ICPDAS NS-208A, NSM-208A User Manual

NS-208A/NSM-208A User’s Manual (Version 1.0, Aug/2011) --------------- 1

NS-208A/NSM-208A

Unmanaged 8-Port Industrial 10/100 Mbps Ethernet Switch

Introduction

The NS-208A/NSM-208A has 8 Ethernet ports that
support 10/100 Base-TX, with a 10/100M auto
negotiation feature and auto MDI/MDI-X function.

All Ethernet ports have memory buffers that
support the store-and-forward mechanism, which
assures that data can be transmitted properly. The
NS-208A/NSM-208A supports advanced network
standards to optimize network performance,
reduce maintenance costs, and secure network
safety.

The flow control mechanism is also negotiated.
There is link/data rate LEDs for each port to aid
troubleshooting. Port connectors are shielded RJ-

45.

Features

Automatic MDI/MDI-X crossover for plug-and-play
Each port supports both 10/100Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
Operating temperatures, –40 ~ +75°C
DIN-Rail

Specifications

Models NS-208A NSM-208A

Technology

Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 2 Gbps
Frame buffer memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control

Interface

RJ45 ports

10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X

connection
LED Indicators Power, Link/Act , 10/100M
Ethernet Isolation 1500 Vrms 1 minute

Power Input

Input Voltage Range +12 ~ +48 VDC
Power consumption 0.2 A@ 24 VDC
Protection Power reverse polarity protection
Connection 3-Pin Removable Terminal Block

Mechanical

Casing Plastic (Flammability UL 94V-0) Metal (IP30 Protection)

Dimensions (W x L x H) 31 mm x 157 mm x 113 mm 25 mm x 168 mm x 119 mm

Installation DIN-Rail

Environmental

Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing

NS-208A/NSM-208A User’s Manual (Version 1.0, Aug/2011) --------------- 2

LED Indicator Functions:
LED Color Description

Red On Power is On Power
Red Off Power is Off
Yellow On Link to 100 Mbps
Yellow Off Link to 10 Mbps
Green On Link/Act

Port1 ~ 8

Green Off Not Networking

Pin Function For Terminal Block:

External power supply is connected using the removable terminal block:

PWR : Power input (+12 ~ +48 VDC) and should be connected to the power supply (+)
GND : Ground and should be connected to the power supply (-)
F.G. : F.G. stands for Frame Ground (protective ground). It is optional. If you use this
pin, it can reduce EMI radiation; improve EMI performance and ESD protection.

Dimensions:
NS-208A

Left Side View Front View Right Side View Top View Bottom View Rear View

NSM-208A

Left Side View Front View Right Side View Top View Bottom View Rear View

Ordering information

NS-208A CR Unmanaged 8-Port Industrial 10/100 Mbps Ethernet switch
NSM-208A CR Unmanaged 8-Port Industrial 10/100 Mbps Ethernet switch; metal casing