ICOP VSX-6115-V2 User Manual
VSX-6115-V2
DM&P Vortex86SX 300MHz
Tiny CPU Module
with 4S/2USB/LAN/2GP IO
128MB DDR2 Onboard
User’s Manual
(Revision 1.1 A)
Copyright
The information in this manua l is subject to cha nge without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part ,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2007 ICOP Technology Inc.
Manual No. IUM6115-V2000-01 Ver.1.0A
October, 2009
Manual No. IUM6115-V2000-01 Ver.1.1A
May, 2010
Trademarks Acknowledgment
Vortex86SX is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................1
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline.........................................................5
2.2 Connectors & Jumpers Location............................6
2.3 Connectors & Jumpers Summary...........................8
2.4 Pin Assignments & Jumper Settings.......................9
2.5 System Mapping...................................................15
2.6 Watchdog Timer...................................................18
2.7 GPIO....................................................................19
2.8 SPI flash...............................................................20
C h a p t e r 3 Driver Installation……………………………………21
Appendix ………………………………………………………………..22
A. TCP/IP library for DOS real mode.............................22
B. BIOS Default Setting.................................................23
Warranty............................................................................................24
Vortex86SX-6115-V2 Vortex86SX Tiny CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VSX-6115-V2
Embedded Vortex86SX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
PRINT cable x1
IDE cable x 1
USB cable x 1 (USB port x 2)
GPIO cable x 2
PS/2 Keyboard cable x 1
(Note1: VGA function support (ICOP-2720) via x-ISA Interface)
ICOP-2720:
http://www.icop.com.tw/DB/upload/manual/ICOP-2720_Manual%20.pdf
Vortex86SX-6115-V2 Vortex86SX Tiny CPU Module
2
1.2 Product Description
The VSX-6115-V2 family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
300MHz Vortex86SX System-On-Chip
128 / 256MB DDR2 system memory
Enhanced IDE
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
Parallel port
16-bit GPIO x2
x-ISA bus
RS-485 with Auto Direction
2 watchdog timer
SRAM support (Optional)
JTAG interface
AMI BIOS
2MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VSX-6115-V2 Tiny family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Tiny controller . The VSX-6115-V2 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VSX-6115-V2 is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller , AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as Tiny.
Vortex86SX-6115-V2 Vortex86SX Tiny CPU Module
3
1.3 Specifications
Features VSX-6115-V2
CPU
DM&P SoC CPU Vortex86SX- 30 0MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D- Cache
BIOS
AMI BIOS
Bus Interface
16-bit x-ISA in terface
System Memory
128 / 256MB DDR2 Onboard
Watchdog Timer
Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN
Integrated 10/100M Ethernet
I /O Interface
Enhanced IDE port x1
RS-232 port x3
RS-232/422/485 port x1 (RS485 with Auto Direction)
Parallel port x1
USB port x2 (USB 2.0 version)
16-bit GPIO port x2
10/100Mbps Ethernet port x1
Connectors
2.00 mm 44-pin box header for IDE x1
2.00 mm 26-pin box header for Print x1
2.00 mm 20-pin b ox header for 16-bit GPIO x2
2.00 mm 10-pin box header for RS-232 x4
2.00 mm 10-pin box header for USB x1
2.00 mm 2-pin header for Reset x1
2.00 mm 2-pin header for Console Redirection x1
2.54 mm 3-pin header for RS-485 x1
2.54 mm 5-pin box header for keyboard x1
2.54 mm 2-pin header for LINK LED x1
2.54 mm 2-pin header for TX/RX LED x1
1.25mm 6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 2MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
SRAM support
512KB (Optional)
Power Requirement
Single Voltage +5V @ 380mA
Dimension
100mm X 66mm (3.94 x2.6 inches)
Weight
63g
Operating
Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)
Vortex86SX-6115-V2 Vortex86SX Tiny CPU Module
4
1.4 Board Dimension
Vortex86SX-6115-V2 Vortex86SX Tiny CPU Module
5
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: VGA function support (ICOP-2720) via x-ISA Interface)
ICOP-2720:
http://www.icop.com.tw/DB/upload/manual/ICOP-2720_Manual%20.pdf
(Note2: COM2 RS232/422/485 is selected by BIOS setting)
(Note3: J21: Default setti ng of JTAG Has to be Disable: Pin 1 & Pin 2 short)
(Note4: VSX-6115-V2-256 is optional)
Vortex86SX-6115-V2 Vortex86SX Tiny CPU Module
6
2.2 Co nnectors & Jumpers Location
Connectors
Loading...