Icotek KEL 16 Catalog Page

up to
ISO 4892-2A
V2A
anti-corrosive
Slit grommets
Type Order No. Grommets PU Description
KEL 16|8 42168 8|- 10
KEL 16|8
with V2A screws
KEL 16|5 42165 4|1 10
KEL 16|5
with V2A screws
42168.200 8|- 10
42165.200 4|1 10
Also available with stainless steel screws (V2A).
small | large
58
5,8
58
Also available with threaded bushings.
120 103
32
120 103
32
Page 170
KEL 16
Cable Entry Frames
Product Description
Centrally split cable entry system for routing cables with connectors, providing an IP54 / up to NEMA type 12 rating. The slit grommet matching the cable diameter is placed around the cable and inserted into the cable entry frame. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The split cable entry frame KEL 16 matches exactly the cut-out dimensions of 16-pin standard industrial connectors. A  at rubber gasket is included in the shipment.
KEL 16|4 42164 4|- 10
KEL 16|4
with V2A screws
KEL 16|2 42162 -|2 10
KEL 16|2
with V2A screws
42164.200 4|- 10
42162.200 -|2 10
5,8
58
5,8
58
5,8
32
32
120 103
120 103
Warranty on pre-terminated cables remains Retro ts, repairs and maintenance can be done much more easily and quickly High cable density, wide variety of grommets Strain relief according to EN 62444 High stability, vibration resistant
Speci cations
Material Flame class IP rating
NEMA type rating Temperature
Properties Cut-out dimensions Frame depth
Polyamide (PA) UL94-V0 IP54, with gasket and correct selection of cable grommets (certi ed acc. to EN 60529) NEMA type 12 (acc. to UL 50E)
- 40°C to + 140°C (static)
- 40°F to + 284°F (static) Halogen-free, silicone-free 36/46 × 86 mm / Page 192 - 193 17 mm
Accessories
www.icotek.com
Cable grommets KEL-SNAP Mounting frames KEL-EMC Grounding mounts KDR Base plates FP Flange plates
19
44 - 48 36 - 37 122 - 124 142 - 151 152 - 157
Loading...