ICPDAS I-7067 Quick Start Manual
I-7067
7 Channel Relay Output Data Acquisition
Module with Form A Relay Outputs
Quick Start Guide
Product Website:
http://www.icpdas-usa.com/i_7067_i_7067d.html
http://www.icpdas-usa.com/dcon_utility_pro.html
1. Introduction
I-7067 is a 7-channel Relay Output Data Acquisition Module for signal conditioning
system monitoring. Providing safe value settings, I-7067 is a cost-effective solution for a
wide range of industrial control signals and systems. The DCON utility can help users to
configure and test I-7067 Relay Output module. The various library functions and demo
programs it provides makes it easy for users to develop programs in Windows, Linux
and DOS operating systems. I-7067 communicates over Modbus protocol via RS-485.
Users can mount the module on a DIN rail, panel or wall. Modules have a screwterminal block to connect to the signals. The I-7067 relay output data acquisition module
can be used in various applications such as industrial automation and control, factory
automation, remote monitoring, etc.
2. Terminal Assignment
I-7067 - 7 Channel Relay Output DAQ Module - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
3. Block/ Wiring Diagram
4. Default Settings
。 Module Address: 01
。 DIO Type: Type 40
。 Baud Rate: 9600 bps
。 Checksum disabled
。 J3 set to INIT mode enabled
I-7067 - 7 Channel Relay Output DAQ Module - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
5. Configuration
To install the module, follow the steps below:
1. Connect the relay output.
2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals. If
the host is only equipped with an RS-232 interface, then an RS-232 to RS-485
converter will be required.
3. Connect the module to the power supply using the +Vs and GND terminals. Note that
the voltage supplied should be in the range of +10 to +30V DC.
I-7067 - 7 Channel Relay Output DAQ Module - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
Loading...