Icotek KEL 10 Catalog Page

up to

ISO 4892-2A

Page 170

KEL 10

Cable Entry Frames

V2A

anti-corrosive

Slit grommets

Also available with stainless steel screws (V2A).

Description Type Order No. Grommets PU

Product Description

Centrally split cable entry system for routing cables with connectors, providing an IP54 / up to NEMA type 12 rating. The slit grommet matching the cable diameter is placed around the cable and inserted into the cable entry frame. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The split cable entry frame KEL 10 matches exactly the cut-out dimensions of 10-pin standard industrial connectors. A  at rubber gasket is included in the shipment.

5,8

98,3

KEL 10|6 42216 6|- 10

KEL 10|6

with V2A screws

KEL 10|3 42212 2|1 10

Also available with threaded bushings.

small | large

42216.200 6|- 10

Advantages & Bene ts

Warranty on pre-terminated cables remains Retro ts, repairs and maintenance can be done much more easily and quickly High cable density, wide variety of grommets Strain relief according to EN 62444 High stability, vibration resistant

Speci cations

Material Flame class IP rating

NEMA type rating Temperature

Properties Cut-out dimensions Frame depth

Polyamide (PA) UL94-V0 IP54, with gasket and correct selection of cable grommets (certi ed acc. to EN 60529) NEMA type 12 (acc. to UL 50E)

- 40°C to + 140°C (static)

- 40°F to + 284°F (static) Halogen-free, silicone-free 36/46 × 65 mm / Page 192 - 193 17 mm

Accessories

5,8

KEL 10|3

with V2A screws

42212.200 2|1 10

Cable grommets KEL-SNAP Mounting frames KEL-EMC Grounding mounts

44 - 48 36 - 37 122 - 124