ICPDAS ZB-2570, ZB-2571, ZB-2571P, ZB-2570P Quick Start Manual

ZB-2570/2571/2570P/2571P Quick Start Guide, Ver. 1.0 Page 1

Quick Start Guide

Become familiar with your ZB-2570/2571/2570P/2571P in minutes!

ZB-2570/2571/2570P/2571P Quick Start Guide, Ver. 1.0 Page 2

1. Quick Start for the ZigBee Converter

1. Before configuring the ZigBee converter, adjust the switch to

the ZBSET position then switch on the power (Figure 1). After
configuration is complete, adjust the switch to the RUN
position then switch on the power (Figure 2). Be sure to turn
the power off before adjusting the switch.

2.

After installing the ZigBee_Configuration_Utility_Ver_3.3, the

executable file can be found at:

Start\ProgramFiles\ICPDAS\ZigBee_Configuration_Utility_Ver_3
.3

\

ZigBee_Configuration_Utility_Ver_3.3.exe

3. Connect the ZigBee converter using one of the hardware

interfaces (RS-232, RS-485 or Ethernet; the default
configuration interface is RS-232) and execute the utility.

4. When the following screen is displayed:

In the

Environment Settings

section:

1. Choose the language.

2. Choose the module (ZB-2570/2571/2570P/2571P).

3. Click the Next button.

1

2

3

Figure

2 Figure 1

ZB-2570/2571/2570P/2571P Quick Start Guide, Ver. 1.0 Page 3

5. When the following screen is displayed:

In the

Build the Connection

section:

1. Select the configuration interface of your ZigBee converter module.

2. Enter the interface parameters (COM Port number or IP)

3. Click the Connect button.

1

2

3