1
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Industrial Quad-band GPRS/GSM Modem
GTM-201 Series
User Manual
Warranty
All products manufactured by ICP DAS are warranted against
defective materials for a period of one year from the date of delivery
to the original purchaser.
Warning
ICP DAS assumes no liability for damages consequent to the
use of this product. ICP DAS reserves the right to change this
manual at any time without notice. The information furnished by ICP
DAS is believed to be accurate and reliable. However, no
responsibility is assumed by ICP DAS for its use, or for any
infringements of patents or other rights of third parties resulting from
its use.
Copyright
Copyright 2009 by ICP DAS Co., LTD. All rights reserved
worldwide.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
Publication Jul, 2013 Ver.
1.06
2
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Table of Contents
Chapter 1 Introduction .................................................... 3
Chapter 2 Hardware Specifications ............................... 4
2.1 GTM-201 Series ........................................................................ 4
2.2 GTM-201 Specifications ......................................................... 5
Chapter 3 Application architecture ................................ 7
3.1 Application 1.............................................................................. 7
3.2 Application 2.............................................................................. 7
3.3 Application 3.............................................................................. 8
3.4 Application 4.............................................................................. 8
Chapter 4 Hardware Appearance ................................... 9
4.1 View of the GTM-201-RS232 and GTM-201-USB Panel .. 9
4.2 Pin Assignments .................................................................... 10
4.3 Hardware Dimensions .......................................................... 11
4.4 LED indicators ........................................................................ 12
Chapter 5 Hardware Wire Connection ......................... 13
5.1 Reset Wire Connection ......................................................... 13
5.2 GSM/GPRS Installation ......................................................... 14
5.3 Quick Test ................................................................................ 15
Chapter 6 GPRS connection ......................................... 21
6.1 XPAC – 8000 (Microsoft Windows XP) ............................. 21
6.2 WinPAC-8000 (WinCE) .......................................................... 36
6.3 LinPAC – 8000 (Linux) .......................................................... 47
Chapter 7 USB driver installation ................................ 51
7.1 XPAC – 8000 (Microsoft Windows XP) ............................. 51
7.2 WinPAC – 8000 (WinCE) ....................................................... 59
7.3 LinPAC – 8000 (Linux) .......................................................... 60
Chapter 8 Software Reset ............................................. 61
8.1 Software Reset (for GTM-201-RS232) ............................... 61
Publication Jul, 2013 Ver.
1.06
3
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Chapter 1 Introduction
The GTM-201 series are industrial Quad-band GSM/GPRS modems with RS-232 and USB
interfaces that work on frequencies of GSM 850 MHz, EGSM 900 MHz, DCS 1800 MHz and PCS
1900 MHz. The modems utilize the GSM/GPRS network for convenient and inexpensive data
transfer from remote instruments, meters, computers or control systems in either live data or packet
data. GTM-201 series have the integrated TCP/IP stack so that even simple controllers with serial
communications ports can be connected to the modem without the need for special driver
implementation. With the features of GTM-201 series, the systems can be SMS and GPRS
connection applications with various PLC and PC. Moreover, with the voice interface, these
modems can also be applied to the alarm system with sounds.
Publication Jul, 2013 Ver.
1.06
4
Model: GTM-201-RS232
Model: GTM-201-USB
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 2 Hardware Specifications
2.1 GTM-201 Series
GTM-201 Series User Manual
Publication Jul, 2013 Ver.
1.06
5
Models
GTM-201-RS232
GTM-201-USB
GSM/GPRS System
GPRS/GSM
Quad-band
850/900/1800/1900 MHz
GPRS Multi-slot
Class 10/8
GPRS Mobile
Station
Class B
GPRS Class 10
Max. download speed 85.6 kbps
CSD
Up to 14.4 kbps
Compliant to GSM
Phase 2/2+
Class 4 (2 W @ 850/900 MHz); Class 1 (1 W @ 1800/1900 MHz)
Coding Schemes
CS 1, CS 2, CS 3, CS 4
SMS
Text and PDU Mode
Serial Ports
Serial Standards
RS-232 (DB9 Female)
USB (B-TYPE) to RS232(VCP)
RS-232
TxD, RxD, RTS, CTS, DTR,
DSR, DCD, RI, GND
TxD, RxD, DTR, DSR, DCD, RI,
GND
Baud Rate
9600 bps ~ 115200 bps
Include Cable
RS-232 9-Pin Female to Male
cable(CA-0915)
USB Type A to Type B cable
(CA-USB18)
Compatibility
-
USB 1.1 and 2.0 standard
USB Driver
Support
-
Windows 98 and 2000
Windows XP and XP 64-bit
Windows Vista and Vista 64-bit
WinPAC(WinCE 5.0)
LinPAC(Linux kernel 2.6)
Reset Input
Input Type
Isolated, 3750 V
rms
On Voltage Level
+3.5 VDC ~ +30 V
DC
Off Voltage Level
+1V max.
Input Impedance
3 kΩ, 0.25 W
LED Indicators
Power
Red color
GSM/GPRS
Green color
Power
Protection
Power reverse polarity protection
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
2.2 GTM-201 Specifications
GTM-201 Series User Manual
Publication Jul, 2013 Ver.
1.06
6
Frame Ground
Protection
ESD, Surge, EFT, Hi-Pot
Required Supply
Voltage
+10 VDC ~ +30 VDC
Power
Consumption
Idle: 25 mA @ 24 VDC; Data Link: 100 ~ 400 mA (peak) @ 24 VDC
Connection
5-Pin 3.81 mm Removable Terminal Block
Mechanical
Casing
Plastic
Flammability
UL 94V-0 materials
Dimensions
(W x L x H)
33 mm x 87 mm x 107 mm
Installation
DIN-Rail
Environment
Operating
Temperature
-25 °C ~ +55 °C
Storage
Temperature
-40 °C ~ +80 °C
Humidity
5 ~ 95% RH, non-condensing
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Note1: The baud rate of GTM-201-RS232 and GTM-201-USB are default in
115200 bps.
Publication Jul, 2013 Ver.
1.06
7
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 3 Application architecture
3.1 Application 1
GTM-201 Series User Manual
3.2 Application 2
Publication Jul, 2013 Ver.
1.06
8
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
3.3 Application 3
GTM-201 Series User Manual
3.4 Application 4
Publication Jul, 2013 Ver.
1.06
9
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Chapter 4 Hardware Appearance
4.1 View of the GTM-201-RS232 and GTM-201-USB Panel
GTM-201-RS232 :
GTM-201-USB :
Publication Jul, 2013 Ver.
1.06
10
RESET
RST+
RST-
Frame Ground
F.G.
Power Input:
+10 ~ 30VDC
DC.GND
DC.+VS
SW1-Operation Mode
None
No
Handshaking
3-wire RS-232
RTS/CTS
Hardware
Handshaking
9-wire RS-232
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
4.2 Pin Assignments
GTM-201 Series User Manual
Publication Jul, 2013 Ver.
1.06
11
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
4.3 Hardware Dimensions
GTM-201-RS232
GTM-201 Series User Manual
GTM-201-USB
Publication Jul, 2013 Ver.
1.06
12
Power normal
Power fail
Always on
Always off
Modem normal
Modem fail
Blanking (3 sec)
Off
or
Blanking (not 3 sec)
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
4.4 LED indicators
There are two LED indicators to help users to judge the various conditions of GTM-201.
The description is as follows：
PWR(Red)：The PWR LED can indicate the status of Power module.
GSM (Green)：The modem LED can indicate the status of GSM module.
Publication Jul, 2013 Ver.
1.06
13
Input Type
Reset State ON
Reset State OFF
Reset
Input
Reset Input
ON Voltage Level
+3.5 VDC ~ +30 VDC
OFF Voltage Level
+1 VDC max.
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 5 Hardware Wire Connection
5.1 Reset Wire Connection
Reset Wire Connection
GTM-201 Series User Manual
Timing of restart modem
Publication Jul, 2013 Ver.
1.06
14
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
5.2 GSM/GPRS Installation
SIM card Installation
GTM-201 Series User Manual
GPRS/GSM Antenna Installation
Publication Jul, 2013 Ver.
1.06
15
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
5.3 Quick Test
Hardware installation :
GTM-201 Series User Manual
Publication Jul, 2013 Ver.
1.06
16
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Software Installation: (Hyper Terminal)
Step1. Start → All Programs → Accessories → Communications → Hyper Terminal
Step2. If these is a pop-up form that “Default Telent Program?”, please select “Yes”
Publication Jul, 2013 Ver.
1.06
17
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step3. Input new connection name → Click “OK”
GTM-201 Series User Manual
Step4. Select your PC serial port → Click “OK”
Publication Jul, 2013 Ver.
1.06
18
Bits per second
115200
Data bits
8
Parity
None
Stop bits
1
Flow control
None (Note)
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step5. Please refer to the following settings
Note: Please select “None” mode on the GTM-201-RS232 SW1 Hardware
Step6. File → Properties
Publication Jul, 2013 Ver.
1.06
19
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step7. Settings → Click “ASCII Setup…”
GTM-201 Series User Manual
Step8. Select “Echo typed character locally” → OK
Publication Jul, 2013 Ver.
1.06
20
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step9. Input “AT” and press “Enter”, then you will receive “AT OK”
Publication Jul, 2013 Ver.
1.06
21
Chapter 6 GPRS connection
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.1 XPAC – 8000 (Microsoft Windows XP)
6.1.1.1 GTM-201-RS232 Hardware requirement
1) GTM-201-RS232
2) XPAC-8000
3) RS-232 Cable
GTM-201 Series User Manual
6.1.1.2 GTM-201-USB Hardware requirement
1) GTM-201-USB (Please install USB driver first)
2) XPAC-8000
3) USB Cable
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
22
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.1.2.1 Create a new modem connection
Step1. Control Panel → Double-click “Phone and Modem Options”
Step2. Set the area code for the first time → Click “OK”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
23
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step3. Control Panel → Double-click “Phone and Modem Options” → Modem → Click
“Add”
Step4. Select “Don‟t detect my modem; I will select it from a list.” → Click “Next”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
24
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step5. Select ”Standard Modem Types” → Select “Standard 19200 bps Modem”
→ Click “Next”
Step6. Select your COM Port to connect to the modem → Click “Next”
Publication Jul, 2013 Ver.
1.06
25
Step7. Click “Finish” to finish the install new modem.
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step8. Control Panel → Double-click “Phone and Modem Options” → Modem →
Select “Standard 19200 bps Modem” → Click “Properties”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
26
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step9. Control Panel → Double-click “Phone and Modem Options” → Modem →
Select “Standard 19200 bps Modem” → Click “Properties” → Modem →
Maximum Port Speed → 115200
Step10. Advanced → Extra initialization commands:
Note: GPRS‟s APN must be provided from your Telecom. CO., LTD.
For example in Taiwan: AT+CGDCONT=1,”IP”,”INTERNET”
For example in China: AT+CGDCONT=1,”IP”,” CMNET”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
27
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step11. Diagnostics → Query Modem →Click “OK”
Note: If user queries modem that gets a Error, Please try again.
Step12. Click “OK”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
28
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.1.2.2 Create a new dial-up and networking connection
Step1. Control Panel → Network Connections → Click “Create a new connection”
Step2. Click “Next”
Publication Jul, 2013 Ver.
1.06
29
Step3. Select “Connect to the Internet” → Click “Next”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step4. Select “Connect using a dial-up modem” → Click “Next”
Publication Jul, 2013 Ver.
1.06
30
Step5. ISP Name → Your GPRS‟s name → Click “Next”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step6. Phone Number: → Click “Next”
Note: Phone Number must be provided from your Telecom. CO., LTD.
For example in Taiwan: *99***1#
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
31
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step7. GPRS‟s User name and GPRS‟s Password → Click “Next”
Note: GPRS‟s User name and GPRS‟s Password must be provided from your Telecom.
CO., LTD.
Step8. Click “Finish”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
32
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step9. Contral Panel → Network Connections → Click “Your GPRS‟s name” →
File → Properties
Step10. General → Select”Standard 19200 bps Modem” → Click “Configure”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
33
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step11. Maximum speed(bps) → Select ”115200” → “Enable hardware flow control
“(Note) → Click “OK”
Note1：SW 1 on GTM-201-RS232 is “RTS/CTS” mode → Please select “Enable
hardware flow control”
Note2：GTM-201-USB → Please don’t select “Enable hardware flow control”
Publication Jul, 2013 Ver.
1.06
34
Step12. Click “OK”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step13. Contral Panel → Network Connections → Double-Click “Your GPRS‟s name”
Publication Jul, 2013 Ver.
1.06
35
Step14. Click “Dial”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step15. If you connect to internet successfully, your toolbar have new logo
Step16. You can Double-Click the new logo → Click “Details” → Get your IP address
Publication Jul, 2013 Ver.
1.06
36
6.2 WinPAC-8000 (WinCE)
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.2.1.1 GTM-201-RS232 Hardware requirement
1) GTM-201-RS232
2) WinPAC-8000
3) RS-232 Cable
GTM-201 Series User Manual
6.2.1.2 GTM-201-USB Hardware requirement
1) GTM-201-USB (About install USB driver, please refer to the
GTM-201-USB_Install_driver_manual. After finishing installing the
driver, it will add a com port on WinPAC.)
2) WinPAC-8000
3) USB Cable
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
37
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.2.2.1 Create a new modem connection
Step1. Copy “ICPDAS GTM-201-RS232_COM4_winpac.cab” to your WinPAC →
Double-Click ” ICPDAS GTM-201-RS232_COM4_winpac.cab” to install →
Select “OK”
Step2. Execute “WinPAC_Utility” → File → Save and Reboot
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
38
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.2.2.2 Create a new dial-up and newworking connection
Step1. Control Panel → Double-Click ”Network and Dial-up Connections”
Step2. Double-Click ”Make New Connection”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
39
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step3. Keyin your name for the connection → Select “Dial-Up Connection” →
Click ”Next”
Step4. Select “ICPDAS GTM-201-RS232 COM4:” → Click “Configure…”
Note: If your device is GTM-201-USB, please select “ICPDAS GTM-201-USB COM5:”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
40
GTM-201-RS232 “RTS/CTS” mode
Please select “Hardware”
GTM-201-RS232 “None” mode
Please select “None”
GTM-201-USB
Please select “None”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step5. Select Baud Rate “115200”, Data Bits “8”, Parity “None”, Stop Bits “1” Note→ Click
“Call Options”
Note:
Step6. Extra Settings → Click “OK”
Note: GPRS‟s APN must be provided from your Telecom. CO., LTD.
For example in Taiwan: +CGDCONT=1,”IP”,”INTERNET”
For example in China: +CGDCONT=1,”IP”,” CMNET”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
41
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step7. Click “TCP/IP Settings…”
Step8. TCP/IP Settings: Dependant on the requirement of each ISP.
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
42
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step9. Click “Security Settings…”
Step10. Security Settings: Dependant on the requirement of ISP！Below picture is the
setting for HINET.
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
43
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step11. Click “Next”
Step12. Phone Number: → Click “Finish”
Note: Phone Number must be provided from your Telecom. CO., LTD.
For example in Taiwan: *99***1#
Publication Jul, 2013 Ver.
1.06
44
Step13. Double-Click you make new connection name
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step14. Click “Dial Properties…”
Publication Jul, 2013 Ver.
1.06
45
Step15. Click “Dialing Patterns…”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step16. Keyin „G‟ to all blocks → Click “OK”
GTM-201 Series User Manual
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
46
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step17. GPRS‟s User name and GPRS‟s Password → Click “Connect”
Note: GPRS‟s User name and GPRS‟s Password must be provided from your Telecom.
CO., LTD.
Step18. If you connect to internet successfully, they will show “Connected”
Step19. Execute “WinPAC_Utility” → File → Save and Reboot
Publication Jul, 2013 Ver.
1.06
47
6.3 LinPAC – 8000 (Linux)
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.3.1.1 GTM-201-RS232 Hardware requirement
1) GTM-201-RS232
2) LinPAC-8000
3) RS-232 Cable
GTM-201 Series User Manual
6.3.1.2 GTM-201-USB Hardware requirement
1) GTM-201-USB (Please install USB driver first)
2) LinPAC-8000
3) USB Cable
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
48
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
6.3.2.1 GTM-201-RS232
If users want to connect the gprs modem to the COM4 of LinPAC-8000, users should
modify /etc/ppp/peers/wavecom to define COM port first. Please follow the steps as
below :
(1) Type “ vi /etc/ppp/peers/wavecom ”
(2) To find the “Serial device to which the GPRS phone is connected:” statement, and
add device name of COM port.
Modify “/etc/ppp/peers/wavecom”
……
……
# Serial device to which the GPRS phone is connected:
# /dev/ttyS0 for serial port (COM1 in Windows),
# /dev/ircomm0 for IrDA,
# /dev/ttyUB0 for Bluetooth (Bluez with rfcomm running) and
# /dev/ttyUSB0 #for USB
/dev/ttyS34 # serial port one
# /dev/ttyS0 # serial port one
# /dev/ttyS1 # serial port two
……
……
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
49
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
(3) Type “ :wq “ to save and quit the script.
The default GPRS baudrate is “ 115200 ” in the LinPAC, so if users finish the setting
of gprs modem and connect the gprs modem to the COM port of LinPAC-8000, just type in
“ pppd call wavecom ” and then LinPAC-8000 will be connected to the internet
automatically. Remember that the network interface card of LinPAC should stop first, just
type in “ ifdown eth0 ” to stop it. If users type in “ ifconfig ” will see the “ ppp0 ” option.
6.3.2.2 GTM-201-USB
If users want to connect the gprs modem to the USB of LinPAC-8000, users should modify
/etc/ppp/peers/wavecom to defineUSB first. Please follow the steps as below :
(1) Type “ vi /etc/ppp/peers/wavecom ”
(2) To find the “Serial device to which the GPRS phone is connected:” statement, and
add device name of USB.
Modify “/etc/ppp/peers/wavecom”
……
……
# Serial device to which the GPRS phone is connected:
# /dev/ttyS0 for serial port (COM1 in Windows),
# /dev/ircomm0 for IrDA,
# /dev/ttyUB0 for Bluetooth (Bluez with rfcomm running) and
/dev/ttyUSB0 #for USB
#/dev/ttyS34 # serial port one
# /dev/ttyS0 # serial port one
# /dev/ttyS1 # serial port two
……
……
(3) Type “ :wq “ to save and quit the script.
The default GPRS baudrate is “ 115200 ” in the LinPAC, so if users finish the setting
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
50
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
of gprs modem and connect the gprs modem to the USB of LinPAC-8000, just type in
“ pppd call wavecom ” and then LinPAC-8000 will be connected to the internet
automatically. Remember that the network interface card of LinPAC should stop first, just
type in “ ifdown eth0 ” to stop it. If users type in “ ifconfig ” will see the “ ppp0 ” option.
Remark: Please check O.S version. We have supported the GTM-201-USB module
after O.S version 1.2.
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
51
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 7 USB driver installation
7.1 XPAC – 8000 (Microsoft Windows XP)
7.1.1 Automatically install usb driver
Step1. Connect the GTM-201-USB and XPAC hardware with the USB cable, then power
on.
Step2. If pop up a new window that “Found New Hardware Wizard”, please select “Cancel”
Step3. Double-click GTM-201-USB driver that “GTM-201-USB_v1.xx.exe”.
Publication Jul, 2013 Ver.
1.06
52
Step4. Select “Next”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step5. Select install folder → Select “Next”
Publication Jul, 2013 Ver.
1.06
53
Step6. Select “Install”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step7. If the installation process has popped up new window that “Software Installation”,
please select “Continue Anyway”
Publication Jul, 2013 Ver.
1.06
54
Step8. Select “Finish”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step9. Please open “Device Mansger” → check com port
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
55
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
7.1.2 Manually install usb driver
Step1. Please install “GTM-201-USB_v1.xx.exe” first.
Step2. Connect the GTM-201-USB and XPAC hardward with usb cable , then power on
them.
Step3. Select “No, not this time” → Select “Next”
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
56
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step4. Select “Install from a list or specific location (Advanced)” → Select “Next”
Step5. Select “Include this location in the search:” → Select “Browse” →
Select “C:\ICPDAS\GTM-201-USB” → Select “OK”
Publication Jul, 2013 Ver.
1.06
57
Step6. Select “Next”
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step7. If it is pop-up a new windows that “Hardware Installation”, please select
“Continue Anyway”
Publication Jul, 2013 Ver.
1.06
58
Step8. Select “Finish” to finish the usb driver installation.
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Step9. Please open “Device Mansger” → check com port
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
59
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
7.2 WinPAC – 8000 (WinCE)
Step1. Copy “ICPDAS GTM-201-USB_COM5_WinPac.cab” to your WinPAC →
Double-Click ” ICPDAS GTM-201-USB_COM5_WinPac.cab” to install →
Select “OK”
Step2. Execute “WinPAC_Utility” → File → Save and Reboot
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
60
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
7.3 LinPAC – 8000 (Linux)
Please install usb driver first and follow the command as below:
Type “insmod ftdi_sio”
Remark: Please check O.S version. We have supported the GTM-201-USB module
after O.S version 1.2.
Publication Jul, 2013 Ver.
1.06
GTM-201 Series User Manual
61
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Chapter 8 Software Reset
8.1 Software Reset
8.1.1 We Provide a Software Reset command for the user to reset the modem.
Step1. Please open Hyper Terminal, and open the COM Port of the GTM-201.
Step2. type the command “@ICPDASRESET”, and then don‟t send any data to GSM
modem in 100ms. The modem will be reset.
Publication Jul, 2013 Ver.
1.06
62
Revised Note:
Version
By
Date
Description
1.00
Yide
2009/06/02
Release
1.01
Yide
2009/07/28
Release
1.0.2
Yide
2009/11/17
Modify
1.0.3
Yide
2009/12/31
Modify
1.04
Yide
2010/05/19
Modify
1.05
Malo
2012/3/27
Add chapter 8
1.06
Malo
2013/07/25
Add Soft Reset
Command for
GTM-201-USB
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
GTM-201 Series User Manual
Publication Jul, 2013 Ver.
1.06
Loading...