up to
ISO 4892-2A
KT large
KTA
Type Order No. Clamping range PU
gray
KTF
Grommets for KEL-JUMBO
KTF
KTF 00 42371 Blank grommet 1
KTA 42370
KTF 34 42376 33 - 36 mm 1
KTF 38 42379 37 - 40 mm 1
KTF 42 42382 41 - 44 mm 1
KTF 46 42385 45 - 48 mm 1
KTF 50 42388 48 - 52 mm 1
KTF 54 42391 53 - 56 mm 1
Adapter grommet
for KT large
Product Description
The grommets KTF are suitable for cable diameters
1
up to 65 mm.
Suitable for KEL-JUMBO cable entry frames.
Cables with a comparatively smaller diameter can
be utilized with KEL-JUMBO frames by using an
adapter grommet.
Speci cations
Material
Flame class
IP rating
NEMA type rating
Temperature
Properties
Elastomer
UL94-V0
IP54
NEMA type 12 (acc. to UL 50E)
- 40°C to + 90°C (static)
- 40°F to + 194°F (static)
Halogen-free, silicone-free
Compatible with
KEL-JUMBO Cable entry frames
34
KTF 58 42394 56 - 60 mm 1
KTF 62 42397 61 - 65 mm 1
www.icotek.com
Accessories
KT Cable grommets, large
35
46
KDR-ESR
Enclosure Base Plate with Slide Frames
KDR-ESR Assembly
Product Description
The KDR-ESR is a one-piece plate to be assembled on
enclosure bases. Slide frames for the KEL cable entry
frames are already preassembled.
After installing all cables into the KEL frames, they
are easily and quickly inserted into the slide frames
and xed. During maintenance, the KEL frames are
removed without tools from the slide frames. Due to
the combination KDR-ESR and KEL cable entry frames,
a rating of IP54 is achieved (with correct selection of
cable grommets). Slide frames which are no longer
required, are closed with BPK-SNAP Blank plates.
Advantages & Bene ts
Easy assembly and removal
During assembly, almost the complete base of the
enclosure can be used for installation of cables
Even large connectors can be installed easily
The base plate KDR-ESR is designed for Rittal
enclosures TS8. Other sizes can be supplied
on request
No additional sheet metal work required
Retro tting possible without disconnecting
cables. Everything can be built around the cables
1
The base plate is xed in the
enclosure base. The KEL cable
entry frames are tted.
2
The KEL cable entry frames are
screwed together after tting.
3
Afterwards the KEL frames are
pushed into the Slide frames
and xed with the knurled
screws.
Speci cations
Material
Flame class
IP rating
Temperature
Properties
Base plate: Carbon steel, zinc-plated
KDR-ESR Frame: Polyamide (PA)
UL94-V0, self-extinguishing
IP54, with gasket and correct
selection of the cable grommets
- 40°C to + 90°C (static)
Halogen free, silicone free
Compatible with
KEL(-U) 16 / 24 Cable entry frames
KEL-JUMBO Cable entry frames
BPK-SNAP 16 / 24 Blank plates
4
Finally, the middle base plate
which is part of the standard
enclosure, moves together
with the KDR-ESR plates.
8 - 19
34
160
142
12
KDR-ESR
Enclosure Base Plate with Slide Frames
150
90
43,5
12
Sealing tape
Order No. 42999 (PU: 1 m)
100
43,5
Enclosure Enclosure Total length Sight size of base No. of possible cable entries Order No.
type width base plate plate opening JUMBO 1 JUMBO 2 KEL(-U) 16|... KEL(-U) 24|...
600 mm 458 mm 435 mm - - - 2 43079
TS8 600 mm 458 mm 435 mm - 1 - 1 43070
600 mm 458 mm 435 mm 1 - 2 - 43071
800 mm 658 mm 635 mm - - 1 3 43080
TS8 800 mm 658 mm 635 mm 1 - - 3 43072
35
800 mm 658 mm 635 mm - 1 - 2 43073
1000 mm
without division bar
TS8
TS8
TS8 1200 mm* 518 mm 495 mm 1 - - 2 43078
1000 mm
without division bar
1000 mm
without division bar
1000 mm*
with division bar
1000 mm*
with division bar
1000 mm*
with division bar
1200 mm* 518 mm 495 mm - - - 3 43083
858 mm 835 mm - - - 5 43081
858 mm 835 mm 1 - - 4 43074
858 mm 835 mm - 1 - 3 43075
420 mm 398 mm - - - 2 43082
420 mm 398 mm 1 - - 1 43076
420 mm 398 mm - 1 - 1 43077
1200 mm* 518 mm 495 mm - 1 - 1 43084
* in case both elds of the enclosure are equipped, 2 complete base plates are necessary.
www.icotek.com
143
Loading...