ICPDAS USB-87P2, USB-87P1, USB-87P4, USB-87P3 Quick Start Manual
p. 1
USB-87P1/2/4/8 Quick Start 1.02
ICP DAS, Co., LTD www.icpdas.com
Package Checklist
Items
Quantity
Model No.
Description
USB-87Pn
1
USB-87P1
Hardware module:
USB-87Pn I/O Unit
P1: 1 Slot P2: 2 Slots
P4: 4 Slots P8: 8 Slots
USB-87P2
USB-87P4
USB-87P8
Cable
1
CA-USB18
USB connector cable
Manual
1
-
Quick Start Manual (this manual)
CD 1 -
Software utility, USB-87Pn User
Manual
Screw
Driver
1
-
2.4 mm Screw driver (minus
style)
NOTE: USB-87Pn is only for High Profile I-87K I/O modules,
please DO NOT use Low Profile I/O modules. For more
information, please refer to Chapter 2.2.5 & Appendix B of
“USB-87P1/2/4/8 User Manual”.
Preparation
Power Supply: +10V ~ +30V /DC (Ex: DP-665)
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
Install USB-87Pn DriverInstaller to PC:
at CD:\NAPDOS\87pn_io_unit\USB-87Pn
or ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/87pn_io_unit/USB-87Pn/
Install DCON Utility to PC:
(Version 4.5.2 or above version. Please remove the old version
before install the new version) at CD:\ Napdos\Driver\DCON_Utility
or ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
Original Writer : Eva Li
Last Editor : Hans , 05/27/2015
p. 2
Hardware Configuration
1. View of the USB-87Pn
Slot 0
Power Module
CPU Module
High Profile I-87K I/O Slots
87Pn Power
Power
Connector
Slots LED
CPU Power
System Ready
Auto Configuration Indicator
Auto Configuring
Dip Switch
Enable/Disable
Slot 1
Slot 2
Slot 3
USB Port
Power & CPU
High Profile I-87K I/O
Power Connector
Auto Configuring
Dip Switch
Enable/Disable
USB Port
Slots LED Indicators
Power
System Ready
Auto Configuration
Indicator
Slot 0
Slot 1
USB-87P4
USB-87P8 is
like USB-87P4,
but with 8 slots.
USB-87P2
USB-87P1 is
like USB-87P2,
but with 1 slot.
p. 3
2. Wire the 87Pn to Power and PC
3. Configure CPU Module
Switch
Label
Setting
Description
Dip
Switch
Auto
Config.
ON
Enable
(Switch to ON)
OFF
Disable
USB Connector Cable
(CA-USB18)
PC (COM X)
USB-87P4
Power Supply
+10~+30 VDC
GND
+Vs
+Vs
GND
To USB port
To USB port
Loading...