and length of the power supply cable will influence terminal
voltage value).

• Please prevent the line cor d from being trampled or presse d, es pecially the plug, power socket and
the junction from the device.

2．Environment

• Please don’t aim the devic e at strong light (such as lighting, sunlight and so on) to focus.

• Please transport, use an d st or e t he device within the range of allowed humidity and temperature.

• Please do not allow water and other liquid falling into t he cam er a in case that the internal

components are damaged.

• Please keep the sound ventilation in case of heat ac cumulation.

• Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

• Please pack the device wit h standard factory packaging or m at er ia l w ith s ame quality when
transporting the device.

• It is recommended to use the device together with lightni ng pr ot ection device to enhance lightning
protection effect.

• It is recommended to GND the dev ice to enhance device reliab ilit y.

• It is advised to use qualified v ideo tr ansmission cable to improv e video quality. It is recom me nded

to use RG59 coaxial cable or higher standard.

Warning

• Please use the standard accessories provided by manufacturer and mak e sure the device is
installed and fixed by prof es si onal engineers.

• Please prevent the device sur face from the radiation of laser beam when using laser be am device.

iii

• Please do not provide two or more power supply modes for the device, otherwise it may cause
damage to the device.

Statement

• Please refer to the actual pr oduct for more details; the manual is just for reference.

• The manual will be regularly upgraded according t o the product update; the upgraded content will

be added in the manual without pr ior announcement.

• Please contact the customer service for the latest procedure and supple m entary documentation.

• The company is not liable for any loss caused by the operation which is not followed by the manual.

• Please refer to the compa ny’s final explanation if there is any doubt or dispute.