Icotek Rectangular & Square Punches Catalog Page
Rectangular & Square Punches
Sized for Heavy Multi-Pin Industrial Connectors &
icotek Cable Entry Systems
Counter nut
Punch
Die
Type Cut-out Max. For cut-out Order No. PU
size sheet thickness of connector
Punch 22x45 22 x 45 mm 2.5 mm 80059 1
Punch E2 24 x 43 mm 2.5 mm 80055 1
Punch E3 24 x 65mm 2.5 mm 80056 1
Punch E4 24 x 86mm 2.5 mm 80057 1
Punch E5 24 x 112mm 2.5 mm 80058 1
Punch B 46 x 46 mm 3 mm 80050 1
Punch B
for stainless steel V2A
Punch 10 36 x 65 mm 3 mm 10-pin 80051 1
Punch 10
for stainless steel V2A
Punch 16 36 x 86 mm 3 mm 16-pin 80052 1
Punch 16
for stainless steel V2A
46 x 46 mm 2 mm 80150 1
36 x 65 mm 2 mm 10-pin 80151 1
36 x 86 mm 2 mm 16-pin 80152 1
Draw stud
Product Description
Rectangular and square punches and dies make
it easy to punch holes into stainless steel (V2A
versions), mild steel, aluminum or plastics with a
max. sheet thickness of 3 mm (V2A: max. 2 mm).
Available for cut-outs sizes of 10-, 16-, and 24multi-pin heavy industrial connectors and also for
numerous special cut-outs. Therefore, the punches
are suitable for most icotek cable entry systems.
Center punches are integrated in the die for exact
drilling of mounting holes.
The punches are for hydraulic operation only.
Advantages & Bene ts
Center punches for exact drilling of mounting holes
Robust plastic storage case
Suitable for hand hydraulic punch driver by icotek
and other manufacturers
Punch 24 36 x 112 mm 3 mm 24-pin 80053 1
Punch 24
for stainless steel V2A
Punch 24-XL 46 x 112 mm 3 mm 24-pin 80054 1
Punch 24-XL
for stainless steel V2A
36 x 112 mm 2 mm 24-pin 80153 1
46 x 112 mm 2 mm 24-pin 80154 1
Speci cations
Material Steel, hardened and burnished
Scope of delivery
Punch, die and draw stud,
robust plastic storage case
Compatible with
Hydraulic punch driver
186
Loading...