Icotek KVT 80 ATEX Catalog Page
KVT 80 ATEX
Split Cable Glands
Product Description
up to
Type Order No. Cut-out Grommets PU
small | large
The KVT 80 split cable glands are designed for
routing and sealing pre-terminated cables.
By assembling the two frame halves with the
screws provided, the grommets provide su cient
pressure on the routed cables. The KVT 80 can be
tted to a wall thickness from 1.5 mm to 10 mm.
A at rubber gasket is included in the shipment.
Advantages & Bene ts
Insertion of pre-terminated cables
Warranty of pre-terminated cables remains
Easy and fast retro tting and maintenance
High cable density, wide variety of grommets
Fast and easy assembly from the front side
KVT 80|3 ATEX
KVT 80|6 ATEX
49120
49123 ∅ 80 mm 2|1 1
49121
49122
∅ 80 mm 6|- 1
Note
When mounting the KVT 80 on sheet metal, we
recommend the following torque values:
1.5 mm sheet = 1 Nm | 2 - 10 mm sheet = 1.5 Nm
Speci cations
Material
Color
7
Flame class
IP rating
NEMA type rating
Temperature
Equipment group
Category
Zone
Test standard
Properties
Polycarbonate (PC)
gray (similar RAL 7035)
black
UL94-V0
IP54, with gasket and correct
selection of the cable grommets
(certi ed acc. to EN 60529)
NEMA type 12 (acc. to UL 50E)
- 30°C to + 90°C (static)
- 22°F to + 194°F (static
II
2G, 3G, 2D, 3D
1 + 21, 2+22
EN 60079-0
Halogen-free, silicone-free
Accessories
Cable grommets 44 - 48
*Only valid for gray product types
176
Loading...