ICP PAM3, PAM348, PAM360, PAM324, PAM342 Owner's Manual

Packaged Air Conditioner
Owner's Guide to Operating and
Maintaining Your Cooling Unit
ELECTRICAL SHOCK HAZARD.
Failure to follow this warning can result in property damage, personal injury, and/or death.
Disconnect power at fuse box or service panel before performing recommended maintenance.
This manual should be left with the owner.
Printed in U.S.A. 10/18/05 426 02 1001 00
EFFICIENT COOLING
Your new unit is among the most energy-efficient and
reliable air conditioning products available today. To
assure its dependability, spend just a few minutes with this
booklet now. Learn about the operation of your air
conditioner and the small amount of maintenance it takes to keep it operating at its peak efficiency.
With minimal care, your air conditioner will provide you and
our family with satisfying home comfort - both now and for ears to come.
Minimum Clearances and Access Panels
Overhang
Evaporator 48" Minimum Overhang Clearance
Access Panel
J
10"around
_" condenser
coilarea
Blower/Ele_rical Access Panel
,,_ Cover Plate
minimum clearance between the outdoor unit and tall
grass, vines, shrubs, et cetera.
Your multipurpose indoor thermostat is the control center for your air conditioning system. You should familiarize yourself with its proper operation. Attempting to control the system by other means - for instance, switching the electrical supply power ON and OFF - may cause damage to the unit.
Thermostat "jiggling" causes rapid-cycling, which is
potentially damaging to the compressor. Do not move the temperature selector on the thermostat for any reason for at least 5 minutes after the compressor has shut off.
You may find that you can maintain greater personal comfort by running the fan continuously. Air pockets can form due to the structure of the building, placement of
registers, et cetera. These air pockets may be too cool or
warm for your liking. Continuous fan operation minimizes any temperature differences. Also, systems equipped with electronic air cleaners and/or humidifiers offer the added benefits of having the air continuously cleaned
year-round, and humidified during the winter season.
Your air conditioner will remove humidity from your home during the cooling season. After a few minutes of operation, you should be able to see water trickle from the condensate drain of the cooling coil. Check this occasionally to be sure the drain system is not clogged.
Of course, don't expect to see much drainage if you live in
a very dry environment.
OPERATING YOUR UNIT
IMPORTANT FACTS
To better protect your investment and to eliminate
unnecessary service calls, familiarize yourself with the
following facts:
Improper installation, adjustment, alteration, service, maintenance or use can cause fire, electrical shock or other conditions which may cause personal injury or property damage.
Refer to this manual. For assistance or additional information consult a qualified installer, service
agency, distributor, or branch. The qualified installer or agency must use only factory authorized kits or accessories when modifying
this product.
Your air conditioning system should never be operated without a clean air filter properly installed. Plan to inspect the filter periodically. A clogged air filter will increase operating costs and shorten the life of the unit.
Supply-air and return-air registers should not be
blocked. Drapes, furniture, and toys are some of the items commonly found obstructing grilles. Restricted
airflow lessens the unit's efficiency and life span.
Outdoor units must have unrestricted airflow. Do not cover the unit, lean anything against it, or stand upon it.
Do not allow grass clippings, leaves, or other debris to
accumulate around or on top of the unit. Maintain a 10-in.
THERMOSTAT
The operation of your air conditioning system is controlled by the indoor thermostat. You simply adjust the thermostat and it maintains the indoor temperature at the level you select. Most thermostats for air conditioning systems have three controls. These are the temperature control selector,
FAN switch, and SYSTEM switch.
The temperature control selector is a dial or button(s) that allows you to establish the degree of temperature that you
wish to maintain for your personal comfort. Some thermostats possess two temperature control selectors: one for setting the temperature desired during the cooling cycle, and one to set the heating operation temperature (if the accessory electric heater is used).
The FAN switch offers two options for controlling the blower: AUTO and ON. When set to AUTO, the blower will
run during the time the air conditioner is operating. When the FAN switch is set at the ON position, the blower will run continuously.
Typically, the SYSTEM switch on your thermostat offers the following selections: COOL, OFF, and HEAT. Your
thermostat may also have a fourth selection, AUTO. The air conditioner will not operate when the SYSTEM switch is
set at the OFF position. With the SYSTEM switch set at COOL, the cooling section of your comfort system will operate when the indoor temperature rises above the level that you wish to maintain. With the SYSTEM switch set at the HEAT position, the accessory electric heater will operate automatically whenever the indoor temperature falls below the level that you have selected.
The AUTO selection found on some thermostats provides for automatic changeover between cooling and heating
Loading...
+ 2 hidden pages