IC Realtime 690HTVL User Manual

Installation Manual

· EL-750

VANDAL DAY/NIGHT DOME CAMERA

130809-1

EL-750 I-SNIPER VANDAL DAY/NIGHT DOME CAMERA

Copyright 2013, IC REALTIME, LLC. Made in Korea.

powered by

Please read this manual carefully before installation and operation of the product.

Important Safety Instructions Warning and Attention Symbols

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11. Use only attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of
time.

13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

14. The power plug must be readily accessible so that the equipment can be easily
disconnected from the AC power.

15. The product is still connected to the AC power whenever it is plugged in to a live
power outlet, even if the receiver is turned off using the remote control or front
panel buttons.

16. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.

CAUTION
– These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.

You must remember certain safety issues during installation and use of this equipment.
This guide provides various procedures and instructions. Some of these procedures
could result in injury or property damage if they are improperly performed.
Other procedures require additional attention.

In this guide, we use the following notation to inform you when you need to
pay attention to a safety or operational issue.

Designates a potential situation where the following may happen:

• Personal injury or death may occur.

• Equipment or property may be damaged.

Designates the following operational issues:

• Important operation or maintenance instructions follow.

• Additional attention is required.

For Your Safety

Designates the following operational issues:

• Important operation or maintenance instructions follow.

• Additional attention is required.

Designates the following operational issues:

• Important operation or maintenance instructions follow.

• Additional attention is required.

The Class II equipment symbol means the equipment has
additional insulation and does not need to be grounded.

2 3

Table of contents

1. Precautions ------------------------------------------------------------- 5

2. Limitation of liability --------------------------------------------------- 5

3. Disclaimer of warranty ----------------------------------------------- 6

4. Package ----------------------------------------------------------------- 6

5. Main Features --------------------------------------------------------- 7

6. Assembly overview -----------------------------------------------8~10

7. Troubleshooting ------------------------------------------------------11

8. Dimension (mm) ----------------------------------------------------- 12

9. Specification ---------------------------------------------------------- 13

10. OSD Manual for function control---------------------------14~17

1. Precautions

· Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.

· Please keep the manual in good condition for your future reference and service
application.

· Installation and services should only be carried out by an authorized personnel
according to local safety regulations.

· If any liquid or solid matter gets into the housing, immediately disconnect the camera
from power supply and have it checked by your authorized dealer before reusing.

· Avoid installing the camera at extremely hot or cold places.

If you are not a certified person, never try to dismantle the camera. To avoid electric

·
shock, never remove the screws or covers. There are no parts inside that need
maintenance by the user. All maintenance should be carried by qualified personnel.

·

Avoid installing the camera at a place of high humidity.

Avoid installing the camera at the place exposed to gas or oil.

·

·

Keep the top glass of the lens always clean in order to obtain the best picture quality

all the time. Be careful not to be stained by fingerprint.

· Don't face the camera directly toward sunlight or sunlight reflecting area.
CCD may go defective at this condition.

· Please give a special attention to keep the unit from dangerous drop or
external shock during the process of transportation or handling.

· Never try to touch the camera in wet hand. It may cause an electric shock.

Do not expose the camera to radioactivity. It causes a serious damage on the CCD.

·

2. Limitation of liability

This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or noninfringement of the third party's right. This publication
could include technical inaccuracies or typographical errors. Changes are added to the
information herein, at any time, for the improvements of this publication and/or the
corresponding product(s).

4 5