IC Realtime 4 Channel PoE Mobile Network Video Recorder User Manual
Mobile Network Video Recorder User’s Manual
V 1.0.0
Table of Contents
1 Features and Specifications ............................................................................................................... 1
1.1 Overview ........................................................................................................................................ 1
1.2 Function ......................................................................................................................................... 1
1.3 Features ......................................................................................................................................... 3
1.4 Specifications ................................................................................................................................ 3
2 Front Panel and Rear Panel ............................................................................................................... 5
2.1 Front Panel .................................................................................................................................... 5
2.2 Rear Panel .................................................................................................................................... 6
2.3 Remote Control ............................................................................................................................ 7
2.4 Mouse Operation .......................................................................................................................... 9
3 Installation and Connections ............................................................................................................ 11
3.1 Check Unpacked NVR ............................................................................................................... 11
3.2 About Front Panel and Real Panel .......................................................................................... 11
3.3 HDD Installation .......................................................................................................................... 11
3.4 Connecting Power Supply ......................................................................................................... 14
3.5 Connecting Video Input and Output Devices ......................................................................... 14
3.5.1 Connecting Video Output ................................................................................................... 14
3.5.2 Audio Output ........................................................................................................................ 14
3.6 Alarm Input and Output Connection ........................................................................................ 15
3.6.1 Alarm Input and Output Details ......................................................................................... 16
3.6.2 Alarm Input Port ................................................................................................................... 17
3.6.3 Alarm Output Port ................................................................................................................ 18
4 GUI Operation ..................................................................................................................................... 20
4.1 Login ............................................................................................................................................. 20
i
4.2 Navigation Bar ............................................................................................................................ 22
4.3 Right Click Menu ........................................................................................................................ 23
4.4 Main Menu ................................................................................................................................... 23
4.5 Search & Playback ..................................................................................................................... 23
4.6 Information .................................................................................................................................. 27
4.6.1 HDD Information .................................................................................................................. 27
4.6.2 BPS ........................................................................................................................................ 29
4.6.3 Log ......................................................................................................................................... 29
4.6.4 Version .................................................................................................................................. 30
4.6.5 Online Users......................................................................................................................... 31
4.6.6 Remote Device Information ............................................................................................... 31
4.6.7 GPS Log ............................................................................................................................... 32
4.6.8 Network Info ......................................................................................................................... 33
4.6.8.1 Network Test................................................................................................................ 33
4.6.8.2 Network Load .............................................................................................................. 34
4.7 Setting .......................................................................................................................................... 34
4.7.1 General ................................................................................................................................. 35
4.7.2 Encode .................................................................................................................................. 37
4.7.3 Schedule ............................................................................................................................... 39
4.7.4 RS232 ................................................................................................................................... 40
4.7.5 Network ................................................................................................................................. 41
4.7.5.1 Network Setting .......................................................................................................... 42
4.7.5.2 IP Filter ......................................................................................................................... 43
4.7.5.3 NTP Setup ................................................................................................................... 44
4.7.5.4 Multicast ....................................................................................................................... 45
4.7.5.5 PPPoE .......................................................................................................................... 46
4.7.5.6 DDNS ........................................................................................................................... 46
4.7.5.7 UPNP ........................................................................................................................... 48
4.7.5.8 WIFI .............................................................................................................................. 49
4.7.5.9 Email ............................................................................................................................ 51
4.7.5.10 FTP ............................................................................................................................... 52
4.7.5.11 Alarm center ................................................................................................................ 54
4.7.5.12 SNMP ........................................................................................................................... 54
4.7.5.13 Auto register ................................................................................................................ 55
4.7.6 Alarm ..................................................................................................................................... 56
4.7.7 Detect .................................................................................................................................... 59
4.7.7.1 Motion Detect .............................................................................................................. 59
4.7.7.2 Video Loss ................................................................................................................... 62
4.7.7.3 Camera Masking ........................................................................................................ 63
4.7.8 PTZ ........................................................................................................................................ 63
ii
4.7.9 Display .................................................................................................................................. 65
4.7.10 Default ................................................................................................................................... 66
4.7.11 Remote Device .................................................................................................................... 67
4.7.11.1 UPNP ........................................................................................................................... 67
4.7.11.2 Built-in Switch Setup .................................................................................................. 67
4.7.11.3 Remote Device ........................................................................................................... 68
4.7.11.4 Short-cut Menu ........................................................................................................... 71
4.8 Advanced ..................................................................................................................................... 71
4.8.1 HDD Management ............................................................................................................... 72
4.8.2 Abnormality........................................................................................................................... 75
4.8.3 Alarm Output ........................................................................................................................ 75
4.8.4 Manual Record ..................................................................................................................... 76
4.8.4.1 Manual record menu .................................................................................................. 76
4.8.4.2 Basic operation ........................................................................................................... 76
4.8.4.3 Enable/disable record ................................................................................................ 76
4.8.4.4 Enable all channel recording .................................................................................... 77
4.8.4.5 Stop all channel recording ......................................................................................... 78
4.8.5 Account ................................................................................................................................. 78
4.8.5.1 Modify Password ........................................................................................................ 79
4.8.5.2 Add/Modify Group ...................................................................................................... 80
4.8.5.3 Add/Modify User ......................................................................................................... 80
4.8.6 Auto Maintenance ............................................................................................................... 81
4.8.7 Config Backup ...................................................................................................................... 81
4.8.8 Vehicle Setting ..................................................................................................................... 82
4.9 Backup ......................................................................................................................................... 83
4.9.1 Detect Device ....................................................................................................................... 83
4.9.2 Backup .................................................................................................................................. 83
4.9.3 One key backup ................................................................................................................... 85
4.10 Shutdown ..................................................................................................................................... 85
5 Quick Configuration Tool................................................................................................................... 86
5.1 Overview ...................................................................................................................................... 86
5.2 Operation ..................................................................................................................................... 86
6 Web Operation.................................................................................................................................... 89
6.1 General Introduction .................................................................................................................. 89
6.1.1 Preparation ........................................................................................................................... 89
6.1.2 Log in ..................................................................................................................................... 90
6.2 LAN Mode .................................................................................................................................... 91
iii
6.2.1 Monitor Channel Menu Tree .............................................................................................. 92
6.2.2 System Menu ....................................................................................................................... 94
6.2.3 Monitor Window Switch ...................................................................................................... 94
6.2.4 PTZ Control .......................................................................................................................... 94
6.2.5 Color and More Setup ......................................................................................................... 97
6.3 WAN Login .................................................................................................................................. 98
6.4 Configuration ............................................................................................................................... 99
6.4.1 System Information ............................................................................................................. 99
6.4.1.1 Version Information .................................................................................................... 99
6.4.1.2 HDD information ....................................................................................................... 100
6.4.1.3 Log .............................................................................................................................. 100
6.4.2 System Configuration ....................................................................................................... 101
6.4.2.1 General Setup ........................................................................................................... 101
6.4.2.2 Encode ....................................................................................................................... 103
6.4.2.3 Schedule .................................................................................................................... 104
6.4.2.4 RS232 ........................................................................................................................ 106
6.4.2.5 Network ...................................................................................................................... 107
6.4.2.6 Alarm .......................................................................................................................... 115
6.4.2.1 Detect ......................................................................................................................... 118
6.4.2.2 PTZ ............................................................................................................................. 119
6.4.2.3 Default & Backup ...................................................................................................... 120
6.4.3 Advanced ............................................................................................................................ 120
6.4.3.1 HDD Management ................................................................................................... 120
6.4.3.2 Abnormity................................................................................................................... 121
6.4.3.3 Alarm I/O .................................................................................................................... 123
6.4.3.4 Record ........................................................................................................................ 124
6.4.3.5 Account ...................................................................................................................... 124
6.4.3.6 Snapshot .................................................................................................................... 127
6.4.3.7 Auto Maintenance .................................................................................................... 127
6.4.3.8 Vehicle Config ........................................................................................................... 128
6.4.3.9 Remote device .......................................................................................................... 129
6.4.3.10 Preview Control ........................................................................................................ 130
6.4.4 Additional Function ............................................................................................................ 131
6.4.4.1 IPC Config ................................................................................................................. 131
6.4.4.2 Auto register .............................................................................................................. 132
6.4.4.3 CDMA/GPRS ............................................................................................................ 133
6.4.4.4 Mobile Config ............................................................................................................ 134
6.4.4.5 WIFI Config ............................................................................................................... 134
6.5 Search ........................................................................................................................................ 135
6.6 Alarm .......................................................................................................................................... 138
6.7 About .......................................................................................................................................... 140
iv
6.8 Log out ....................................................................................................................................... 140
7 Digital Surveillance System ............................................................................................................ 141
8 FAQ .................................................................................................................................................... 142
9 Appendix A HDD Capacity Calculation ......................................................................................... 147
10 Appendix B Compatible SATA HDD.......................................................................................... 148
Appendix C Toxic or Hazardous Materials or Elements ..................................................................... 149
v
Welcome
Thank you for purchasing our network video recorder!
This user’s manual is designed to be a reference tool for your system.
Please open the accessory bag to check the items one by one in accordance with the list below.
Contact your local retailer ASAP if something is missing or damaged in the bag.
vi
Important Safeguards and Warnings
1．．．．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2．．．．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．．．．Installation
Keep upwards. Handle with care.
Do not apply power to the NVR before completing installation.
Do not place objects on the NVR
4．．．．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．．．．Environment
The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive
substances and etc.
This series product shall be transported, storage and used in the specified environments.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
Before your operation please read the following instructions carefully.
Installation environment
Keep away from extreme hot places and sources；
Avoid direct sunlight；
Keep away from extreme humid places；
Avoid violent vibration；
Do not put other devices on the top of the NVR；
Be installed in well ventilated place; do not block the vent.
Accessories
vii
Check the following accessories after opening the box：
Please refer to the packing list in the box *
viii
1
1 Features and Specifications
Features and Specifications
11
Features and Specifications Features and Specifications
1.1
1.1 Overview
Overview
1.11.1
Overview Overview
This series mobile NVR is a high-end HD digital video surveillance management product. This
series product integrates image process technology, wireless network technology, GPS
technology, structure technology and vehicle information sampling and process technology
together. It uses strong aluminum alloy case and adopts two 2.5-inch HDDs as the storage media.
It supports built-in 3G, WIFI wireless transmission mode and GPS module（optional）. Installed on
the vehicle, it can realize local audio/video storage and vehicle information sampling, at the same
time it can transmit real-time video and vehicle information to the remote management centre and
establish real-time remote wireless surveillance management system.
This series NVR can be widely used in many vehicle area or mobile surveillance area such as
long-distance passenger transport, city pubic transportation, public security system, road
administration, logistics vehicle.
1.2
1.2 F
Function
1.21.2
Slight difference may be found due to different series products.
It has analog output port and VGA port. You can use monitor or displayer to realize surveillance
function.
System supports TV/VGA output at the same time.
Storage function
Special data format to guarantee data security and can avoid vicious data modification.
Compression format
Support multiple-channel audio and video signal. An independent hardware decodes the audio
and video signal from each channel to maintain video and audio synchronization.
Backup function
Support backup operation via USB port (such as flash disk, portable HDD)
Client-end user can download the NVR file to local HDD to backup via network.
Record playback function
Support each channel real-time record independently, and at the same time it can support search,
forward play, network monitor, record search, download and etc.
Support various playback modes: slow play, fast play, backward play and frame by frame play.
Support time title overlay so that you can view event accurate occurred time
Support specified zone enlargement.
Network operation
Support network remote real-time monitor, remote record search and remote PTZ control.
Alarm activation function
unction
FF
unction unction
1
Several relay alarm outputs to realize alarm activation and on-site light control.
The alarm input port and output port has the protection circuit to guarantee device safety.
Communication port
RS485 port can realize alarm input and PTZ control.
RS232 port can connect to keyboard to realize central control, and can also connect to PC COM
to upgrade system and realize maintenance, and matrix control.
Standard Ethernet port can realize network access function.
PTZ control
Support PTZ decoder via RS485.
Support various decode protocols to allow the PTZ to control the speed dome.
Intelligent operation
Mouse operation function
In the menu, support copy and paste setup function
GPS positioning
The GSP information can activate the record function while the search function can activate the
vehicle movement track.
Please note only the unit of GPS module supports this function.
3G network
Latest wireless network communication technology allows you to easily control the device.
Please note only the unit of 3G module supports this function.
Drawn-out HDD design
The professional drawn-out anti-vibration design. It supports fix and removable operation and can
connect to PC to realize fast and convenience data backup.
Dual-backup
Save record file on the SD card to enhance safety and operation feasibility.
One-button operation
You can click just one button to realize record backup, program upgrade, which makes it suitable
for the daily maintenance and operation in the vehicle.
Dual–stream
Considering the wireless network band is small and the network is not stable, system adopts the
dual stream to implement real-time record and network transmission independently, which greatly
optimizes the network transmission encode code and enhance the wireless network control
compatibility.
Vehicle status record
There are eight external alarm ports. You can connect to the door signal, direction indicator lamp
signal, reversing light signal, stop lamp signal and etc to prompt the driver and record vehicle
2
status.
1.3
1.3 Features
Features
1.31.3
FeaturesFeatures
Adopt dual-HDD as storage media to enhance record save period.
Aluminum alloy case, small and sound ventilation, high stability.
Built-in power module, convenient installation.
Support PoE, can supply power to the network camera directly.
Abundant functions, support various alarm mode, record mode and support multiple
information, vehicle status sampling and record function.
Built-in 3G, WIFI wireless transmission module, and GPS module.
Support TV/VGA dual-output.
1.4
1.4 Specifications
Specifications
1.41.4
Specifications Specifications
Parameter
System
Resources
Operation System
Operation
Interface
Video
Compression
Decode Capacity
Audio
Compression
Video Input
Video Output
4-channel series (-G/C/E/T)
Max 4-channel 1080P, with the transmission rate of 8Mbps for each
channel;
Support 20 online users at the same time,
The image delay time of each channel is under 500ms.
Embedded Linux real-time operation system
WEB/Local GUI
H.264/MPEG4
For H.264, it max supports 4-channel 1080P.
G.711a
4-ch network compression video input (With PoE)
1-channel VGA analog video output.
Audio Input
Audio Output
Window Split
Multiple-channel
Playback
Alarm Input
Alarm Output
Storage
1-channel bidirectional talk input
1-channel bidirectional talk output
1/4-window
Max 4-channel playback.
8-channel alarm input
3-channel alarm output
Relay output DC 30V /1A，AC 125V/0.5A (Activation output), including
1-channel controllable DC +12V output (1A)
2 built-in SATA ports.
1 external eSATA port
3
RS232
Port(RS-422)
RS485
port(RS-485)
One RS232 port to debug and transmit COM data.
One RS485 port to control external PTZ and etc. Support various protocols.
USB2.0 Port
Network
Connection
GPS(Optional)
3G(Optional) Built-in 3G module(EV-DO，WCDMA，TD-SCDMA), support message
Power Port
IR Remote Control
Receiver
Clock
Power
Consumption
Working
Temperature
Working Humidity 10℅－90℅
Air pressure 86kpa－106kpa
2 peripheral USB2.0 ports.
One RJ45 10/100/1000Mbps self-adaptive Ethernet port.
Built-in GPS module. Realize GPS information display, aencode overlay,
and record.
Support GPS time synchronization.
Please note only the unit of GPS module supports GPS function.
activate online or offline, audio activate online or offline, alive time setup.
Please note only the unit of 3G module supports 3G function.
One power port. DC6-36V.
One IR remote control window on the front panel.
Built-in clock.
＜15W(Exclude HDD)
0℃～+60℃
Dimension
Weight 3Kg（Exclude HDD）
Installation
Special case design suitable for the vehicle surveillance.
180mm(W)×100mm(H)×203(L)mm
Desk/rack installation
4
2
2 Front Panel and Rear Panel
Front Panel and Rear Panel
22
Front Panel and Rear PanelFront Panel and Rear Panel
2.1
2.1 F
2.12.1
The front panel is shown as in Figure 2-1.
ront
ont Panel
ont ont
Panel
PanelPanel
FFFrrr
Figure 2-1
Please refer to the following sheet for detailed information.
SN Function
1
2
3
4 Alarm indicator light.
5
6 Record indicator light
7
8
Power indicator light
The red light is on when there is HDD. The light
is off when there is no HDD.
Network camera connection status indicator
light. The light becomes on when the connected
network camera is abnormal.
HDD storage indicator light. The red light
becomes on when the HDD write error occurs.
GPS indicator light
Please note only the unit of GPS module
supports this function.
3G indicator light
Please note only the unit of 3G module
supports this function.
5
WIFI indicator light
9
10 Remote control IR receiver
11 Lock button
12 RJ45 network port
13 USB2.0 port
14 eSATA port
2.2
2.2 Rear
Rear Panel
2.22.2
RearRear
The rear panel is shown as in Figure 2-2.
Panel
PanelPanel
Please note only the unit of WIFI module
supports this function.
Figure 2-2
Please refer to the following sheet for front panel button information.
SN Function
1 3G antenna port
Please note only the unit of 3G module supports this
function.
2 WIFI antenna port
Please note only the unit of WIFI module supports
this function.
3 RS232 network port
4 CAN audio broadcast port. Connect to audio broadcast
device.
5 Audio/video output
6
6 VGA port
SN Function
SN
Function
SN
Function
7 Network camera port. Connect to network camera, router
and etc.
8 Device power input port.
9 SIM card socket
10 Alarm input/output port
11 GPS aport
Please note only the unit of GPS module supports
this function.
12 Extension port
13 Bidirectional talk port
Extension Port
The extension port is shown as in Figure 2-3.
Figure 2-3
Please refer to the following sheet for detailed information.
1/2 5V output 3 Remote control
input
5 +12V output 7 Video output 8 GND
9 RXD_232 10 TXD_232
2.3
2.3 Remote Control
Remote Control
2.32.3
Remote ControlRemote Control
The remote control interface is shown as in Figure 2-1.
Please note remote control is not our standard accessory and it is not included in the accessory
bag.
4/6 USB
7
Zoom
in button
in the PTZ control
Figure 2-1
Serial Number Name Function
1 View Switch window
2 ID Click it to input device serial number, so that you
3 Number 0 to 9 Input password, channel or switch channel.
4 Record Record
5 Aux Auxiliary button
6 Enter Confirm button
Menu Menu button
Esc Cancel button
⊳
Direction buttons
Direction buttons in PTZ. Control.
7 Stop button
Slow play
Playback/pause
Backward
│ Previous
Forward
Various slow play speed and normal speed play.
Focus (-) button in the PTZ control.
8
│ Next
Various fats play speeds and normal play speed.
Focus (+) button in the PTZ control.
8 F1 Shortcut button to backup
9 F2 Reserved for future use.
10 F3 Reserved for future use.
2.4
2.4 Mouse Operation
Mouse Operation
2.42.4
Mouse Operation Mouse Operation
Please refer to the following sheet for mouse operation instruction.
Left click
mouse
When you have selected one menu item, left click mouse to view menu
content.
Modify checkbox or motion detection status.
Click combo box to pop up dropdown list
In input box, you can select input methods. Left click the corresponding button
on the panel you can input numeral/English character (small/capitalized). Here
← stands for backspace button. ＿ stands for space button.
In English input mode: _stands for input a backspace icon and ← stands for
deleting the previous character.
Double left
click mouse
Right click
mouse
Press
middle
In numeral input mode: _ stands for clear and ← stands for deleting the
previous numeral.
Implement special control operation such as double click one item in the file list
to playback the video.
In multiple-window mode, double left click one channel to view in full-window.
Double left click current video again to go back to previous multiple-window
mode.
In real-time monitor mode, pops up shortcut menu.
Exit current menu without saving the modification.
In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
9
button Page up or page down
Move
Select current control or move control
mouse
Drag
mouse
Select motion detection zone
Select privacy mask zone.
10
3
3 Installat
Installation and Connections
33
InstallatInstallat
Note: All the installation and operations here should conform to your local electric safety
rules.
3.1
3.1 Check Unpacked
Check Unpacked NVR
3.13.1
Check Unpacked Check Unpacked
When you receive the NVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the NVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can
remove the protective film of the NVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
3.2
3.2 About Front P
About Front Panel
3.23.2
About Front PAbout Front P
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the appendix for detailed information.
The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
ion and Connections
ion and Connectionsion and Connections
NVR
NVRNVR
anel and Real Panel
anelanel
and Real Panel
and Real Panel and Real Panel
3.3
3.3 HDD Installation
HDD Installation
3.33.3
HDD Installation HDD Installation
The unit you received has no HDD. Please remove the HDD box from the device and then follow
the steps listed below to install.
1) Remove HDD box cover, the HDD box and the parts are shown as below. See Figure
3-1.Please loosen the bolts of HDD box cover and then remove the top cover of the HDD box.
Figure 3-1
2) Now you can see an interface shown as in Figure 3-2 . Remove the two bolts from the HDD
bracket and then take out the bracket from the HDD box.
11
Figure 3-2
3) Now you can install the first HDD. Please turn the HDD bracket up. See Figure 3-3. Put the
HDD to the HDD bracket along the arrow direction. Line up the holes of the HDD to the HDD
secure holes. Use bolts to secure the HDD.
Figure 3-3
4）Install the second HDD. Please refer to Figure 3-4 to put the second HDD to the HDD bracket.
12
Line up the holes of the top of the HDD to the rear panel of the HDD bracket. Use bolts to secure
the HDD. You can kip to the next step if there is only one HDD on the box.
Figure 3-4
5) Now you can install HDD bracket. After you install the HDD(s), put the HDD bracket to the HDD
box and secure the two bolts of the HDD bracket. See Figure 3-5.
Figure 3-5
6) After you installed the HDD bracket, put the HDD box top cover back and secure the bolts of the
HDD box. Now the HDD installation is complete.
13
3.4
3.4 Connecting
Connecting Power
3.43.4
Connecting Connecting
Please check input voltage and device power button match or not.
We recommend you use UPS to guarantee steady operation, NVR life span, and other peripheral
equipments operation such as cameras.
3.5
3.5
CCCConnecting
3.53.5
System adopts standard RJ45 network port to input audio/video data.
3.5.1 Connecting Video Output
Video output includes a TCVBS(PAL/NTSC BNC（1.0VP- P， 75Ω）output and a VGA output.
System supports CVBS and VGA output at the same time.
When you are using pc-type monitor to replace the monitor, please pay attention to the following
points:
To defer aging, do not allow the pc monitor to run for a long time.
Regular demagnetization will keep device maintain proper status.
Keep it away from strong electromagnetic interference devices.
Using TV as video output device is not a reliable substitution method. You also need to reduce the
working hour and control the interference from power supply and other devices. The low quality
TV may result in device damage.
Note:
You need a switch cable if you want to use VGA output.
3.5.2 Audio Output
The audio output signal parameter is usually over 200mv 1KΩ (BNC). It can directly connect to
low impedance earphone, active sound box or amplifier-drive audio output device.
If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking. In
this case you can adopt the following measures:
Use better sound pick-up with better directing property.
Reduce the volume of the sound box.
Using more sound-absorbing materials in decoration can reduce voice echo and improve
Adjust the layout to reduce happening of the squeaking.
Please refer to Figure 3-6 for 4-pin aviation port cable information. It is for audio and video output.
onnecting VVVVideo
onnectingonnecting
acoustics environment.
Power Supply
Power Power
Supply
SupplySupply
ideo IIIInput
ideoideo
nput and
nputnput
and OOOOutput
andand
utput DDDDevices
utpututput
evices
evicesevices
Figure 3-6
14
Please refer to the following sheet for detailed information.
SN Function
1
2 GND
3 Audio port
4 Video port
Audio/video output cable is shown as below. See Figure 3-7. You can use it when your monitor
port is general BNC port.
Please refer to the following sheet for detailed information.
Audio/Video Output Cable (Aviation-level port 4p male socket )
12V external camera power. It is
less than 1.5A.
Figure 3-7
Socket Color and Definition
1
2
3 DC power male socket. External is negative and internal
4 DC power male socket. External is negative and internal
Note
For some special series products, you need contact your local retailer for additional audio/video
output cable.
3.6
3.6 Alarm Input and
Alarm Input and Output
3.63.6
Alarm Input and Alarm Input and
Yellow BNC male port（Video output）
White BNC male port（Audio output）
is positive.
（12V power output）
is positive.
（12V power output）
Output Connection
OutputOutput
Connection
Connection Connection
There are two alarm input types for you to select: normal open (NO) and normal close (NC).
1. Alarm input
a. Alarm input mode supports grounding alarm input.
b. Alarm input supports 12V-24V voltage signal alarm input.
15
c. When the alarm device is connecting one NVR and one other device, please use a relay to
separate them,
2. Alarm output
The alarm output port should not be connected to high power load directly (It shall be less than 1A)
to avoid high current which may result in relay damage. Please use the co contactor to realize the
connection between the alarm output port and the load.
3. How to connect PTZ decoder
a. Ensure the decoder has the same grounding with NVR, otherwise you may not control the PTZ.
Shielded twisted wire is recommended and the shielded layer is used to connect to the grounding.
b. Avoid high voltage. Ensure proper wiring and some thunder protection measures.
c. For too long signal wires, 120Ω should be parallel connected between A, B lines on the far end
to reduce reflection and guarantee the signal quality.
d. “485 A, B” of NVR cannot parallel connect with “485 port” of other device.
e. The voltage between of A,B lines of the decoder should be less than 5v.
4. Please make sure the front-end device has soundly earthed.
Improper grounding may result in chip damage.
3.6.1 Alarm Input and Output Details
Alarm input and output interface is shown as in Figure 3-8.
Figure 3-8
Please refer to the following sheet for detailed information.
SN Function
1-8
9
10/11
12/13
14
15
Alarm input 1-8
GND
Alarm output1
Alarm output2
GND
On-off 12V output
16
16
PTZ control cable AB cable.
17/18
Bidirectional talk port interface is shown as in Figure 3-9.
Please refer to the following sheet for detailed information.
SN Function
1 12V/1A
GND
Figure 3-9
2 GND
3 MIC IN
4 MIC OUT
5/6 Speaker+, speaker-
3.6.2 Alarm Input Port
Please refer to the following sheet for more information. See Figure 3-10.
Normal open or Normal close type.
Please parallel connect COM end and GND end of the alarm detector (Provide external
power to the alarm detector).
Please parallel connect the Ground of the NVR and the ground of the alarm detector.
Please connect the NC port of the alarm sensor to the NVR alarm input(ALARM)
Use the same ground with that of NVR if you use external power to the alarm device.
Figure 3-10
17
3.6.3 Alarm Output Port
voltage)
2 ways relay alarm output (NO contact). Provide external power to external alarm device.
To avoid overloading, please read the following relay parameters sheet carefully.
RS485 A/B cable is for the A/B cable of the PTZ decoder.
Relay Specification
Model: HFD23
Contact
Parameter
Performance
Parameter
Contact mode 1Z
Contact resistance 100mΩ(0.1A 6VDC)
Contact material AgNi+gold-plating
Contact 0.5A 125VAC/1A 30VDC
Max switch voltage 125VAC / 60VDC
Max switch current 2A
Max switch power 62.5VA/30W
Min allowed load 1mA 5V
Mechanical durability 1x107(300/min)
Electric durability 1x105(30/min)
Insulation resistance 1000MΩ(500VDC)
Media
pressure
Between
loop and
Between
1000VAC 1min
400VAC 1min
separated
contact
Operation time (Rated
voltage)）
Release time (Rated
voltage)
Bound time (Rated
Loop temperature
rise(Rated voltage)
Strike 98m/s2
Vibration 10Hz~55 Hz 3.3mm Double amplitude
Humidity 98% RH, 40℃
Temperature -30 ~70℃ ℃
Weight About 2.2g
≤5ms
≤5ms
About 5ms
≤65K
leading-out end mode DIP
18
Seal mode Sealed
150mW
Loop Rated Loop Power Standard mode：200mW； Sensitivity mode：
Please note the number in the above sheet is the initial value.
19
4
4 GUI Operation
GUI Operation
44
GUI Operation GUI Operation
Connect the device to the monitor and then connect a mouse and power cable. Click the power
button at the rear panel and then boot up the device to view the analog video output. You can use
the mouse to implement some GUI operation.
4.1
4.1 Log
Login
LogLog
in
in in
4.14.1
After device booted up, the system is in multiple-channel display mode. See Figure 4-1.
Figure 4-1
Right click mouse, you can see login interface. See Figure 4-2.
System consists of four accounts:
Username: admin. Password: admin. (administrator, local and network)
Username: 888888. Password: 888888. (administrator, local only)
Username: 666666. Password: 666666(Lower authority user who can only monitor, playback,
backup and etc.)
Username: default. Password: default(hidden user)
You can use USB2.0 mouse to input. Click to switch between numeral, English character
(small/capitalized) and denotation.
Note:
For security reason, please modify password after you first login.
Continuous three times login failure will result in system alarm and five times login failure will
result in account lock.
Figure 4-2
20
You can overlay the corresponding date, time and channel name on each screen. You can refer to
3 4 5 6
the following sheet for channel record or alarm status information.
1111
2222
Preview Control
The preview control function has the following features.
Support preview playback.
In the preview desktop, system can playback previous 5-60 minutes record of current
channel. Please go to the Main Menu->General to set real-time playback time.
Support drag and play function. You can use your mouse to select any playback start
time.
Support playback, pause and exit function.
Right now, system does not support slow playback and backward playback function.
Support digital zoom function.
Support real-time backup function.
You can follow the contents listed below for the operation instruction.
Preview control interface
Move you mouse to the top centre of the video of current channel, you can see system pops
up the preview control interface. See Figure 4-3. If your mouse stays in this area for more than
6 seconds and has no operation, the control bar automatically hides.
Recording status
Motion detection
1 2
3333
4444
Video loss
Camera lock
Figure 4-3
You can refer to the following sheet for detailed information.
SN Name Function
It is to playback the previous 5-60 minutes
record of current channel.
1 Realtime playback
2 Digital zoom
3
Real-time backup
function
Please go to the Main Menu->General to set
real-time playback time.
System may pop up a dialogue box if there is no
such record in current channel.
It is to zoom in specified zone of current channel.
It supports zoom in function of multiple-channel.
The selected area has an icon as and the
free area is shown as an icon as .
It is to backup the video of current channel to the
USB2.0 device. System can not backup the
21
Loading...