How it Works
ICRealtime
Loading...
AVR-1604
Specsheet
3 pgs241.57 Kb0
User Manual
245 pgs7.17 Mb0

ICRealtime AVR-1604, AVR-1608, AVR-1616 User Manual

HD-AVS Standalone DVR User’s Manual
V1.3.0
i
1 FEATURES AND SPECIFICATIONS ................................ ....................... 1
1.1 Overview ............................................................................................................................. 1
1.2 Features .............................................................................................................................. 1
1.3 Specifications ..................................................................................................................... 2
1.3.1 EDGE4T/EDGE8T/EDGE16T ....................................................................................... 2
1.3.2 AVR-1408/AVR-1416 .................................................................................................... 4
1.3.3 MAX504DT/MAX508DT/MAX516DT ........................................................................... 5
1.3.4 AVR-1604/AVR-1608/ AVR-1616 ................................................................................. 7
1.3.5 FLEX4ET/FLEX8ET/FLEX16ET ................................................................................... 8
2 OVERVIEW AND CONTROLS ............................................................... 10
2.1 Front Panel ....................................................................................................................... 10
2.2 Rear Panel ........................................................................................................................ 10
2.2.1 EDGE4T/EDGE8T/EDGE16T ..................................................................................... 10
2.2.2 AVR-1408/AVR-1416 .................................................................................................. 12
2.2.3 MAX504DT/MAX508DT/MAX516DT/ AVR-1604/AVR-1608/ AVR-1616 ................ 14
2.2.4 FLEX4ET/FLEX8ET/FLEX16ET ................................................................................. 17
2.3 Remote Control ................................................................................................................ 20
2.4 Mouse Control .................................................................................................................. 22
2.5 Virtual Keyboard & Front Panel....................................................................................... 23
2.5.1 Virtual Keyboard .......................................................................................................... 23
2.5.2 Front Panel ................................................................................................................... 23
3 INSTALLATION AND CONNECTIONS .................................................. 25
ii
3.1 Check Unpacked DVR ..................................................................................................... 25
3.2 About Front Panel and Rear Panel ................................................................................. 25
3.3 HDD Installation ............................................................................................................... 25
3.3.1 EDGE4T/EDGE8T/ EDGE16T/AVR-1408/ AVR-1416 ............................................. 25
3.3.2 MAX504DT/MAX508DT/MAX516DT/ AVR-1604/AVR-1608/ AVR-1616 ................ 26
3.3.3 FLEX4ET/FLEX8ET/FLEX16ET ................................................................................. 26
3.4 Connecting Power Supply ............................................................................................... 27
3.5 Connecting Video Input and Output Devices ................................................................. 27
3.5.1 Connecting Video Input ............................................................................................... 27
3.5.2 Connecting Video Output ................................................................ ............................ 28
3.6 Connecting Audio Input & Output, Bidirectional Audio .................................................. 28
3.6.1 Audio Input ................................................................................................................... 28
3.6.2 Audio Output ................................................................................................................ 28
3.7 Alarm Input and Output Connection ............................................................................... 28
3.7.1 Alarm Input and Output Details .................................................................................. 29
3.7.2 Alarm Input Port ........................................................................................................... 30
3.7.3 Alarm Output Port ........................................................................................................ 31
3.8 RS485 ............................................................................................................................... 32
3.9 Other Interfaces ................................................................................................................ 32
4 OVERVIEW OF NAVIGATION AND CONTROLS .................................. 33
4.1 Boot up and Shutdown ................................ .................................................................... 33
4.1.1 Boot up ......................................................................................................................... 33
4.1.2 Shutdown ..................................................................................................................... 33
4.1.3 Auto Resume after Power Failure .............................................................................. 33
4.1.4 Replace Button Battery ............................................................................................... 33
iii
4.2 Startup Wizard .................................................................................................................. 34
4.3 Manual Record ................................................................................................................. 37
4.3.1 Live Viewing ................................................................................................................. 37
4.4 Right-Click Menu .............................................................................................................. 39
4.4.1 Window Switch ............................................................................................................. 40
4.4.2 PTZ Control .................................................................................................................. 40
4.4.3 Color ............................................................................................................................. 46
4.4.4 Search ................................................................................................ .......................... 48
4.4.5 Record Control ............................................................................................................. 48
4.4.6 Alarm Output ................................................................................................................ 48
4.4.7 Remote Device ................................................................ ............................................ 48
4.5 Navigation Bar .................................................................................................................. 48
4.5.1 Main Menu.................................................................................................................... 48
4.5.2 Output Screen .............................................................................................................. 48
4.5.3 Favorites ....................................................................................................................... 48
4.5.4 Tour .............................................................................................................................. 49
4.5.5 PTZ ............................................................................................................................... 49
4.5.6 Color ............................................................................................................................. 49
4.5.7 Search ................................................................................................ .......................... 49
4.5.8 Alarm Status ................................................................................................................. 49
4.5.9 Channel Info ................................................................ ................................................. 49
4.5.10 Remote Device ................................ ........................................................................ 50
4.5.11 Network .................................................................................................................... 50
4.5.12 HDD Manager.......................................................................................................... 50
4.5.13 USB Manager .......................................................................................................... 50
4.6 USB Device Auto Pop-up ................................................................................................ 50
4.7 Main Menu ........................................................................................................................ 51
4.8 Operation .......................................................................................................................... 51
4.8.1 Search ................................................................................................ .......................... 51
4.8.2 Backup .......................................................................................................................... 59
4.8.3 Shut Down .................................................................................................................... 61
iv
4.9 Information ........................................................................................................................ 61
4.9.1 System Info .................................................................................................................. 61
4.9.2 Event............................................................................................................................. 65
4.9.3 Network ........................................................................................................................ 66
4.9.4 Log ................................................................................................................................ 68
4.10 Setting ............................................................................................................................... 70
4.10.1 Camera .................................................................................................................... 70
4.10.2 Network .................................................................................................................... 80
4.10.3 Event ........................................................................................................................ 98
4.10.4 Storage .................................................................................................................. 112
4.10.5 System ................................................................................................................... 125
5 WEB OPERATION ............................................................................... 146
5.1 Network Connection ....................................................................................................... 146
5.2 Login................................................................................................................................ 146
5.3 LAN Mode ....................................................................................................................... 147
5.4 Real-time Monitor ........................................................................................................... 149
5.5 PTZ ................................................................................................................................ .. 150
5.6 Image/Relay-out ................................ ............................................................................. 151
5.6.1 Image .......................................................................................................................... 151
5.6.2 Relay output ............................................................................................................... 151
5.7 WAN Login ...................................................................................................................... 152
5.8 Setup ............................................................................................................................... 153
5.8.1 Camera ....................................................................................................................... 153
5.8.2 Network ...................................................................................................................... 160
5.8.3 Event........................................................................................................................... 176
v
5.8.4 Storage ................................................................ ....................................................... 184
5.8.5 Setting ........................................................................................................................ 188
5.9 Information ...................................................................................................................... 202
5.9.1 Version ....................................................................................................................... 202
5.9.2 Log .............................................................................................................................. 202
5.9.3 Online User ................................................................................................................ 203
5.10 Playback ......................................................................................................................... 204
5.11 Alarm ............................................................................................................................... 207
5.12 Log out ............................................................................................................................ 208
5.13 Un-install Web Control ................................................................................................... 209
6 PROFESSIONAL SURVEILLANCE SYSTEM ...................................... 210
7 FAQ ................................................................................................ ...... 211
APPENDIX A HDD CAPACITY CALCULATION ....................................... 219
APPENDIX B COMPATIBLE BACKUP DEVICES ....................................... 221
Appendix B-1 Compatible USB list .......................................................................................... 221
Appendix B-2 Compatible SD Card list ................................................................................... 222
Appendix B-3 Compatible Portable HDD list .......................................................................... 222
Appendix B-4 Compatible USB DVD List ............................................................................... 222
vi
Appendix B-5 Compatible SATA DVD List .............................................................................. 222
Appendix B-6 Compatible SATA HDD List ............................................................................. 223
APPENDIX C COMPATIBLE CD/DVD BURNER LIST ............................. 227
APPENDIX D COMPATIBLE DISPLAYER LIST ....................................... 228
APPENDIX E COMPATIBLE SWITCHER ................................ ................... 229
APPENDIX F COMPATIBLE WIRELESS MOUSE LIST ........................... 230
APPENDIX G EARTHING ......................................................................... 231
vii
Welcome
Thank you for purchasing our HD-AVS DVR! This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series standalone DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully!
viii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
3．Installation
Keep upwards. Handle with care. Do not apply power to the DVR before completing installation. Do not place objects on the DVR.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.
6. Accessories
Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery Improper battery use may result in fire, explosion, or personal injury! When replace the battery, please make sure you are using the same model!
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
CAUTION FOR YOUR OWN SAFETY, PLEASE CHANGE SYSTEM DEFAULT PASSWORD AFTER YOU FIRST LOGIN!
1
1 FEATURES AND SPECIFICATIONS
1.1 Overview
The hybrid standalone series DVR is an excellent digital monitor product designed for security field.
It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality, low bit stream. Unique frame by frame play function is suitable for detailed analysis. It has various functions such as record, playback, monitor at the same time and can guarantee audio video synchronization. This series product has advanced technology and strong network data transmission function.
This series device adopts embedded design to achieve high security and reliability. It can work in the local end, and at the same time, when connecting it to the professional surveillance software (PSS), it can connect to the security network to realize strong network and remote monitor function.
This series product can be widely used in various areas such as banking, telecommunication, electric power, interrogation, transportation, intelligent resident zone, factory, warehouse, resources, and water conservancy.
1.2 Features
This series product has the following features:
Real-time surveillance Support VGA port and HDMI port. Realize the surveillance through displayer. Support HDMI, VGA, and TV output at the same time.
Storage function Special data format to guarantee data security and can remove the risk of the vicious data modification. Support digital watermark.
Compression format Support multiple-channel audio and video. An independent hardware decodes the audio and video signal from each channel to maintain video and audio synchronization.
Backup function Support backup operation via USB port (such as U disk, portable HDD, burner) Client-end user can download the file to local HDD to backup via network.
Record & playback function
2
Model
Parameters
EDGE4T
EDGE8T
EDGE16T
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P(1-15fps)/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
HD-AVS：1～15f/s（The 1st channel supports 25/30f/s） CVBS：1~25f/s（PAL）； 1~30f/s（NTSC）
Support each channel real-time record independently, and at the same time it can support search, forward play, network monitor, record search, download and etc. Support various playback modes: slow play, fast play, backward play and frame by frame play. Support time title overlay so that you can view event accurate occurred time Support customized zoom function during the preview.
Network operation Support network remote real-time monitor, remote record search and remote PTZ control.
Alarm activation function Several relay alarm outputs to realize alarm activation and on-site light control. The alarm input port and output has the protection circuit to guarantee device safety.
Communication port RS485 port can realize alarm input and PTZ control. RS232 port can connect to keyboard to realize central control, and can also connect to PC COM to upgrade system and realize maintenance, and matrix control. Standard Ethernet port can realize network access function. The dual-network port has the multiple-access, fault-tolerance, load-balance setup mode.
PTZ control Support PTZ decoder via RS485.
Intelligent operation Mouse operation function In the menu, support copy and paste setup function
UPNP (Universal Plug and Play) Establish mapping connection between LAN and WAN via UPNP protocol.
Slight function differences may be found due to different series.
1.3 Specifications
1.3.1 EDGE4T/EDGE8T/EDGE16T
3
Model
Parameters
EDGE4T
EDGE8T
EDGE16T
Video Bit Rate
1024Kbps-4096Kbps， For 720P:default value is 1Mbps，max value is 4Mbps For 960H:default value is 1Mbps，max value is 3Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Max 2 IPC connections（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，RCA port,
Audio Output
1-ch，RCA port
Bidirectional Talk Input
Support（Reuse the audio port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
8-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
3-ch alarm output
HDD
HDD Port
2 SATA ports. Does not support eSATA port.
Space/HDD
4T
Communication Port
Network
1 RJ45 port, 100Mbps Ethernet port
Communication
RS485 port
USB
2 USB ports
Other
Power
DC12V/4A
Power Consumption
≤30W（No HDD）
Working Temperature
-10℃－＋55℃
4
Model
Parameters
EDGE4T
EDGE8T
EDGE16T
Working Humidity
10%~90%
Dimension
1U case，375mm（W）×280mm（D）×50mm（H）
Weight
1.5-2.5kg（no HDD）
Installation Mode
Desk installation
Model
Parameters
AVR-1408
AVR-1416
System Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
1080P(1-15fps) /720P/960H/D1/HD1/2CIF/CIF/QCIF
Video Frame Rate
HD-AVS：1~25f/s（PAL）； 1~30f/s（NTSC） CVBS：1~25f/s（PAL）； 1~30f/s（NTSC）
Video Bit Rate
2048Kbps-4096Kbps For 1080P/720P:default value is 2Mbps，max value is 4Mbps For 960H:default value is 1Mbps，max value is 3Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
8-ch, BNC port
16-ch, BNC port
Network Video Input
Max 2 IPC connections（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port Audio Input
4-ch，RCA port, audio via coaxial cable
Audio Output
1-ch，RCA port
1.3.2 AVR-1408/AVR-1416
5
Model
Parameters
AVR-1408
AVR-1416
Bidirectional Talk Input
Support（Reuse the audio port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm Alarm Input
8-ch alarm input
16-ch alarm input
Alarm Output
3-ch alarm output
HDD HDD Port
2 SATA ports. Does not support eSATA port.
Space/HDD
4T
Communication Port
Network
1 RJ45 port, 100Mbps Ethernet port
Communication
RS485 port
USB
2 USB ports
Other
Power
DC12V/4A
Power Consumption
≤30W（No HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
1U case，375mm（W）×280mm（D）×50mm（H）
Weight
1.5-2.5kg（No HDD）
Installation Mode
Desk installation
Model
Parameters
MAX504DT
MAX508DT
MAX516DT
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
HD-AVS：1～15f/s（The 1st channel supports 25/30f/s） CVBS：1~25f/s（PAL）； 1~30f/s（NTSC）
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
1.3.3 MAX504DT/MAX508DT/MAX516DT
6
Model
Parameters
MAX504DT
MAX508DT
MAX516DT
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， 1-ch TV output, HDMI/ VGA/TV video output at the same time (VGA/HDMI/TV of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，BNC port, audio via coaxial cable
Audio Output
1-ch，BNC port
Bidirectional Talk Input
Support（Independent bidirectional talk port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
8-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
6-ch alarm output
HDD
HDD Port
4 SATA ports. Does not support eSATA port
Space/HDD
6T
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
Communication
1 RS232 port, 1 RS422 port, 1 RS485 port
USB
3 USB ports (One at the front panel and two at the rear panel)
Other
Power
AC90~264V 50+2% Hz (4/8-ch max 75W)
Power Consumption
≤35W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
1.5U case，440mm（W）×410mm（D）×70mm（H）
Weight
4.5kg～5.5kg（exclude HDD）
7
Model
Parameters
MAX504DT
MAX508DT
MAX516DT
Installation Mode
Desk/rack installation
Model
Parameters
AVR-1604
AVR-1608
AVR-1616
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， 1-ch TV output, HDMI/ VGA/TV video output at the same time (VGA/HDMI/TV of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，BNC port, audio via coaxial cable
Audio Output
1-ch，BNC port
Bidirectional Talk Input
Support（Independent bidirectional talk port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
1.3.4 AVR-1604/AVR-1608/ AVR-1616
8
Model
Parameters
AVR-1604
AVR-1608
AVR-1616
Alarm
Alarm Input
8-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
6-ch alarm output
HDD
HDD Port
4 SATA ports. Does not support eSATA port
Space/HDD
4T
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
Communication
1 RS232 port, 1 RS422 port, 1 RS485 port
USB
3 USB ports (One at the front panel and two at the rear panel)
Other
Power
AC90~264V 50+2% Hz (4/8-ch max 75W)
Power Consumption
≤35W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
1.5U case，440mm（W）×410mm（D）×70mm（H）
Weight
4.5kg～5.5kg（exclude HDD）
Installation Mode
Desk/rack installation
Model
Parameters
FLEX4ET
FLEX8ET
FLEX16ET
System Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
HD-AVS：1～15f/s（The 1st channel supports 25/30f/s） CVBS：1~25f/s（PAL）； 1~30f/s（NTSC）
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
1.3.5 FLEX4ET/FLEX8ET/FLEX16ET
9
Model
Parameters
FLEX4ET
FLEX8ET
FLEX16ET
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， 1-ch TV output, HDMI/ VGA/TV video output at the same time (VGA/HDMI/TV of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，BNC port, audio via coaxial cable
8-ch，BNC port, audio via coaxial cable
16-ch ， BNC port, audio via coaxial cable
Audio Output
1-ch，BNC port
Bidirectional Talk Input
Support（Independent bidirectional talk port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm Alarm Input
8-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
6-ch alarm output
HDD HDD Port
8 SATA ports，does not support eSATA port
Space/HDD
6T
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
2 RJ45 ports, 1000Mbps Ethernet ports
Communication
1 RS232 port, 1 RS422 port, 1 RS485 port
USB
4 USB ports (Two at the front panel and two at the rear panel)
Other
Power
AC90~264V 50+2% Hz (Max 220W)
Power Consumption
≤35W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
2U case，440mm（W）×460mm（D）×89mm（H）
Weight
7.0kg～8.0kg（exclude HDD）
Installation Mode
Desk/rack installation
10
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first.
2.1 Front Panel
The front panel is shown as below. See Figure 2-1.
Figure 2-1
2.2 Rear Panel
2.2.1 EDGE4T/EDGE8T/EDGE16T
This EDGE4T rear panel is shown as below. See Figure 2-2.
Figure 2-2
This EDGE8T rear panel is shown as below. See Figure 2-3.
11
SN
Icon
Name
Note
1 Power switch
Power on/off button.
2
1～8(16)
Alarm input port 1～8(16)
There are two types; NO (normal open)/NC
(normal close).
When your alarm input device is using external
power, please make sure the device and the DVR have the same ground.
NO1～NO3
Alarm output port 1～3
3 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO：Normal open alarm output port.  C：Alarm output public end.
C1～C3
3
VGA
VGA video
output
port
VGA video output port. Output analog video signal. Can connect to the monitor to view ananlog video output.
Figure 2-3
This EDGE16T rear panel is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following sheet for detailed information.
12
SN
Icon
Name
Note
4
AUDIO IN
Audio input port
Connect to audio input device such as speaker. 5
VIDEO IN
Video input port
Connect to analog camera, video input signal.
6 GND
Alarm input ground port.
7 Power input port
Input 12V DC.
8 USB2.0 port
Connect to USB storage device, mouse, burning DVD-ROM and etc.
9 A RS485 （ RS-485 ） communicati on port
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
10 Network port
1000M Ethernet port
11
HDMI
High Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
12
AUDIO OUT
Audio output port
Connect to video output device such as sound box.
2.2.2 AVR-1408/AVR-1416
This AVR-1408 products’ rear panel is shown as below. See Figure 2-7.
Figure 2-5
This AVR-1416 products’ rear panel is shown as below. See Figure 2-6.
13
SN
Icon
Name
Note
1 Power switch
Power on/off button.
2
1～8(16)
Alarm input port 1～8(16)
There are two types; NO (normal open)/NC
(normal close).
When your alarm input device is using external
power, please make sure the device and the DVR have the same ground.
NO1～NO3
Alarm output port 1～3
3 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO：Normal open alarm output port.  C：Alarm output public end.
C1～C3
3
VGA
VGA video
output
port
VGA video output port. Output analog video signal. Can connect to the monitor to view ananlog video output.
4
AUDIO IN
Audio input port
Connect to audio input device such as speaker. 5
VIDEO IN
Video input port
Connect to analog camera, video input signal.
6 GND
Alarm input ground port.
7 Power input port
Input 12V DC.
8 USB2.0 port
Connect to USB storage device, mouse, burning DVD-ROM and etc.
9 A RS485 （ RS-485 ）
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
Figure 2-6
Please refer to the following sheet for detailed information.
14
SN
Icon
Name
Note
B
communicati on port
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
10
HDMI
High Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
11 Network port 100M Ethernet port
12
AUDIO OUT
Audio output port
Connect to video output device such as sound box. SN
Icon
Name
Note
1 Power switch
Power on/off button.
2
RS-232
RS-232 debug COM.
It is for general COM debug to configure IP address or transfer transparent COM data.
3
1～16
Alarm input port 1～16
There are four groups.
The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
2.2.3 MAX504DT/MAX508DT/MAX516DT/ AVR-1604/AVR-1608/ AVR-1616
The rear panel is shown as below. See Figure 2-7.
Please refer to the following sheet for detailed information.
Figure 2-7
15
SN
Icon
Name
Note
When your alarm input
device is using external power, please make sure the device and the DVR have the same ground.
NO1～NO5
Alarm output port 1～5
5 groups of alarm output
ports. (Group 1 ： port NO1 ～ C1,Group 2:port NO2 ～ C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output
alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO: Normal open alarm
output port.
C: Alarm output public
end.
NC: Normal close alarm
output port.
C1～C5
NC5
A
RS-485 communication port
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
T+、T-、R+、R-
Four-wire full-duplex 485 port
Four-wire full-duplex 485 port. T+，T- is the output wire. R+，R- is the input wire.
CTRL 12V
Control power output
Controller 12V power output. It is to control the on-off alarm relay output.
4
VIDEO OUT
Video output port
Connect to video output devices such as TV.
5
AUDIO OUT
Audio output port
Audio output port. It is to output the analog audio signal
16
SN
Icon
Name
Note
to the devices such as the sound box.
6
MIC OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
Bidirectional talk output. Audio output on
1-window video monitor.
Audio output on
1-window video playback.
7
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as mike phone, pickup.
8
AUDIO IN
Audio input port
It is to receive the analog audio signal output from the devices such as mike phone, pickup.
9
VIDEO IN
Video input port
Connect to analog camera to input video signal.
10 Network port
1000M Ethernet port
11
VGA
VGA video output port
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
12
HDMI
High Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
13
eSATA
eSATA port
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.
14 USB2.0 port
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.
17
SN
Icon
Name
Note
15 Power socket
Power socket 16 GND
GND SN
Icon
Name
Note
1 Power socket
Power socket
2 Power switch
Power on/off button.
3
RS-232
RS-232 debug COM.
It is for general COM debug to configure IP address or transfer transparent COM data.
4
1～16
Alarm input port 1～16
There are four groups.
The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
When your alarm input
device is using external
2.2.4 FLEX4ET/FLEX8ET/FLEX16ET
The rear panel is shown as in Figure 2-8.
Please refer to the following sheet for detailed information.
Figure 2-8
18
SN
Icon
Name
Note
power, please make sure the device and the DVR have the same ground.
NO1～NO5
Alarm output port 1～5
5 groups of alarm output
ports. (Group 1 ： port NO1 ～ C1,Group 2:port NO2 ～ C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output
alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO: Normal open alarm
output port.
C: Alarm output public
end.
NC: Normal close alarm
output port.
C1～C5
NC5
A
RS-485 communication port
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
T+、T-、R+、R-
Four-wire full-duplex 485 port
Four-wire full-duplex 485 port. T+，T- is the output wire. R+，R- is the input wire.
CTRL 12V
Control power output
Controller 12V power output. It is to control the on-off alarm relay output.
5
AUDIO OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
6
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the analog audio signal output from the devices
19
SN
Icon
Name
Note
such as mike phone, pickup.
7
AUDIO IN
Audio input port
It is to receive the analog audio signal output from the devices such as mike phone, pickup.
8
VIDEO IN
Video input port
Connect to analog camera to input video signal.
9
MIC OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
Bidirectional talk output. Audio output on
1-window video monitor.
Audio output on
1-window video playback.
10
VIDEO OUT
Video output port
Connect to video output devices such as TV.
11 Network port
1000M Ethernet port
12
VGA
VGA video output port
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
13
HDMI
High Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
14
eSATA
eSATA port
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.
15 USB2.0 port
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.
20
SN
Icon
Name
Note
16 GND
GND Serial Number
Name
Function
1
Power button
Click it to boot up or shut down the device.
2
Address
Click it to input device number, so that you can control it.
3
Forward
Various forward speeds and normal speed playback.
4
Slow play
Multiple slow play speeds or normal playback.
When connect the Ethernet port, please use crossover cable to connect the PC and use the straight cable to connect to the switch or router.
2.3 Remote Control
The remote control interface is shown as in Figure 2-9. Please note remote control is not our standard accessory and it is not included in the accessory bag.
Figure 2-9
21
5 Next record
In playback mode, playback the next video.
6 Previous record
In playback mode, playback the previous video.
7
Play/Pause
In pause mode, click this button to realize normal playback.
In normal playback click this button to pause playback.
In real-time monitor mode, click this button to enter video search menu.
8 Reverse/pause
Reverse playback pause mode, click this button to realize normal playback.
In reverse playback click this button to pause playback.
9 Esc.
Go back to previous menu or cancel current operation (close upper interface or control)
10
Record
Start or stop record manually In record interface, working with the direction buttons to select the record channel. Click this button for at least 1.5 seconds, system can go to the Manual Record interface.
11
Direction keys
Switch current activated control, go to left or right. In playback mode, it is to control the playback process bar. Aux function(such as switch the PTZ menu)
12
Enter /menu key
go to default button go to the menu
13
Multiple-window switch
Switch between multiple-window and one-window.
14
Fn
In 1-ch monitor mode: pop up assistant function： PTZ control and Video color.
Switch the PTZ control menu in PTZ control interface.
In motion detection interface, working with direction keys to complete setup.
Loading...
+ 215 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use