ICPDAS FSM-510G-2F, FSM-510G-4F Quick Start Manual

FSM-510G Ethernet Management Switch - QuickStart (Aug/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

1

FSM-510G Series

Ethernet Management Switch

Quick Start Guide

Overview

The Management Ethernet Switch solutions are designed for supporting standard
industrial applications. Managed switches are easily to prioritize partition and
organize user’s network and provide reliable and good quality services.
The switch can be managed through RS-232 serial port via direct connection, or
through Ethernet port using Telnet or Web-Based management unit, associated with
SNMP agent. With the SNMP agent, the network administrator can log on the switch
to monitor, configure and control each port activity in a friendly way. The overall
network management is enhanced and the network efficiency is also improved to
accommodate high bandwidth applications. The switch features comprehensive and
useful functions such as QoS (Quality of Service), Spanning Tree, VLAN, Port
Trunking, Bandwidth Control, Port Security, SNMP/RMON.

Models

L2+ Managed Switch

FSM-510G-2F

FSM-510G-4F

Total GE Ports

10 10

10/100/1000

8

6

BaseT(X)

100/1000 Base SFP 2 4

Safety Instructions

When a connector is removed during installation, testing, or servicing, or when an
energized fiber is broken, a risk of ocular exposure to optical energy that may be potentially
hazardous occurs, depending on the laser output power.

The primary hazards of exposure to laser radiation from an optical-fiber
communication system are:

Damage to the eye by accidental exposure to a beam emitted by a laser source.

Damage to the eye from viewing a connector attached to a broken fiber or an
energized fiber.

FSM-510G Ethernet Management Switch - QuickStart (Aug/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

2

Specifications

Model

FSM-510G Series

Ethernet

Copper RJ45 Ports

10/100/1000 Mbps speed auto-negotiation

MDI/MDIX Auto-crossover

SFP (pluggable)

100/1000Base SFP slot

Ports

Fiber port connector

LC typically for fiber (depends on module)

Power

Power input

Redundant Input Terminals; Reverse power protection

Input voltage range

+12-48 VDC

Maximum Power

10.5W

consumption
Environmental and Compliances

Operating

-40 to +75°C

temperature

Storage temperature

-40 to +85°C

Humidity

5 to 95% RH (non-condensing)

Mechanical

Ingress protection

IP30

Dimension

154mm(H) x 109mm(L) x 60mm(W)

(without DIN rail clip)

Installation option

DIN-Rail mounting

Wall mounting

FSM-510G Ethernet Management Switch - QuickStart (Aug/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1 -310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3

Faceplate

10-Port series

DIN-Rail Mounting

Mounting step:

1. Screw the DIN-Rail bracket on with the bracket and screws in the accessory kit.

2. Hook the unit over the DIN rail.

3. Push the bottom of the unit towards the DIN Rail until it snaps into place.