KEL 183 | KEL 183-E ATEX
Cable Entry Frames
up to
KEL 183-E
KEL 183
Product Description
The split cable entry frame KEL 183 enables the user
to route cables and tubes with a diameter of up to
75 mm (depending on the frame type) and to seal
them in accordance with IP54 / up to NEMA type 12.
For cables up to 35 mm the cable grommets KT can
be used. With these split cable grommets, pre-terminated cables can be routed. For cables up to 75
mm we have created the grommets KTMB for KEL
183. Those are not split and have a de ned area for
pushing the cable through. A at rubber gasket is
included in the shipment.
Advantages & Bene ts
Installation of cables up to 75 mm
Grommets allow rigid cables to be properly positioned and oriented during the installation process.
Retro ts, repairs and maintenance can be done
much more easily and quickly
Type Order No. Cut-out Grommets PU
KT 183 | KT large
KEL 183|2 ATEX 49496 180 × 80 mm 2|- 1
KEL 183|2 ATEX
with V2A screws
KEL 183|5 ATEX 49497 180 × 80 mm 1|4 1
KEL 183|5 ATEX
with V2A screws
KEL 183|8 ATEX 49498 180 × 80 mm -|8 1
KEL 183|8 ATEX
with V2A screws
KEL 183-E4 ATEX 49499 180 × 42 mm -|4 1
KEL 183-E4 ATEX
with V2A screws
KEL 183-E16 ATEX 49500 180 × 42 mm 16 KT small 1
49496.200 180 × 80 mm 2|- 1
49497.200 180 × 80 mm 1|4 1
49498.200 180 × 80 mm -|8 1
49499.200 180 × 42 mm -|4 1
KEL 183-E16 ATEX
Speci cations
Material
Flame class
IP rating
7
NEMA type rating
Temperature
Equipment group
Category
Zone
Test standard
Properties
Frame depth
Polyamide (PA)
UL94-V0
IP54, with gasket and correct
selection of cable grommets
NEMA type 12 (acc. to UL 50E)
- 30°C to + 90°C (static)
- 22°F to + 194°F (static)
II
2G, 3G, 2D, 3D
1 + 21, 2+22
EN 60079-0
Halogen-free, silicone-free
17 mm
with V2A screws
49500.200 180 × 42 mm 16 KT small 1
Accessories
KTMB 183 Cable grommets
Cable grommets
33
44 - 48
174