ICPDAS I-7560, I-7560U Quick Start Manual

I-7560

USB to RS-232Converter

Quick Start Guide

Product Website:

http://www.icpdas-usa.com/i_7560.html

1. Introduction

The I-7560/I-7560U provides a Windows serial COM port via it's USB
connection and is compatible with new and legacy RS-232 devices. USB
Plug-and-Play allows easy serial port expansion and requires no IRQ, DMA,
or I/O port settings manually.

The I-7560/I-7560U features a full set of RS-232 modem data and control
signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND) on it's PC
compatible DB-9 male connector. It also features a high-speed 115200 bps
transmission rate.

The I-7560/I-7560U is powered from the USB bus and no additional power
supply is needed.

2. System Network Configuration

I-7560 USB to RS-232Converter- QuickStart (Jan/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

1

3. Block Diagram

I-7560 USB to RS-232Converter- QuickStart (Jan/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

2

4.Driver Installation

Installing the Device
Download driver files and install

1. Package CD

2.

http://www.icpdas-usa.com/documents/drivers/756x/756x.zip

The following steps will show how to install the device under Windows 7.

1. Power on your computer and boot to Windows.

2. Locate the USB port of your computer and plug in the I-7560.

3. Windows will detect the new device and will initiate the Found New Hardware Wizard
prompting you to install the software for the detected USB Device. Select to install from
a list or specific location. Click Next to continue.

\Napdos\7000\756x\7560

I-7560 USB to RS-232Converter- QuickStart (Jan/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3