ICP HMC024KD Owner’s Manual

ELUXE

MINISPLIT

UAt

SPLIT TYPE ROOM AIR CONDITIONER

• Please read carefully and thoroughly this manual before operating this unit.

° Contact a qualified service technician for

installation, repair and maintenance of this unit.

. The appliance is not intended for use by young

children or infirm persons without super¢ision.

° Young children should be supervised to ensure

that they do not play with the appliance.

CONTENTS

CAUTION ....................................................................................................... 3

PRODUCT COMPONENT IDENTIFICATION ............................................... 4

(1) Feature ................................................................................................... 4

(2) Indoor Unit, Outdoor Unit ...................................................................... 5

(3) Name and Function-Remote Controller(Heating model) ........................ 6

(4) Name and Function-Remote Controller(Cooling model) ........................ 7

(5) Remote Controller Preparation ............................................................. 8

AIR CONDITIONER OPERATION ................................................................ 9

(1) Operation Mode .................................................................................... 9

(2) Operation Procedure ............................................................................. 9

(3) Sleep Mode Auto-Control Setting ......................................................... 15

(4) Airflow Direction Procedure ................................................................. 16

(5) Setting the Present Time ..................................................................... 17

(6) Timer Setting ....................................................................................... 18

(7) Operation Details ................................................................................ 20

FORCED OPERATION ................................................................................ 21

CARE AND MAINTENANCE ...................................................................... 22

OPERATION TIPS ....................................................................................... 24

BEFORE CALLING FOR SERVICE ............................................................ 25

THIS IS NOT MALFUNCTION .................................................................... 26

To warm up the system, power mains must be turned on at least five(5) hou rs

Leave the power ON unless

you will not be using this appliance for an extended period.

Do not use the air conditioner for purposes other than cooling the room.

DOnot use the air conditioner

for other purposes, such as drying clothes, preserving

foods, or cultivating

vegetables.

_lect the most appropriate

Take care to adjust the temperature to suit the

conditions. Rooms occupied

by young infants, the elderly,

or invalids should be kept at

an appropriate temperature.

Do not use heating apparatuses in the vicinity,

The air conditioner's plastic

partsmay melt if exposed to

excessive heat.

PRODUCT COMPONENT IDENTIFICATION

(1) Feature

zASoft Dry Operation Mode

page 12 This mode is designed to dehumidify without

overcooling.

zBAuto O_ration

page11

Inselecting this mode of operation, the

setting temperature, indoor fan speed, and the desired operation mode are automatically set by the unit electronic

control on the basis of the room temperature.

During Auto Operation, pressing the Air-flow

direction control button makes vertical louver swings up and down automatically. Pressing

the Airflow Direction Controi Button wilt set the louvers at a fixed position. Pressing the

Airflow Direction Control Button again will

restore the auto-swing.

Wireless Remote Controller puts

all functions at your fingertips.

zc ONIOFFDual Timer _ing

page 18_19

You can program the room air conditioner to turn itself on or off at a predeterminated time to ensure maximum comfort when you return from being away.

zDSl_p Mode Auto Control

page 15

A touch of the Sleep Mode Button automatically programs the room air

conditioner to control the indoor fan speed, and adjusts the setting temperature to create

a more comfortable sleep.

of handling the Remote Controller

• Aim at the signal receptor on the room air conditioner so as to operate.

•The remote contro_signal can be received at a distance of up to about 7m(23_).

• Be sure that there are no obstructions between the remote controller and the

signal receptor.

Do not drop or throw the remote controlfer. DOnot place the remote controller in a

location exposed to direct sunlight, or near

the heating unit, or any other heat source.

, Block a strong light over the signal re_ptor

with a curtain or etc. so as to prevent the

abnormal operation.

(2) Indoor Unit, Outdoor Unit

I Indoor Unit ]

Air Intake Vent

(front panel)

Air Outlet Vent

Horizontal Airflow Direction Louver

Vertical Airflow Direction Louver

(The air outlet vent opens when the eperation

starts.)

Indoor unit controls

and indicators

-- Open the front panel Pull the panel to

open(te_ and right side of front panel) and open

the panel upward.

Air Filters

(behind front panel)

Force Ope_tion Button Use for operation when the remote controller cannot be used (When eperation is stepped by the remote _ntre] without

removing power pMg, the room air conditioner consumes approximately 2W of electricity_)

--Signal Receptor Receives the signats from the remote controller.

(Signal receiving sound:two short beeps or one tong beep.)

--Operation Indication Lamps O On/Off : Lights up during the air conditioner

s_¢ Sleep Mode : Lights up during Sleep Mode Auto

G Timer : Lights up during timer operation.

Defrost Mode : Lights up during Defrost Mode or hot

6 start operation.

OUT _tdoer Un_ "

DOOR Operation

operation,

operation.

- Heating Model only

Lights up during the outdoor unit's operatien.- Cooling Model only

Power Supply Cord

Controller

Storage

Panel Opening

(]eft and right)

Outdoor Unit]

Air intake Vents

Air Outlet Vent

(Rear)

Piping

Drain Hose

(3) Name and Function-Remote Controller(Heating Model)

Remote Controller

Signal transmitter

Transmits the signals to the room

air conditioner,

zAOperation display

Displays the operation conditions.

zBStart/Stop Button

- Operation starts when this bu_on is pressed, and stops when the button is pressed again,

• The fan blows at low speed when start button is

pressed initially, after a while the fan speed will be reached at the desired speed.

zcOperation Mode _lection Button

Used to select the operation mode.

• Cooling Operation Mode.

• Auto Operation Mode.

• Soft Dry Operation Mode.

• Heating Operation Mode(Heat Pump Only).

_DON Timer Button

Used to set the time of starting operation

zEOFF Timer Button

Used to set the time of stopping operation.

_FTime Setting Button

Used to adjust the time.

1@Timer Set Button

Used to set the timer when the desired time is

obtained,

zHTimer Cancel Button

Used to cancel the timer operation.

zSleep Mode Auto Button

Used to set Steep Mode Auto Operation.

zJAir Circulation Button

Used to circulate room air without cooling.

iH Room Temperature Checking Button

Used to check the room temperature.

zLAirflow Direction Control Button

Used to set the desired vertical airflow direction.

zMR_et Button

(4) Name and Function-Remote Controller(Cooling Model)

Remote Controller

Signal transmitter

Transmits the signals to the room air conditioner

zAO_ration display

Displays the operation conditions.

zBStart/Stop Button

• Operation starts when this button is pressed, and stops when the button is pressed again.

• The fan blows at low speed when start button is pressed initially, after a while the fan speed will be

reached at the desired speed.

zcOperation Mode _lection Button

Used to select the operation mode.

• Cooling Operation Mode. , Auto Operation.

° Soft Dry Operation Mode.

zDON Timer Button

Used to set the time of starting operation.

zEOFF Timer Button

Used to set the time of stopping operation.

/_iTime Setting Button

Used to adjust the time.

zcTimer Set Button

Used to set the timer when the desired time is

obtained.

zHTimer Cancel Button

Used to cancel the timer operation_

I zSleep Mode Auto Button

Used to set Sleep Mode Auto Operation

JAir Circulation Button

Used to circulate room air without cooling or heating_

_KRoom Temperature Checking Button

Used to check the room temperature.

z L Airflow Direction Control Button

Used to set the desired vertical airflow direction.

_MResetButton

(5) Remote Controller Preparation

How to storethe remote controller How to mount onto a wall

Pull the left and the right side to open the front pane_upward.

Store the remote control,

(Remove it when using.)

Press the left and the right side to close

the front panel.

Use the screws to secure the holder to

the wail,

Confirm that the remote control signals can reach

the signat receptor of unit

To attach the remote controller to the holder

To remove,

How to insert bakeries

Remove the battery cover from the remote controller,

. Slide the cover according to the arrow

direction,

Insert the two batteries, . Be sure that the (+) and (-) directions are

correct.

. Be sure that both batteries are new.

Re-attach the cover.

• Slide it back into position.

° Do not use rechargeable

bakeries, such batteries differ from standard dry cells in

shape, dimensions, and performance,

. Romove the batteries from the

remote controller if the air conditioner is not going to be used for some long time.

. Batteries for the remote

controller are type "AAA".

+ 18 hidden pages

ICP HMC024KD Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual