ICP DAS UA-5231, UA-5231M, UA-5231M-3GWA, UA-5231M-4GE, UA-5231M-4GC Quick Start Guide

P.1

Packing List

The shipping package includes this document and the following items:

UA-5231 or UA-5231M
UA-5231M-3GWA
UA-5231M-4GE/4GC

CA-0910

Cable

MicroSD

Card

Screw
Driver

Pin

Terminal

x 16

M3x6L Screw x 4
44mm DIN-Rail Clip x 1

(UA-5231M, UA-5231M-4GE/4GC,

UA-5231M-3GWA Only)

GSM Antenna
(ANT-421-04)

(UA-5231M-4GE/4GC,

UA-5231M-3GWA Only

Technical Resources

How to search for drivers, manuals and spec information on ICP DAS website.

 For Mobile Web

 For Desktop Web

UA-5200 Series Quick Start

v1.6, 03/2021

Technical Support

[e-mail]
https://www.icpdas.com

P.2

1. Preparations for Devices

Prepare one UA-5200 (Ex: UA-5231), and the following:

1. PC/NB: Can connect to the network and set the network

2. Ethernet Hub or Switch (Ex: NS-205A)

3. Power Supply: +12 ~ +48 VDC (Ex: MDR-60-24)

2. Hardware Connection

Connect the UA-5200 with the RJ-45 Ethernet port to an
Ethernet hub/switch and PC. You can also link directly the
UA-5200 to PC with an Ethernet cable.

After power is connected, please【wait 1 minute】for UA-5200
start-up procedure. When the "RUN/PWR" light starts flashing,

it represents the boot is complete.

Power Supply

(12 ~ 48 VDC)

Ethernet

Cable

Ethernet

Cable

Hub/Switch

P.GND

PWR

+

V

-V