ICPDAS SMS-530 Quick Start Manual

SMS-530 Quick Start v1.0 2013/04

1/8

Quick Start

APR 2013 Version 1.0

Package checklist

The package includes the following items:

 One SMS-530 hardware module
 One GSM Antenna (ANT-421-02)
 One RS-232 cable (CA-0910)
 One Quick Start
 One software utility CD
 One screw driver

Note:

If any of these items are missed or damaged, contact the

local distributors for more information. Save the shipping
materials and cartons in case you want to ship in the future.

 Appearance and pin assignments

DI/DO

Terminal No.

Pin Assignment

DI

01

DI0

02

DI1

03

DI2

04

DI3

05

DI4

06

DI5

07

DI6

08

DI7

09

DI8

10

DI9

DO

11

DO0

12

DO1

13

DO.PWR

DI/DO

14

Ext.GND

COM Port & Power Input

Terminal No.

Pin Assignment

COM3

RS-232

01

GND

02

RxD3

03

TxD3

COM2

RS-232

04

GND

05

RxD2

06

TxD2

N/A

07

N/A

Power Input:

+10 ~ +30 VDC

08

DC.+VS

09

DC.GND

Frame ground

10

F.G

SMS-530 Quick Start v1.0 2013/04

2/8

I/O Connection

DI hardware connection

NC(Normal Close) mode

NO (Normal Open) mode

DO hardware connection

SMS-530 Quick Start v1.0 2013/04

3/8

LED indicators

LED

Description

EXT (red)

on

The external Power is active

off

The external Power is not active

3G (green)

Blinking*2
(2 sec)

3G module normal (After modem registered)
Use 3G SIM card

Blinking*1
(2 sec)

3G module normal (After modem registered)
Use 2G SIM card

off

Modem fail (or Blinking(not 3 sec))

STA (orange)

Normal

3G Fail

PIN code is wrong

EXT on

Blanking (1 sec)

Always on or off

Blinking per 50 ms

EXT off

Off (sleep mode) or

Blanking (1 sec)(wake up)

Always on

Blanking per 50 ms

 Installation

If users want to start SMS-530 normally, it needs to follow these steps to install the SMS-530

below:

1. Install the antenna

2. Plug in the normal SIM card (Before apply the SIM card, confirm it is OK by mobile

phone.)

3. Pin08 and Pin09 connect to the DC.+VS and DC.GND of the power supply.

4. Follow the User’s Manual section 2.4 to wire the I/O connection.

5. If you want to use the backup power, please connect the Li-battery(Option) to SMS-

530.

6. It is needed 30 ~ 50 seconds for SMS-530 to search the 3G base and register to the ISP.

After finishing the process, SMS-530 would be in normal operation mode and the STA
LED would blank (1 sec). The start time of SMS-530 depends on the strength of signal.