ICP PAC-170 User Manual
PAC-170 CHASSIS
USER’ S MANUAL
--
1
Copyright Notice
This document and product is copyrighted, October 1998, by ICP Electronics Inc. All
rights are reserved. No part of this manual may be reproduced, copied, or translated
without prior notice to ICP Electronics Inc.
The information provided in this document is for reference only. We do not assume
any responsibility arising out of the application of the products. This manual is
subject to change without any notice.
PAC-170, ICP are trademark of ICP Electronics Inc.
--
2
Table of Contents
Chapter 1 Product Information
1.1 General Information
1.2 Product Specifications
1.3 Dimensions
Chapter 2 System Setup
2.1 Front Panel of PAC-170
2.2 Rear Panel of PAC-170
2.3 Removing the chassis cover
2.4 The Backplane and Card Clamp Installation
2.5 Disk Drives Installation
2.6 Replacing the Filter
2.7 Power Supply Installation
2.8 Fan Installation
Appendix A Passive Backplane
Appendix B Exploded Diagram
--
3
Chapter 1 Product Information
1.1 General Information
PAC-170 IPC chassis is a rugged PC/AT compatible computer designed for the
factory floor and other Industrial harsh environment.PAC-170 features 7 slots
Passive Backplanes and high reliability AC Input Power Supply ACE-925A.
The chassis can easily be mounted on panels or walls with the supplied brackets.
1.2 Product Specifications
General specification
- Construction : Heavy-duty steel
- Disk Drive : One 3.5” FDD, One 5.25” CD-ROM and Two 3.5” HDDs
- Indicator : Two LEDs to monitor the status of HDD and Power Supply
- Dimension : 193 x 432 x 254 mm ( WxDxH )
Passive Backplanes (Optional)
BP-7S 7-slot ISA-bus Backplane
IP-7S 7-slot PCISA-bus Backplane
PCI –7S 7-slot ISA/PCI Backplane
Power Supply
Standard equipped power supply for the PAC-170 is : ACE-925A
--
4
Working Environment
- Operating Temperature : 0~50°C
- Relative Humidity : 5~95% Relative
- Vibration : 5-17Hz, 0.1” double amplitude displacement
17-640Hz, 1.5G acceleration peak to peak
- Shock : 10G acceleration peak to peak
- Safety approval : meet CE, FCC
- Shipping Weight : 10Kgs
Cooling Fan
One ball bearing fan for system cooling
Drive Capacity
Supports one 3.5” FDD,one 5.25” CD-ROM, two 3.5” HDDs
--
5
1.3 Dimensions
412.00mm
432.00mm
400.00mm
360.00mm
334.00mm
310.00mm
286.00mm
260.00mm
210.00mm
D10
D5
R2.5
193.00mm
254.00mm
230.00mm
Loading...