How it Works
ICOP Technology
Loading...
VDX3-6724-2C-1G
User Manual
35 pgs1.27 Mb0

ICOP Technology VDX3-6724-2C-CF-1G, VDX3-6724-2G, VDX3-6724-CF-2G, VDX3-6724-2C-CF-2G, VDX3-6724-2C-2G User Manual

...
Download
ICOP Technology Inc.
User Manual
VDX3-6724
with
Half-Size CPU Module with
4S/4USB/VGA/LCD/LVDS/
AUDIO/2LAN/GPIO/
1/2GB DDR3 Onboard
Version 2.0
VDX3-6724 User Manual
ICOP Technology Inc. 1
Copyright
The information in this manual is subject to change without notice for continues improvement in the product. All rights are reserved. The manufacturer assumers no reasonability for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior to written permission of ICOP Technology Inc.
ⓒCopyright 2016 ICOP Technology Inc
Trademarks Acknowledgement
Vortex86DX3TM is the registered trademark of DM&P Electronics Inc.
Other brand names and product names that appear in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only.
VDX3-6724 User Manual
ICOP Technology Inc. 2
Revision History
Revision
Date
Remark
1.0
June 13, 2016
First release
2.0
June 8, 2016
New Add:
(1) Working temperature for Dual Core version (2) Cable set for VDX3-6724 with Compact
Flash
VDX3-6724 User Manual
ICOP Technology Inc. 3
Table of Contents
1 General Information ........................................................................................................................ 5
1.1 Overview ........................................................................................................................ 5
1.2 Block diagram ................................................................................................................. 5
1.3 Specifications .................................................................................................................. 6
1.4 Ordering Information ..................................................................................................... 8
2 Hardware Information ................................................................................................................... 10
2.1 Board Dimension .......................................................................................................... 10
2.2 Board Outline ............................................................................................................... 11
2.3 Connector and Jumper Location and Summary ............................................................. 12
2.4 Pin Assignments & Jumper Settings .............................................................................. 14
J1: LCD ............................................................................................................................. 14
J2: VGA ............................................................................................................................. 15
J3: LVDS (24-bit Support Only) ........................................................................................ 15
J4: SATA DOM ................................................................................................................. 15
J5: Power Connector (Terminal Block 5.0mm) .................................................................. 16
J6: SATA DOM POWER .................................................................................................. 16
J8: PS/2 KEYBOARD/MOUSE ...................................................................................... 16
J9: LAN1 (RJ45) ................................................................................................................ 16
J10: LAN2 ......................................................................................................................... 16
J11: USB0&1 ..................................................................................................................... 17
J12: USB2&3 ..................................................................................................................... 17
J13: GPIO (Port 6/7) ........................................................................................................ 17
J15: RESET ....................................................................................................................... 18
VDX3-6724 User Manual
ICOP Technology Inc. 4
J17: COM1 RS232/485 D-Sub 9 pin (Optional: TTL/ GPIO-P4) ..................................... 18
J18: COM2 RS232/485 (Optional: TTL/ GPIO-P5) ......................................................... 18
J20: COM5 RS232 (Optional: TTL/ GPIO-P0) ................................................................. 18
J22: COM6 RS232 (Optional: TTL/ GPIO-P1) ................................................................. 19
J24A: PC/104 Connector – 64 pin ..................................................................................... 20
J24B: PC/104 Connector – 40 pin ..................................................................................... 20
J28: Line-Out ..................................................................................................................... 21
J29: MIN-In ....................................................................................................................... 21
J30: Touch screen (Optional) ............................................................................................. 21
J31: Print............................................................................................................................ 22
3 Software Resources......................................................................................................................... 22
3.1 ICOP Technical Resource Website ............................................................................... 22
4 Basic BIOS Setting ......................................................................................................................... 23
4.1 Introduction .................................................................................................................. 23
4.2 CPU Clock Adjusting .................................................................................................... 23
4.3 Console Redirection ...................................................................................................... 23
4.4 Serial Ports Switching .................................................................................................... 24
4.5 IDE Configuration ........................................................................................................ 25
4.6 Advanced PCI-PnP Setting ........................................................................................... 26
4.7 ACPI Enable ................................................................................................................. 27
5 Basic LCD Panel Setting ............................................................................................... 28
5.1 Introduction ................................................................................................................ 28
5.2 Pin Assignment of LVDS ............................................................................................ 28
5.3 Basic BIOS Setting for LCD ....................................................................................... 29
Technical Support Directly from ICOP ................................................................................................ 31
User Manual Feedback ............................................................................................................................. 31
Appendix TFT Panel Data Output ........................................................................................................ 32
VDX3-6724 User Manual
ICOP Technology Inc. 5
Warranty ..................................................................................................................................................... 34
1 General Information
1.1 Overview
The VDX3-6724 is a low-power CPU module which compliant with ETX standard. It takes the
advantage of Vortex86DX3 1GHz x86 CPU which integrate the SATA, I2C, VGA, LVDS, PS/2,
USB, HD Audio and even with 16-bit ISA bus support.
The VDX3-6724 is designed as a plug in replacement, with backward compatibility to support
legacy software to help extend existing product life cycle without heavy re-engineering.
1.2 Block diagram
Board Block Diagram
VDX3-6724 User Manual
ICOP Technology Inc. 6
1.3 Specifications
Processor
DM&P SoC CPU Vortex86DX3 1GHz
L1:32K I-Cache, 32K D-Cache, L2 Cache:512KB
RAM
1GB/2GB DDR3 Onboard
Bus
PC/104 Standard Compliant
Watchdog Timer
Software programmable from 30.5 us to 512 seconds x2sets
Display
Integrated 2D VGA chip with dual display support
(VGA + TTL / VGA + LVDS)
VGA: Maximum resolution up to 1920x1080 @ 60Hz
LVDS: Maximum resolution up to 1024x768 @ 60Hz
Single channel 24-bit LVDS
LAN
Integrated 10/100Mbps Ethernet x1
Realtek 81111F 10/100/1000Mbps Ethernet x1
Audio
HD Audio
Optional
Interface
PS/2 touch controller x1
USB hot SWAP x1
I/O Interface
SATA 7P Connector x1
RS232 port x2
RS232/485 port x2
Parallel port x1
USB port (Ver. 2.0) x4
16-bit GPIO port x1
10/100Mbps Ethernet port x1
10/100/10000Mbps Ethernet port x1
VDX3-6724 User Manual
ICOP Technology Inc. 7
Connectors
SATA 7P for SATA x1, 2P for SATA Power x1
2.54mm 26-pin box header for Printer x1
2.54mm 20-pin box header for GPIO x1
2.54mm 10-pin box header for USB x2
2.54mm 10-pin box header for RS232 x3
2.54mm 2-pin header for Reset x1
2.0mm 44-pin box header for LCD x1
2.0mm 20-pin header for LVDS x1
2.0mm 8-pin header for Ethernet x1
1.25mm 4-pin wafer for Line-out/MIC-in x2
External RJ-45 connector for Ethernet x1
External Mini DIN connector for KBD/Mouse x1
External D-Sub 15 pins female connector for VGA x1
External D-Sub 9 pins male connector for RS232 x1
Flash Disk
Support
Compact Flash Type I/II (Optional)
Onboard eMMC 512MB/4GB (Optional)
Power
Requirement
Single Voltage +5V @1000mA (Typical)
Dimensions
184mm x 122mm (7.24 x 4.80 inches)
Weight
180g
Operating
Temp.
-20℃ ~ +70℃ (Single Core)
-10℃ ~ +60℃ (Dual Core)
-40℃ ~ +85℃ (Optional for Single Core)
-20℃ ~ +70℃ (Optional for Dual Core)
Operating
System Support
Free DOS, DOS 6.22, PCDOS 7.1, DR-DOS, x-DOS, OS/2, Windows 7,
Windows Embedded Standard 7, Windows Embedded Compact 7,
Windows Embedded Compact 6, Windows XP Professional, Windows
Embedded Standard(XPE), POS Ready(WePOS), Embedded Linux, QNX,
Vxworks and FreeBSD.
VDX3-6724 User Manual
ICOP Technology Inc. 8
1.4 Ordering Information
Part Number
Product Description
VDX3-6724-1G
Vortex86DX3 Half-Size CPU Module with 1GB DDR3
VDX3-6724-2G
Vortex86DX3 Half-Size CPU Module with 2GB DDR3
VDX3-6724-2C-1G
Vortex86DX3 Half-Size Dual Core CPU Module with 1GB DDR3
VDX3-6724-2C-2G
Vortex86DX3 Half-Size Dual Core CPU Module with 2GB DDR3
VDX3-6724-CF-1G
Vortex86DX3 Half-Size CPU Module with 1GB DDR3
with CF card slot
VDX3-6724-2C-CF-1G
Vortex86DX3 Half-Size Dual Core CPU Module with 1GB DDR3
with CF card slot
VDX3-6724-CF-2G
Vortex86DX3 Half-Size CPU Module with 2GB DDR3
with CF card slot
VDX3-6724-2C-CF-2G
Vortex86DX3 Half-Size Dual Core CPU Module with 1GB DDR3
with CF card slot
CABLE-6724-SET
GPIO (2.54) x1
RS-232 (2.54) x3
Audio Line x2
YKB x1
Printer (2.54) x1
USB (2.54) x2
NET 4x2 (2.0) x1
CABLE-6724-CF
RS-232 (2.54) x3
Audio Line x2
YKB x1
USB (2.54) x2
NET 4x2 (2.0) x1
ICOP-0096
Vortex86 LVDS 18-bit Converter Kit for LCD Panel Display
CABLE-LVDS-30
18-Bit LVDS Cable
*Default setting for processor on VDX3-6724 is Single-core. If Dual-core processor is required,
please contact ICOP (info@icop.com.tw).
VDX3-6724 User Manual
ICOP Technology Inc. 9
Storages:
Product Name
MLC
SLC
0℃ ~ +70℃
-40℃ ~ +85℃
SDM-SST-2G-H-M
V V SDM-SST-4G-H-M
V V ISATA-8G-H-M
V V ISATA-16G-H-M
V V ISATA-32G-H-M
V V ISATA-4G-H-M-X
V V ISATA-8G-H-M-X
V V ISATA-16G-H-M-X
V V ISATA-32G-H-M-X
V V ISATA-1G-H-S
V V ISATA-2G-H-S
V V ISATA-4G-H-S
V V ISATA-8G-H-S
V V ISATA-16G-H-S
V V SDM-SST-2G-H-S-X
V V SDM-SST-4G-H-S-X
V
V
SDM-SST-8G-H-S-X
V
V
ISATA-16G-H-S-X
V
V
VDX3-6724 User Manual
ICOP Technology Inc. 10
2 Hardware Information
2.1 Board Dimension
VDX3-6724 User Manual
ICOP Technology Inc. 11
2.2 Board Outline
VDX3-6724
Note:
1. COM RS232/485 is selected by BIOS.
2. Touch screen is optional. If touch screen function is selected, onboard SPI ROM and PS/2
function will be disabled.
3. GPIO will be occupied when eMMC is selected on VDX3-6754.
4. LPT, eMMC, and GPIO are not available on VDX3-6754-CF.
5. CF card slot is only available on VDX3-6754-CF. (See the image below)
VDX3-6724 User Manual
ICOP Technology Inc. 12
2.3 Connector and Jumper Location and Summary
Jumper Location:
VDX3-6724 User Manual
ICOP Technology Inc. 13
Jumper Summary:
Nbr.
Name
Type of Connections
Pin Nbr
J1
LCD
Box Header, 2.0mm, 2x22
44
J2
VGA
15-pin D-Sub Female
15
J3
24-bit LVDS
Pin Header, 2.0mm, 10x2
20
J4
SATA DOM
SATA 7P Connector, 7x1
7
J5
Power Connector
Terminal Block, 5.0mm, 2x1
2
J6
SATA DOM Power
Box Header, 2.0mm, 1x2
2
J8
PS/2 Keyboard/Mouse
Mini-DIN Female
6
J9
LAN1
RJ45 Connector
8
J10
LAN2
Pin Header, 2.0mm, 4x2
8
J11
USB0&1
Box Header, 2.54mm, 5x2
10
J12
USB2&3
Box Header, 2.54mm, 5x2
10
J13
GPIO (Port6/7)
Box Header, 2.54mm, 10x2
20
J15
Reset
Pin Header, 2.54mm, 1x2
2
J17
COM1(RS232/485 or optional TTL/P4)
D-Sub Male
9
J18
COM2(RS232/485 or optional TTL/P5)
Box Header, 2.54mm, 5x2
10
J20
COM5(RS232/485 or optional TTL/P0)
Box Header, 2.54mm, 5x2
10
J22
COM6(RS232/485 or optional TTL/P1)
Box Header, 2.54mm, 5x2
10
J24A
PC104 Connector – 64 pins
Box Header, 2.54mm, 32x2
64
J24B
PC104 Connector – 40 pins
Box Header, 2.54mm, 20x2
40
J28
Line-Out
Wafer, 1.25mm, 4x1
4
J29
MIC-In
Wafer, 1.25mm, 4x1
4
J30
Touch screen Controller
(Optional)
Wafer, 1.25mm, 4x1
4
J31
Print
Box Header, 2.0mm, 13x2
26
J34
Master/Slave for CF Card
Slide switch
3
CF1
CF card slot
SP1
Buzzer
VDX3-6724 User Manual
ICOP Technology Inc. 14
2.4 Pin Assignments & Jumper Settings
J1: LCD
Pin#
Single Name
Pin #
Single Name
1
+3.3V
2
+3.3V
3
LG2
4
LG3
5
LG4
6
LG5
7
NC 8 NC
9
LR0
10
LR1
11
LR2
12
LR3
13
LR4
14
LR5
15
GND
16
NC
17
NC
18
NC
19
NC
20
GND
21
NC
22
NC
23
LB0
24
LB1
25
LB2
26
LB3
27
LB4
28
LB5
29
NC
30
NC
31
LG0
32
LG1
33
GND
34
GND
35
NC
36
LCLK
37
NC
38
LDE
39
NC
40
LHSYNC
41
NC
42
LVSYNC
43
LBACKL
44
LVDDEN
(Please refer to Appendix for TFT Flat Panel Data Output)
VDX3-6724 User Manual
ICOP Technology Inc. 15
J2: VGA
Pin#
Single Name
Pin #
Single Name
1.
R OUT
2
G OUT
3
B OUT
4
NC
5
GND
6
GND
7
GND
8
GND
9
NC
10
GND
11
NC
12
DDCDAT
13
HSYNC
14
VSYNC
15
DDCCLK
J3: LVDS (24-bit Support Only)
J4: SATA DOM
Pin#
Single Name
Pin #
Single Name
1
VCC3 (+3.3V)
2
VCC3 (+3.3V)
3
GND
4
GND
5
RxIN0+
6
RxIN0-
7
RxIN1-
8
GND
9
GND
10
RxIN1+
11
RxIN2+
12
RxIN2-
13
CKIN-
14
GND
15
GND
16
CKIN+
17
RxIN3-
18
GND
19
GND
20
GxIN3+
Pin#
Single Name
Pin #
Single Name
1
GND
2
TX+
3
TX-
4
GND
5
RX-
6
RX+
7
GND
VDX3-6724 User Manual
ICOP Technology Inc. 16
J5: Power Connector (Terminal Block 5.0mm)
J6: SATA DOM POWER
J8: PS/2 KEYBOARD/MOUSE
J9: LAN1 (RJ45)
J10: LAN2
Pin#
Single Name
1
+5V
2
GND
Pin#
Single Name
Pin #
Single Name
1
VCC
2
GND
Pin#
Single Name
Pin #
Single Name
1
KBCLK
2
MSCLK
3
GND
4
KBDAT
5
MSDAT
6
VCC
7
GGND
8
GGND
9
GGND
Pin#
Single Name
Pin #
Single Name
1
ATX+
2
ATX-
3
ARX+
4
LED0
5
LED0+
6
ARX-
7
LED1+
8
LED1
Pin#
Single Name
Pin #
Single Name
1
ATX+
2
ATX-
3
ARX+
4
LED0
5
LED0+
6
ARX-
7
LED1+
8
LED1
VDX3-6724 User Manual
ICOP Technology Inc. 17
J11: USB0&1
Pin#
Single Name
Pin #
Single Name
1.
VCC
2
VCC
3
LUSBD0-
4
LUSBD0-
5
LUSBD0+
6
LUSBD1+
7
GND
8
GND
9
GGND
10
GGND
J12: USB2&3
Pin#
Single Name
Pin #
Single Name
1.
VCC
2
VCC
3
LUSBD2-
4
LUSBD3-/LUSBD4-
5
LUSBD2+
6
LUSBD3+/LUSBD4+
7
GND
8
GND
9
GGND
10
GGND
*USB3 will be replaced by USB4 when DOS USB Hot Swap function is enabled
(Optional)
J13: GPIO (Port 6/7)
Pin#
Single Name
Pin #
Single Name
1.
GND
2
VCC
3
GP60/SDA_D2
4
GP70
5
GP61/SDA_D3
6
GP71
7
GP62/SDA_CMD
8
GP72
9
GP63/SDA_CLK
10
GP73
11
GP64/SDA_D0
12
GP74
13
GP65/SDA_D1
14
GP75
15
GP66/SDA_CD
16
GP76
17
GP67/SDA_WP
18
GP77
19
VCC
20
GND
*When onboard eMMC is enabled, GPIO will be disabled.
**Not available on VDX3-6724-CF
VDX3-6724 User Manual
ICOP Technology Inc. 18
J15: RESET
Pin#
Single Name
Pin #
Single Name
1.
RST_SW
2
GND
J17: COM1 RS232/485 D-Sub 9 pin (Optional: TTL/ GPIO-P4)
Pin#
Single Name
Pin #
Single Name
1.
DCD1/1RS485-
2
RXD1/1RS485+
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
10
NC
J18: COM2 RS232/485 (Optional: TTL/ GPIO-P5)
Pin#
Single Name
Pin #
Single Name
1.
DCD2/2RS485-
2
RXD2/2RS485+
3
TXD2
4
DTR2
5
GND
6
DSR2
7
RTS2
8
CTS2
9
RI2
10
NC
J20: COM5 RS232 (Optional: TTL/ GPIO-P0)
Pin#
Single Name
Pin #
Single Name
1.
DCD5
2
RXD5
3
TXD5
4
DTR5
5
GND
6
DSR5
7
RTS5
8
CTS5
9
RI5
10
NC
VDX3-6724 User Manual
ICOP Technology Inc. 19
J22: COM6 RS232 (Optional: TTL/ GPIO-P1)
Pin#
Single Name
Pin #
Single Name
1.
DCD6
2
RXD6
3
TXD6
4
DTR6
5
GND
6
DSR6
7
RTS6
8
CTS6
9
RI6
10
NC
VDX3-6724 User Manual
ICOP Technology Inc. 20
J24A: PC/104 Connector – 64 pin
Pin#
Single Name
Pin #
Single Name
1.
IOCHCHK*
2
GND
3
SD7
4
RESETDRV
5
SD6 6 VCC
7
SD5 8 IRQ9
9
SD4
10
-5V
11
SD3
12
RDQ2
13
SD2
14
-12V
15
SD1
16
OWS
17
SD0
18
+12V
19
IOCHRDY
20
GND
21
AEN
22
SMEMW*
23
SA19
24
SMEMR*
25
SA18
26
IOW*
27
SA17
28
IOR*
29
SA16
30
DACK3*
31
SA15
32
DRQ3
33
SA14
34
DACK1*
35
SA13
36
DRQ1*
37
SA12
38
REFRESH*
39
SA11
40
SYSCLK
41
SA10
42
IRQ7
43
SA9
44
IRQ6
45
SA8
46
IRQ5
47
SA7
48
IRQ4
49
SA6
50
IRQ3
51
SA5
52
DACK2*
53
SA4
54
TC
55
SA3
56
BALE
57
SA2
58
VCC
59
SA1
60
OSC
61
SA0
62
GND
63
GND
64
GND
J24B: PC/104 Connector – 40 pin
Pin#
Single Name
Pin #
Single Name
1.
GND
2
GND
3
MEMCS16*
4
SBHE*
5
IOCS16*
6
SA23
7
IRQ10
8
SA22
9
IRQ11
10
SA21
11
IRQ12
12
SA20
13
IRQ15
14
SA19
15
IRQ14
16
SA18
17
DACK0*
18
SA17
19
DRQ0
20
MEMR*
21
DACK5*
22
MEMW*
23
DRQ5
24
SD8
25
DACK6*
26
SD9
27
DRQ6
28
SD10
29
DACK7
30
SD11
31
DRQ7
32
SD12
33
VCC
34
SD13
35
MASTER*
36
SD14
37
GND
38
SD15
39
GND
40
NC
VDX3-6724 User Manual
ICOP Technology Inc. 21
J28: Line-Out
Pin#
Single Name
1.
LOUTR
2
GND
3
GND
4
LOUTL
J29: MIN-In
J30: Touch screen (Optional)
**If touchscreen function is enabled, SPI ROM will be disabled.
Pin#
Single Name
1
MICVREF
2
GND
3
GND
4
MIC-IN
Pin#
Single Name
1
Y- 2 X- 3 Y+ 4 X+
VDX3-6724 User Manual
ICOP Technology Inc. 22
J31: Print
Pin#
Single Name
Pin #
Single Name
1
STB-
14
AFD-
2
PD0
15
ERR-
3
PD1
16
INIT-
4
PD2
17
SLIN-
5
PD3
18
GND
6
PD4
19
GND
7
PD5
20
GND
8
PD6
21
GND
9
PD7
22
GND
10
ACK-
23
GND
11
BUSY
24
GND
12
PE
25
GND
13
SLCT
26
NC
**Not available on VDX3-6724-CF
3 Software Resources
3.1 ICOP Technical Resource Website
In the following website, you will find our latest user manuals, including OS support resources systems such as evaluation images for Windows Embedded Compact 7, Windows Embedded CE6.0, and Windows XP Embedded (Win XPe), etc. For details, please visit the link below:
http://tech.icop.com.tw/
VDX3-6724 User Manual
ICOP Technology Inc. 23
4 Basic BIOS Setting
4.1 Introduction
Featuring AMI BIOS, the VDX3-6724 module is a one stable module board for your applications. In this section, we will introduce you some basic AMI BIOS setting such as CPU speed adjusting, console redirection, and IDE configuration, etc.
4.2 CPU Clock Adjusting
For CPU clock adjusting, please contact your contact window directly or mail
info@icop.com.tw.
4.3 Console Redirection
Access to computer board through serial port, you can work on VDX3-6724 without VGA display or monitor. The default access port is COM1 and disabled. If you would like to use this function, please go to the path below to enable Console Redirection.
Path: Advanced >Remote Access Configuration >Remote Access [Enabled]
VDX3-6724 User Manual
ICOP Technology Inc. 24
4.4 Serial Ports Switching
Serial ports on VDX3-6724 are set RS232 as default. If you need RS485 be your default serial ports. Please contact your contact window directly or mail info@icop.com.tw. And you can refer to the below instruction to select the IRQ mode according to your demands.
Path: Advanced >Serial/Parallel Port Configuration
VDX3-6724 User Manual
ICOP Technology Inc. 25
4.5 IDE Configuration
The default IDE configuration is for Windows Operating System, and the setting as below:
Onboard IDE Operate Mode: [Legacy Mode]
IDE Compatibility: [Disabled].
If you would like to use Linux on VDX3-6724, please follow below instructions:
Onboard IDE Operate Mode: [Native Mode]
IDE Compatibility: [Enabled].
Path of Onboard IDE Operate Mode:
Advanced >IDE Configuration >Onboard IDE Operate Mode [Native Mode]
VDX3-6724 User Manual
ICOP Technology Inc. 26
4.6 Advanced PCI-PnP Setting
Two statuses for IRQ setting:
[Reserved]: IRQ will free to be allocated by PnP BIOS. [Available]: IRQ will not free to be allocated by PnP BIOS.
Path: PCIPnP >IRQ
VDX3-6724 User Manual
ICOP Technology Inc. 27
4.7 ACPI Enable
To install Windows 7 on ICOP computer boards, please enable ACPI as the following instruction.
Path: Advanced >Power Management Configuration > ACPI Configuration >ACPI Aware O/S
VDX3-6724 User Manual
ICOP Technology Inc. 28
5 Basic LCD Panel Setting
5.1 Introduction
The VDX3-6724 offers two different interfaces which support maximum resolution up to
1920 x 1080 (at 60 MHz) connecting to VGA and LCD Flat Panel with 18-bit/24bit LVDS.
The default setting of Boot Display Device [VBIOS] and LCD Panel
Index [VBIOS] with Clone Display [ENBALED] support dual display (LCD and
VGA) on VDX3-6726.
If your VGA display shifts because of the above setting, please switch Boot Display
Device [VBIOS] to [CRT] as the following image:
**Boot Display Device [VBIOS]: LCD and VGA display supported with display setting based
on your required LCD specification.
[CRT]: VGA display supported
5.2 Pin Assignment of LVDS
Please refer Page 20 for LVDS pin assignment.
VDX3-6724 User Manual
ICOP Technology Inc. 29
5.3 Basic BIOS Setting for LCD
If you would like to use LCD panel with VDX3-6726, please follow below instruction:
Boot Display Device [VBIOS]
LCD Panel Index according to your LCD resolution from VBIOS to 5.
Options
Resolution of the LCD Panel
VBIOS
the Required LCD Specification
1
640 x 480
2
800 x 480
3
800 x 600
4
1024 x 600
5
1024 x 768
Path of Boot Display Device setting: Boot >Boot Settings Configuration >Boot Display Device [VBIOS]
VDX3-6724 User Manual
ICOP Technology Inc. 30
Path of LCD Panel Index setting:
Boot >Boot Settings Configuration >LCD Panel Index [ ]
***The [VBIOS] difference between Boot Display Device and LCD Panel Index:
Boot Display Device [VBIOS]: Display Output Setting
LCD Panel Index [VBIOS]: Display Resolution Setting
VDX3-6724 User Manual
ICOP Technology Inc. 31
Technical Support Directly from ICOP
To offer you more accurate and specific solutions for the technical situations you have, please prepare the information below before contacting ICOP:
—Product name and serial number
—Description of the H/W environment ( i.e.: working temperature, I/O
board information, information of connection between main board and IO boards, and/or other devices, etc)
—Description of the S/W environment (i.e: operating system, version,
application software, and/or other related information, etc.)
—A detailed description and photos of the technical situation
—Any complement or technical situations you want ICOP more
focusing on
User Manual Feedback
To make this user manual more complete, if you have any comments or feedbacks to this manual, please feel free to write to info@icop.com.tw or contact your ICOP sales representative.
VDX3-6724 User Manual
ICOP Technology Inc. 32
Appendix TFT Panel Data Output
LCD Pin#
Single Name
Digital 18 Bits
RGB 24 Bits
1
LCDVCC (+3.3)
VDD
VDD
2
LCDVCC (+3.3)
VDD
VDD
3
FPD12
G2
G4
4
FPD13
G3
G5
5
FPD14
G4
G6
6
FPD15
G5
7
7
FPD16
/
R0
8
FPD17
/
R1
9
FPD18
R0
R2
10
FPD19
R1
R3
11
FPD20
R2
R4
12
FPD21
R3
R5
13
FPD22
R4
R6
14
FPD23
R5
R7
15
GND
VSS
VSS
16
NC / /
17
NC / /
18
NC / /
19
NC / /
20
GND
VSS
VSS
21
FPD0
/
B0
22
FPD1
/
B1
23
FPD2
B0
B2
24
FPD3
B1
B3
25
FPD4
B2
B4
26
FPD5
B3
B5
27
FPD6
B4
B6
28
FPD7
B5
B7
29
FPD8
/
G0
30
FPD9
/
G1
31
FPD10
G0
G2
32
FPD11
G1
G3
33
GND
VSS
VSS
VDX3-6724 User Manual
ICOP Technology Inc. 33
LCD#
Single Name
Digital 18 Bits
RGB 24 Bits
34
GND
VSS
VSS
35
NC / /
36
FP1CLK
XCLK
XCLK
37
NC / /
38
FP1DE
DEN
DEN
39
NC / /
40
FP1HS
HSYNC
HSYNC
41
NC / /
42
FP1VS
VSYNC
VSYNC
43
FPENBLT
ADJ
ADJ
44
FPENVDD
VDDEN
VDDEN
VDX3-6724 User Manual
ICOP Technology Inc. 34
Warranty
This product is warranted to be in good working order for a period of one year (12 months) from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it without additional charge except as set forth in the following terms. This warranty does not apply to products damaged by misuse, modifications, accident or disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other incidental or consequential damage resulting from the use, misuse of, originality to use this product. Vendor will not be liable for any claim made by any other related party. Return authorization must be obtained from the vendor before returned merchandise is accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear problem description. Should you have questions about warranty and RMA service, please contact us directly.
ICOP Technology Inc.
Address: No. 15 Wugong 5th Road, Xinzhuang Dist.
New Taipei City, Taiwan (R.O.C.) 24890 TEL: +886-2-8990-1933 FAX: +886-2-8990-2045 Mail: info@icop.com.tw Website: http://www.icop.com.tw
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use