ICPDAS ACS-11P-MF, ACS-10V-MF, ACS-11-MF Quick Start Manual

ACS-11P-MF Quick Start v1.0 2017/08

1/8

Quick Start

「 ACS-11P-MF」Package Checklist

The package includes the following items:

 One ACS-11P-MF module
 One Quick Start
 One software utility CD
 Cables(CA-012x2, CA-013x1, CA-019x1, CA-020x1)

Note:

If any of these items are missed or damaged, contact the local distributors

for more information. Save the shipping materials and cartons in case you
want to ship in the future.

 Pin assignments

Table 1: Connector Pin Assignment

Connector Type

Pin Assignment

Description

CN1

(CA-019)

D+

D-

RS-485(D+/D-)
Baud Rate (bps): 9600
Parity: NONE, Data Bits: 8, Stop Bits: 1

CN2

(CA-020)

DI0 G DI1

G

DI0(Door position detection)
DI1(Electric lock trigger)
(Digital Input, Dry Contact)

CN3

(CA-012)

NC

Electronic lock control
(Relay Output)

COM

NO

CN4

(CA-012)

NC

Door position alarm output
(Relay Output)

COM

NO

CN5

(CA-013)

COM

NO

NC

Anti-sabotage detection
(Relay Output)

ACS-11P-MF Quick Start v1.0 2017/08

2/8

 Hardware Installation

Figure 1: Wiring diagram

Figure 2: Wire connection

ACS-11P-MF Quick Start v1.0 2017/08

3/8

 Software Installation

Before use, associated software configuration, the steps described as

follows：

Connect to host PC, network and power supply

Figure 3: Host PC, Network and Power supply

01. Make sure that the network settings on the PC are properly configured
and functioning properly

a. Entry the IP address as "192.168.0.x", where "x" is a number

Between 1 and 254 except 1, Subnet mask as "255.255.0.0".
Finally, press "OK" button.

Figure 4: IP address configuration of Computer

02. Make sure that Windows Firewall or antivirus firewall is properly
configured to allow incoming connections, or temporarily disable these
features