ICP DAS GW-2212i, GW-2222i, GW-2232i, GW-2215i, GW-2225i User Manual

...
Version: 1.0/ Updated: Jun. 2020
GW-2200
Firmware Update via Ethernet
Website: http://www.icpdas.com
Ch. 2. Firmware Update Procedure
Ch. 3. Troubleshooting
Ch. 4. Additional Information
Ch.1. Setting up the GW-2200 Series
SUPPORT
Models supported include GW-2212i, GW-2222i, GW-2232i, GW-2215i, GW-2225i, GW-2235i
WARRANTY
All products manufactured by ICP DAS are warranted
against defective materials for a period of one year from
WARNING
ICP DAS assumes no liability for damages consequent to
the use of this product. ICP DAS reserves the right to
change this manual at any time without notice. The
information furnished by ICP DAS is believed to be
accurate and reliable. However, no responsibility is
Series
assumed by ICP DAS for its use, nor for any infringements
of patents or other rights of third parties resulting from its
use.
COPYRIGHT
Copyright © 2020 by ICP DAS. All rights are reserved.
TRADEMARKS
Names are used for identification purposes only and may
be registered trademarks of their respective companies.
CONTACT US
If you have any questions, please feel free to contact us.
We will respond within 2 working days.
Email: service@icpdas.com
ICP DAS CO., LTD.
1. Setting up the GW-2200 Series
Before updating the firmware, please ensure that the network settings for both your host computer and any GW-2200 series modules are correctly configured, or the update procedures via the Ethernet network may not function correctly.
Step 1: Connect the GW-2200 series to the same hub or the same sub-network as your Host
PC, and attach a power supply to the GW-2200 series. Do not connect the GW-2200 series
to a router or directly to the Internet as this may cause the update process to fail.
Please refer to Chapter 3-Connecting the Power and Host PC” in the GW-2200 Quick Start Guide for more
detailed information.
Download the Quick Start Guide.
Step 2: Install the eSearch Utility on your
Host PC, and then run the Utility to search
for any GW-2200 series modules
connected to the network.
Download the eSearch Utility.
Step 3: Configure the correct
network settings for the required
GW-2200 series module.
Please refer to Chapter 4-Configuring Ethernet Settings” in the GW-2200 Quick Start Guide. If the IP address
settings do not work correctly, please refer to note1 (Page 18).
Download the Quick Start Guide.
GW-2200 Series Firmware Update via Ethernet (Ver. 1.0/Mar. 2020) Page: 1
2 3 1
2. Firmware Update Procedure
The firmware update can fail when the computer has multiple network interfaces (e.g., LAN and Wi-Fi).
Therefore, enable only one network interface for updating the firmware, and temporarily turn off other
network interfaces, firewalls, and anti-virus software first.
2.1 GW-2200 Firmware Update
Two methods can be used to update the firmware: Local Firmware Update” (traditional) and
Remote Firmware Update (TeamViewer). The Local Firmware Update method requires the user to
manually adjust the position of the Init/Run Switch and reboot the module in order to initialize the
firmware update. Refer to Section 2.1.1 Local Firmware Update for more details. The Remote
Firmware Update method allows the user to initialize the module via a web interface without
needing to adjust the hardware switch. Initialization via the web interface is useful when the module
is installed at a remote site and can be accessed via the TeamViewer application installed on a
remote PC. Refer to Section 2.1.2 Remote Firmware Update for more details.
2.1.1 Local Firmware Update
Step 1: In the eSearch Utility, click the “Search Servers” button to search the for any GW-2200
modules connected to the network . (The network settings of the GW-2200 module as described
in Step 3 on Page1)
Step 2: Right click on the name of
the GW-2200 module to be updated.
Step 3: Select the “Firmware Update”
item from the popup menu and the
Open dialog box will be displayed.
GW-2200 Series Firmware Update via Ethernet (Ver. 1.0/Mar. 2020) Page: 2
Step 4: In the Open dialog box, select the firmware file (GW2200.dat) that will be
4
5
6
Factory-default MAC Address
Valid IP Address
used to update the module and then click the “Open” button.
Download the Firmware File.
Step 5: Assign a valid IP Address (can be different with the current IP) and the
factory-default MAC Address for the GW-2200 module. If this IP address is invalid (e.g. IP
Address: 0.0.0.0) or a user-defined MAC address is assigned. Refer to note 2 (Page 18) and
note 3 (Page 19) for more details.
Step 6: Click the “OK” button.
GW-2200 Series Firmware Update via Ethernet (Ver. 1.0/Mar. 2020) Page: 3
Waiting for a request from the GW-2200
Firmware update begins
Request received from this MAC Address
Waiting for a request from this MAC Address
Step 7: You are now ready to update the firmware. A Command Prompt windows will
be displayed the progress of the update.
module to begin updating the device
Step 8: Set the “Init Switch” on the
GW-2200 module to the “Init” position.
Step 9: Power-on reset the GW-2200 module in “Init Mode” to initiate the update.
Step 10: Confirm that the two MAC addresses (factory-default) listed in the Command Prompt
window, “Waiting request from MAC x.x.x.x and BOOTPREQ from MAC: x.x.x.x”, are the
same, as indicated in the image below. If these addresses do not match, the update cannot
proceed. Refer to note4 (Page 19) below for more details.
GW-2200 Series Firmware Update via Ethernet (Ver. 1.0/Mar. 2020) Page: 4
13
14
15
Step 11: Once the update is complete (i.e.,
when the progess indicator reaches 100%), set
the “Init Switch” to the “Run” position.
Step 12: Power-on reset the GW-2200 module
to operate the module in “Run Mode”.
Step 13: In the eSearch Utility, search for the GW-2200 module again to verify that it is
functioning correctly. Note that the network settings for the module may need to be
reconfigured after updating the firmware. Refer to Step 3 in Chapter 1 above for more
details.
Step 14: Click the name of the GW-2200 module to highlight it.
Step 15: Click the “Web” button and the default web browser will be opened.
GW-2200 Series Firmware Update via Ethernet (Ver. 1.0/Mar. 2020) Page: 5
Loading...
+ 14 hidden pages