- 1 -
Language
English
Version V1.0
Update Oct.2008
………………………………………………
What’s on your package?
One PCI-1202/1602/180x series card
One companion PCI CD (V3.6 or later)
One Quick Start Guide(This document)
………………………………………………
Installing Windows Driver
Follow those steps:
1. Setup the Windows driver.
You can get the driver from:
PCI-1202 :
CD:\NAPDOS\PCI\PCI-1202\DLL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1202/dll_ocx/
1
2
PCI-1202/1602/180x
- 2 -
PCI-1602:
CD:\NAPDOS\PCI\PCI-1602\DLL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1602/dll_ocx/
PCI-180x:
CD:\NAPDOS\PCI\PCI-180x\DLL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-180x/dll_ocx/
2. Click button to start installation.
3. Click button to install driver into the
default folder.
4. Click button to continue installation.
5. Select “NO, I will restart my computer later” and
then click button.
………………………………………………
Installing Hardware on PC
Follow those steps:
1. Shut down and power off your computer
2. Remove all covers from the computer
3. Select an empty PCI slot
4. Carefully insert your I/O card into the PCI slot
5. Replace the PC covers
6. Power on the computer
After powering-on the computer, the Plug&Play card
could work immediately.
3
Windows driver only support windows 98/NT/2000 and
XP/2003
/vista 32
-
bit versions.
- 3 -
………………………………………………
Jumper Setting
JP1 : A/D Input Type Selection
J1 : D/A Reference Voltage Selection
D/I Port Setting (PCI-1202HU/LU only)
4
JP1
Differential
Inputs
6
2
1
5
JP1
Single-Ended
Inputs (default)
1
5
2
6
J1
1
± 10 Voltage
output (default)
J1
1
± 5 Voltage
output
JP2
3
2
1
Pull High
JP2
3
2
1
Pull Low
Loading...