ICP DAS iWSN-1131-mA Quick Start Guide
P1
iWSN-1131-mA Quick Start
v1.0, July 2020
Packing List
In addition to this guide, the package includes the following items:
iWSN-1131-mA
Module
Screw Driver
Technical Support
service@icpdas.com
www.icpdas.com
Resources
How to search for drivers, manuals and spec
information on ICP DAS website.
For Mobile Web
For Desktop Web
iWSN-1131-mA
iWSN-1131-mA
P2
Warning
ICP DAS assumes no liability for any damage resulting from the use of this
product. ICP DAS reserves the right to change this manual at any time without
notice. The information furnished by ICP DAS is believed to be accurate and
reliable. However, no responsibility is assumed by ICP DAS for its use, not for any
infringements of patents or other rights of third parties resulting from its use.
Limitation of Warranty
This warranty does not apply to defects resulting from unauthorized modification,
misuse, or use for reason other than electrical power monitoring. The supplied
meter is not a user-serviceable product.
Product Warranty & Customer Support
ICP DAS warrants all products free from defects in material and workmanship for a period of one year from
the date of shipping. During the warranty period, we will, at our position, either repair or replace any
product that proves to be defective. To report any defect, please contact us. Please have the model, serial
number and a detailed problem description available when you call. If the problem concerns a particular
reading, please have all meter readings available. When returning any merchandise to ICP DAS, a return SN.
Is required.
1
Appearance
Number
Instructions
1
Build in PCB antenna
2
DIP switch of power
3
Current measurement
connector
4
Thermistor interface
5
Boot and wake button
6
DIP switch of parameter
setting
7
LED indicators
○
1
○
3
○
4
○
6
○
7
○
5
○
2
P3
2
Wire and Buttons
Switch
Instructions
PWR
ON
Power on
OFF
Power off
Pin
Name
Instructions
6
CH0 mA-
(Charge)
Current measurement pin,
have directionality, the
positive terminal is
connected to the positive
terminal, and the negative
terminal is connected to
the negative terminal,
support measuring and
charging function.
5
CH0 mA+
(Charge)
4
CH1 mA-
Current measurement pin,
have directionality, the
positive terminal is
connected to the positive
terminal, and the negative
terminal is connected to
the negative terminal, only
measuring function.
3
CH1 mA+
2
CH2 mA-
1
CH2 mA+
Extension bus
Instructions
Temp.
Thermistor Interface
Button
Instructions
Wake
Manual wake up
Boot
After pressing for 1~3 seconds, the
LED light will be on for 1 second and
then off. This mean boot complete.
Loading...