ICPDAS I-7188XBD-CAN, I-7188 Quick Start Manual

I-7188XBD-CAN

I-7188 CAN bus series Programmabl e Aut omation

Controller

Quick Start Guide

Product Website:

http://www.icpdas-usa.com/i_7188xbd_can.html

1. Introduction

The I-7188XBD-CAN series PACs (Programmable Automation Controller) are powered
by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash
memory. All of them provide several communication interfaces to adapt to various
applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their
application program flexibly with C/C++ language because of the built-in MiniOS7
operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types
for users to match their requirement. For I-7188XBD-CAN, it provides 1 open collector
digital output channel and 1 digital input channel. It is useful for transfer the command
from differential communication interface. Therefore, it can satisfy the applicati ons wit h
I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient
solution for diversification CAN application.

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

1

2. Terminal Resistor Jumper Selection

Remove the cover of the I-7188XBD-CAN/μPAC-7186EXD-CAN. Users can see the

part of internal structure shown as following figure. The XC100 provides users one

jumper-selected termination resistor (J3). Its position is displayed below.

The jumper J3 is used to judge the resister of CAN network. When users want to set the
jumper JP3, the upper cover of I-7188XBD-CAN/ μPAC-7186EXD-CAN needs to be
removed. About the J3 jumper setting, please refer the following figure

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

2