ICPDAS ZB-2550, ZB-2550-T, ZB-2550-PA, ZB-2550P, ZB-2551P User Manual
...
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---1
ZB-2550/ZB-2551 Series
User Manual
Warranty
All products manufactured by ICP DAS are under warranty
regarding defective materials for a period of one year, beginning
from the date of delivery to the original purchaser.
Warning!
ICP DAS assumes no liability for any damage resulting from
the use of this product. ICP DAS reserves the right to change this
manual at any time without notice. The information furnished by
ICP DAS is believed to be accurate and reliable. However, no
responsibility is assumed by ICP DAS for its use, not for any
infringements of patents or other rights of third parties resulting
from its use.
Copyright
Copyright @ 2007 by ICP DAS Co., Ltd. All rights are
reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---2
Table of Contents
1. Introduction ....................................... 3
1.1 More Information ........................................................................................4
1.2 Pin Assignment ..............................................................................................6
1.3 Specifications..................................................................................................7
1.4 Block Diagram ................................................................................................8
1.5 Wire Connection ........................................................................................... 9
1.6 Quick Start ...................................................................................................11
1.7 Default Settings ........................................................................................... 15
2. Applications ......................................16
2.1 Operating Modes................................................................................................ 16
2.2 Application Example ......................................................................................... 20
Operating Mode 1 : Transparent Mode .......................................................... 20
Operating Mode 2 : Modbus Mode ................................................................... 21
Operating Mode 3 : Addressable Mode ......................................................... 22
Operating Mode 4 : ZBIO Mode ...................................................................... 23
2.3 ZigBee Network Groups.................................................................................. 24
3. Appendix .........................................26
3.1 Zigbee Version Comparison ......................................................................... 26
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---3
1. Introduction
The ZB-2550/ZB-2550P/ZB-2550-T/ZB-2550-PA is hereinafter
referred to as "ZB-2550 series" and the
ZB-2551/ZB-2551P/ZB-2551-T/ZB-2551-PA is hereinafter
referred to as "ZB-2551 series".
ZigBee is a specification based on the IEEE 802.15.4 standard
for wireless personal area networks (WPANs). ZigBee operates in
the ISM radio bands and its focus is to define a general-purpose,
inexpensive, self-organizing, mesh network that can be used for
industrial control, embedded sensing, medical data collection,
smoke and intruder warning, building automation, home automation,
and domotics, etc.
At present, the ICP DAS ZigBee converter ZB-2550 series
and ZB-2550 series, supports the RS-232 and RS-485 interfaces.
The main design goal is limited data communication using wireless
transmission, so may provide a better solution for environments
where wiring is difficult.
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---4
1.1 More Information
The ZB-2550 series and the ZB-2551 series are small-sized
wireless ZigBee converters based on the IEEE 802.15.4 standard.
They allow RS-485/RS-232 interfaces to be converted to a
ZigBee wireless network. Only one ZB-2550 series (Host) is
allowed in a ZigBee network and is used to initialize and manage
the data transmission routes. The ZB-2551 series (Slave) ZigBee
router is responsible for transmitting/receiving data from its
child/parent router or the host. ICP DAS ZigBee products are
designed for low data rates. The main benefit of ICP DAS ZigBee
products is that they can be used to define a general-purpose,
self-organizing mesh network, which can be highly advantageous
for industrial control.
The typical transmission range of the ICP DAS Zigbee normal
version and T-version series converter is 100m, and the P-version
and PA-version is 700m.
The transmission frequency range of the ZigBee converter is
between 2.405 GHz and 2.48 GHz, separated into 5 MHz sectors,
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---5
and provides 16 channels, and 65536 PAN IDs (65535 network
groups can be set).
The ZigBee converter includes a repeater module that can be
used to increase communication range or prevent data loss if the
connection is interrupted or becomes unstable. Please refer to
ZigBee converter other document for more information as
following links:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/zigbee/zigbee_conv
erter/
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---6
1.2 Pin Assignment
ZB-2550/ZB-2551 Series
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---7
1.3 Specifications
Models
ZB-2550/
ZB-2551
ZB-2550P/
ZB-2551P
ZB-2550-T/
ZB-2551-T
ZB-2550-PA/
ZB-2551-PA
Wireless
RF channels 16
Receive sensitivity -102 dBm
Transmit power 9 dBm 22 dBm 4 dBm 22 dBm
Network Topology
support
Star, Mesh and Cluster tree
Antenna 2.4GHz - 3dBi Omni-Directional antenna
Transmission Range 100 m 700 m 100 m 700 m
Notes: ZB-255x series, when the x equal 0 means host and 1 is slave.
Models
ZB-2550/
ZB-2551
ZB-2550P/
ZB-2551P
ZB-2550-T/
ZB-2551-T
ZB-2550-PA/
ZB-2551-PA
General
CPU 8-bit microcontroller
Module Type Host/Slave Host/Slave Host/Slave Host/Slave
Communication Interface
Host
RS-232 (TxD, RxD and GND);
D-SUB 9 Female, Non-isolated
Slave
RS-232 (TxD, RxD and GND);
D-SUB 9 Male, Non-isolated
COM 0
RS-485 (DATA+, DATA-; internal ASIC self-tuner); Non-isolated
COM 0 Settings
Data Bit 8
Parity Even, Odd, None
Stop Bit 1, 2
LED Indicators
ZigBee Net State Green
ZigBee RxD Yellow
Power Red
Power
Protection Power reverse polarity protection
EMS Protection ESD, Surge, EFT
Required Supply
Voltage
+10 VDC ~ +30 VDC
Power Consumption 0.5 W 2 W (max) 0.5 W 2 W (max)
Connection 5-Pin 5.08 mm Removable Terminal Block
ZB-2550/ZB-2551 Series User Manual Ver1.3, Feb /2011 ---8
Models
ZB-2550/
ZB-2551
ZB-2550P/
ZB-2551P
ZB-2550-T/
ZB-2551-T
ZB-2550-PA/
ZB-2551-PA
Mechanical
Casing Plastic
Flammability UL 94V-0 materials
Dimensions 33 mm x 78 mm x 107 mm (W x L x H)
Installation DIN-Rail
Wireless
Operating
Temperature
-25 °C ~ +75 °C
Storage
Temperature
-40 °C ~ +80 °C
Relative Humidity 5 ~ 95% RH, non-condensing
1.4 Block Diagram
The Normal and T-version of ZB-2550/ZB-2551 Series:
The P-version and PA-version of ZB-2550/ZB-2551 series.
Loading...