Page 1
LPX Form Factor Motherboard with Intel®Pentium®
4/Celeron® D LGA775 800MHz,Daul GbE, SATA, IDE, USB
2.0, 6XCOM and Audio
POS-6614
Quick Installation Guide
Version 1.0
Aug. 20, 2006
Package List
POS-6614 package includes the following items:
z 1 xPOS-6614 Single Board Computer
z 1 xATA66/100 Flat Cable
z 1 xDual RS-232 Cable
z 2 xSATA Cable
z 1 xSATA Power Cable
z 1 x mini jumper pack
z 1 x Utility CD
z
1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.
8 1
Page 2
Specifications
zCPU: LGA775 Inter® Pentium® 4/Celeron® D support 800/533
MHz FSB up to 3.4GHz.
z
System Chipset: SiS 661CX+SIS966
zBIOS: AMI BIOS
z
System memory: 2x 184-pin DDR 333/400MHz up to 2GB
z
Ethernet;!Dual RTL8110SC GbE
z
I/O
8 x USB 2.0
5 x RS-232
1 x RS-232/422/485
1 x CFII
2 x IDE
1 x FDD
1 x LPT
2 x SATA-150 with RAID 0,1, function support
1 x PS/2 for KB/MS
1 x IrDA
z Expansion: 1xPCI
1xPCI-E x 4 connector with one PCI-E x 1 support
z Digital I/O: 8 bit digital l /O,4 input/ 4 output
z Supper I/O: W83697HG
z Audio:
Realtek ALC655 with AC'97 Codec
z Display: - CRT integrated in SiS 661CX
- Daul channel 24-bit LVDS by SiS 302LV
zWDT: Software programmable supports 1-255 sec. System reset
zPower Supply: ATX Support
z
Power Consumption
5V@2.84A,+12V@7.12A,+3.3V@3.48A
(Pentium®4 3.0GHz/800MHz,DDR 400MHz 1GB*2)—3D MARK
z Temperature: Operation:0~60°C(32~140°F)
z
Humidity: Operation:5%~90% non-condensing
z Dimension: 235mm x 220mm
z Weight: GW: 1000g; NW: 500g
!
2
7
Page 3
Board Layout: Jumper and Connector Locations
Ordering Information
z
POS-6614-R10
POS-6614 CPU Board with inter® Pentium® 4 LGA775 FSB
800MHz, VGA, PCI-E GbE, SATA and Audio
z CF-520-RS:CPU Cooler
z CB-USB02-RS: USB cable
z
PCIER-01-R10
PCI and PCIE riser card with PCI ,PCI-E x 1 slot and PCI Express.
z
32200-000017-RS:FDD Cable
Jumpers setting and Connectors
J_CMOS1 : Clear CMOS Setup
J_CMOS1
1-2
(default)*
Short 2-3 Clear CMOS Setup
J_COM_Vx : Set pin9 of
COMx voltage
1-2 +5V
2-3 +12V
J_COM2_SEL1, J_COM2_SEL2 : COM2 mode select
(RS-232/422/485)
J_COM2_SEL1 J_COM2_SEL2 COM2 mode
1–2, 4–5, 7–8, 10-11 1 - 2 RS-232
2–3, 5–6, 8–9, 11-12 2 - 3 RS-422
2–3, 5–6, 7–8, 10-11 2 - 3 RS-485
J_VLVDS1 : Set The Panel
Voltage
J_LVDS1 DESCRIPTION
1-2
(default)*
Short 2-3 Set The Voltage Level Of
DESCRIPTION
Keep CMOS Setup
(Normal Operation)
Set The Voltage Level Of
Panel To VCC3
Panel To VCC
J_COM_Fx : Set pin9 of
COMx as signal or voltage
1-2 voltage
2-3 RING
J_CF1 :
J_CF1 DESCRIPTION
N/C
(default)*
Short
1-2
Select CF card
as master
Select CF card
as slave
6
3
Page 4
J_SMB1: SMBus
Connector
PIN NO. DESCRIPTION
1 5V
2 SMBCLK
3 SMBDATA
4 GND
IR1: IrDA connector
PIN NO. DESCRIPTION
1 VCC
2 NC
3 IR-RX
4 GND
USB23, USB45, USB67 : Internal USB
Connector
PIN DESCRIPTION PIN DESCRIPTION
1
3
5
7
CD_IN1
PIN NO. DESCRIPTION
1 CD-In L
2 Ground
3 Ground
4 CD-In R
5 IR-TX
6 CIR-RX
COM3~COM6 : Internal Serial Port Connector
PIN NO. DESCRIPTION
1 DATA CARRIER DETECT (DCD)
2 RECEIVE DATA (RXD)
3 TRANSMIT DATA (TXD)
4 DATA TERMINAL READY (DTR)
5 GND (GND)
6 DATA SET READY (DSR)
7 REQUEST TO SEND (RTS)
8 CLEAR TO SEND (CTS)
9 RING INDICATOR (RI)
10 GND (GND)
CPU12V1 : CPU POWER Connector
ATX-12V1 (CPU)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 +12V 4 +12V
VCC
DATA-
DATA+
GND
2
4
6
8
GND
DATA+
DATA-
VCC
LINE_OUT1
PIN NO. DESCRIPTION
1 Line-Out L
2 Ground
3 Ground
4 Line-Out R
Inverterl
PIN NO. DESCRIPTION
1 LCD_ADJ
2 GND1
3 12V
4 GND2
5 BL_EN
LVDS1: LVDS Connector
IN
DESCRIPTION
O.
IN
DESCRIPTION
O.
1 GND1 2 GND2
3 A_Y0 4 A_Y0#
5 A_Y1 6 A_Y1#
7 A_Y2 8 A_Y2#
9 A_CK 10 A_CK#
CPU_FAN1 : CPU Fan
Connector
PIN
NO.
1 Ground
2 +12V
3 Rotation Signal
4 Control
11 A_Y3 12 A_Y3#
13 GND3 14 GND4
15 B_Y0 16 B_Y0#
17 B_Y1 18 B_Y1#
19 B_Y2 20 B_Y2#
21 B_CK 22 B_CK#
23 B_Y3 24 B_Y3#
25 GND5 26 GND6
SYS_FAN1,SYS_FAN2 :
CPU Fan Connector
PIN
NO.
1 Ground
2 +12V
3 Rotation Signal
27 VCC1 28 VCC2
29 VCC3 30 VCC4
DIO1 : Digital Input / Output Connector
PIN
DESCRIPTION
NO.
PIN
DESCRIPTION
NO.
1 Ground 2 VCC
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
F_PANEL1 : External Switches and Indicators panel
PIN DESCRIPTION PIN DESCRIPTION
1 +5V 2 +5V
Power LED
3 N/C 4 N/C
5 GROUND 6 N/C
PWRBTN
HDDLED
7 PWRBTN+ 8 Speaker
9 PWRBTN- 10 N/C
11 +5V 12 Reset13 HDLED- 14 GND
DESCRIPTION
DESCRIPTION
Speaker
RESET
4
5
Loading...